From d0c8c100b2c23dab4167d01b80bfac28e3d3eecd Mon Sep 17 00:00:00 2001 From: Candas1 Date: Fri, 26 Feb 2021 09:39:31 +0100 Subject: [PATCH] Updated Battery (markdown) --- Battery.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Battery.md b/Battery.md index ee6d8b8..37c2a82 100644 --- a/Battery.md +++ b/Battery.md @@ -18,7 +18,7 @@ You can adjust the levels to your needs in config.h. ## Calibration: Battery voltage has to be calibrated to have a more accurate reading, for this you need [Debug Serial](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Debug-Serial) to be active * Measure battery voltage with a multimeter and write the value * 100 to parameter BAT_CALIB_REAL_VOLTAGE in config.h -* Turn the board on and wait for a few minutes for the Battery ADC to stabilize +* Turn the board on and wait for a minute for the Battery ADC to stabilize * Read value BatAdc or 5 from Debug Serial Output and write it to parameter BAT_CALIB_ADC in config.h * Save, compile and flash the board * Value BatV or 6 in Debug Serial should match with the measured battery voltage now