From ce9424bf29a359bd867364388a1298ebcdbc98d4 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Mon, 27 Dec 2021 21:02:48 +0100 Subject: [PATCH] Updated Variant PPM (markdown) --- Variant-PPM.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Variant-PPM.md b/Variant-PPM.md index 8f92ff5..1a71323 100644 --- a/Variant-PPM.md +++ b/Variant-PPM.md @@ -25,4 +25,4 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac * Make sure you use the PPM port on your receiver * Make sure you are using the sensor cable(left or right) selected in config.h * On some boards the wire colors might differ, try the blue wire -* You might might have a defective input, because of a fried resistor or MCU pin (e.g. [issue](https://github.com/EFeru/hoverboard-firmware-hack-FOC/issues/244)), you can configure the firmware to work on the other cable \ No newline at end of file +* You might have a defective input, because of a fried resistor or MCU pin (e.g. [issue](https://github.com/EFeru/hoverboard-firmware-hack-FOC/issues/244)), you can configure the firmware to work on the other cable \ No newline at end of file