EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-06 19:14:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Battery (markdown)

Candas1
2023-05-31 10:09:30 +02:00
parent ed47b382b3
commit cb102a9e63
1 changed files with 3 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
Battery.md

@@ -49,7 +49,7 @@ Battery voltage has to be calibrated to have a more accurate reading, for this y
* Value BatV(6) in Debug Serial should match with the measured battery voltage now * Value BatV(6) in Debug Serial should match with the measured battery voltage now
## :toolbox: Troubleshooting: ## :toolbox: Troubleshooting:
If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics) because of low battery level or turning off with the melody ### If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics) because of low battery level or turning off with the melody
* Make sure you have updated the number of cells in [config.h](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/blob/master/Inc/config.h) if you use a battery with less cells in series * Make sure you have updated the number of cells in [config.h](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/blob/master/Inc/config.h) if you use a battery with less cells in series
* [Calibrate the battery voltage](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery#calibration) * [Calibrate the battery voltage](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery#calibration)
* With a battery of low quality/bad health, pulling a lot of current will result in a big battery voltage drop and trigger battery low alerts. You can use a better battery or several similar batteries in parallel * With a battery of low quality/bad health, pulling a lot of current will result in a big battery voltage drop and trigger battery low alerts. You can use a better battery or several similar batteries in parallel
@@ -61,11 +61,11 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac
You can turn off the battery dead power off with BAT_DEAD_ENABLE parameter for debugging.<br> You can turn off the battery dead power off with BAT_DEAD_ENABLE parameter for debugging.<br>
<br> <br>
If the board turns off without the melody, the BMS is shutting the power off ### If the board turns off without the melody, the BMS is shutting the power off
* You are drawing too much current which triggers the over-discharge protection of your BMS. You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) but you will reduce the power * You are drawing too much current which triggers the over-discharge protection of your BMS. You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) but you will reduce the power
* It can happen if your battery is fully charged and too much current is flowing back (regenerative braking), it can trigger overcharge protection of your BMS * It can happen if your battery is fully charged and too much current is flowing back (regenerative braking), it can trigger overcharge protection of your BMS
* When using phase advance/field weakening and braking, a voltage higher than the battery voltage can flow back to the battery and trigger the over-voltage protection of your BMS * When using phase advance/field weakening and braking, a voltage higher than the battery voltage can flow back to the battery and trigger the over-voltage protection of your BMS
You will have to unplug the battery and plug it again You will have to unplug the battery and plug it again
The board is not turning off when you push the ON/OFF button: ### The board is not turning off when you push the ON/OFF button:
* This might happen is you are using a battery that has too low voltage * This might happen is you are using a battery that has too low voltage