From d99c2151017645c587fe2189f19fa0d0b6dd43b1 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Wed, 20 Apr 2022 11:08:11 +0200 Subject: [PATCH] Updated Variant TRANSPOTTER (markdown) --- Variant-TRANSPOTTER.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Variant-TRANSPOTTER.md b/Variant-TRANSPOTTER.md index 7ab84af..59d8706 100644 --- a/Variant-TRANSPOTTER.md +++ b/Variant-TRANSPOTTER.md @@ -2,7 +2,7 @@ [Transpotter build from Lucy](https://github.com/NiklasFauth/hoverboard-firmware-hack/wiki/Build-Instruction:-TranspOtter) ## Wiring: -* Connect the potentiometer/hall sensor VCC to 3.3v from programming port or from a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!! +* Connect the potentiometer VCC to 3.3v from programming port or from a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!! * Connect the output of the potentiometer to the blue wire (ADC1) for distance and green wire (ADC2) for steering on left sensor board cable * Connect the potentiometer/hall sensor to ground, ⚠️ On some boards, the black wire is 15v !!! Check with a multi-meter to make sure 15V and ground are not swapped * 100k Pull down resistors connected to ground are recommended to prevent issues when inputs are floating (wire is cut or disconnected) triggering ADC protection