EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 02:24:26 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant PWM (markdown)

Candas1
2022-04-08 11:37:37 +02:00
parent 2c002e9746
commit ca4efbe22a
1 changed files with 2 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
Variant-PWM.md

@@ -7,12 +7,11 @@ You can use CONTROL_PWM_LEFT instead if you need to use the left sensor cable.<b
DEBUG_SERIAL will be automatically enabled on the opposite cable.<br> DEBUG_SERIAL will be automatically enabled on the opposite cable.<br>
## Wiring: ## Wiring:
* Connect your receiver VCC to 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!!
* Connect channel 1(steering) of your receiver to blue wire and channel 2(speed) to green wire of the cable selected in config.h * Connect channel 1(steering) of your receiver to blue wire and channel 2(speed) to green wire of the cable selected in config.h
* Connect the receiver to ground, ⚠️ On some boards, the black wire is 15v !!! Check with a multi-meter to make sure 15V and ground are not swapped
* PWM is highly prone to noise : keep cables short, use 100nf capacitors, use shielded cable, use ferrites, stabilize voltage * PWM is highly prone to noise : keep cables short, use 100nf capacitors, use shielded cable, use ferrites, stabilize voltage
⚠ Red wire from sensor cable delivers 15v !!!
Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.
## Transmitter configuration: ## Transmitter configuration:
* Assign desired joystick to channel 1(steering) and channel 2(throttle) * Assign desired joystick to channel 1(steering) and channel 2(throttle)