From c771912b189468a837289152dd515290bbd4bcbe Mon Sep 17 00:00:00 2001 From: Candas1 Date: Thu, 19 Nov 2020 23:49:44 +0100 Subject: [PATCH] Updated Control IBUS (markdown) --- Control---IBUS.md | 1 + 1 file changed, 1 insertion(+) diff --git a/Control---IBUS.md b/Control---IBUS.md index 1171523..b7403d2 100644 --- a/Control---IBUS.md +++ b/Control---IBUS.md @@ -11,6 +11,7 @@ If the board is beeping * Check the number of channels, even if you transmitter only handles 6 channels, you receiver might transmit more channels * Make sure you enabled PPM on your transmitter * Make sure you are using the sensor cable(left or right) you selected in config.h +* On some board the wire colors might differ, try the blue wire ⚠ Red wire from sensor cable delivers 15v !!! Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator. \ No newline at end of file