From c7e15d4c195e2fdd6d5fdf603f96dfadedce925c Mon Sep 17 00:00:00 2001 From: Candas1 Date: Mon, 8 Nov 2021 16:33:04 +0100 Subject: [PATCH] Updated Input Calibration (markdown) --- Input-Calibration.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Input-Calibration.md b/Input-Calibration.md index 1bd1c52..c5fa75a 100644 --- a/Input-Calibration.md +++ b/Input-Calibration.md @@ -50,4 +50,5 @@ The limits will be saved/overwritten in flash memory when you turn the board off ⚠The limits will be persisted in flash memory even if you flash the firmware again, the only way to delete it is to fully erase the chip in st-utility before flashing.
An alternative to bypass those limits is to change **FLASH_WRITE_KEY** in [config.h](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/blob/master/Inc/config.h). -If you have no use of auto-calibration feature and want to turn it off not to accidentally start this mode, you can disable it in [config.h](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/blob/master/Inc/config.h) by commenting parameter AUTO_CALIBRATION_ENA. \ No newline at end of file +If you have no use of auto-calibration feature and want to turn it off not to accidentally start this mode, you can disable it in [config.h](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/blob/master/Inc/config.h) by commenting parameter AUTO_CALIBRATION_ENA.
+Firmware will still use previously saved auto-calibration values. \ No newline at end of file