From cbbca3678d837ef0ce161d96c611d1f50425b361 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Sat, 21 Nov 2020 10:44:59 +0100 Subject: [PATCH] Updated Control PPM (markdown) --- Control---PPM.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Control---PPM.md b/Control---PPM.md index 6960f9c..5a80e87 100644 --- a/Control---PPM.md +++ b/Control---PPM.md @@ -10,7 +10,7 @@ Default number of channels for PPM in config.h is 6. If the board is beeping * Check the number of channels, even if you transmitter only handles 6 channels, you receiver might transmit more channels * Make sure you enabled PPM on your transmitter -* Make sure you are using the sensor cable(left or right) you selected in config.h +* Make sure you are using the sensor cable(left or right) selected in config.h * On some boards the wire colors might differ, try the blue wire ⚠ Red wire from sensor cable delivers 15v !!!