From d33c6ddd6e7f67dcd5937081d724cfdeb5adb4c7 Mon Sep 17 00:00:00 2001
From: Candas1 <candascraig@hotmail.com>
Date: Tue, 19 Jul 2022 22:20:03 +0200
Subject: [PATCH] Updated Variant SKATEBOARD (markdown)

---
 Variant-SKATEBOARD.md | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Variant-SKATEBOARD.md b/Variant-SKATEBOARD.md
index 246b789..fd4de5f 100644
--- a/Variant-SKATEBOARD.md
+++ b/Variant-SKATEBOARD.md
@@ -7,6 +7,8 @@ CONTROL_PWM_RIGHT is for the right sensor cable and is set by default to limit t
 You can use CONTROL_PWM_LEFT instead if you need to use the left sensor cable.<br>
 DEBUG_SERIAL will be automatically enabled on the opposite cable.<br>
 
+Please also check the [parameters](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Parameters) that are common to all the variants.
+
 ## :electric_plug: Wiring:
 * Connect your receiver VCC to 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!!
 * Connect the receiver signal to green wire on right sensor cable(shorter)