From d9f352c59bf50322173773649d22b4a4ec0d28b4 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Sun, 25 Oct 2020 17:38:59 +0100 Subject: [PATCH] Updated ADC Control (markdown) --- ADC-Control.md | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/ADC-Control.md b/ADC-Control.md index e4e76bc..3d3f84d 100644 --- a/ADC-Control.md +++ b/ADC-Control.md @@ -26,10 +26,10 @@ Auto-calibration finds the minimum, middle and maximum values for ADC inputs. * Release potentiometers to the resting position * Press the power button to confirm or wait for the 20 sec timeout -The limits will be stored in flash memory and will be erased only if you fully delete memory before flashing.
+⚠The limits will be stored in flash memory and will be erased only if you fully delete memory before flashing.
An alternative to bypass those limits is to change **FLASH_WRITE_KEY** in config.h to a value different than 0x1234. -⚠ Auto-calibration only works if both ADC inputs are connected/used. +Auto-calibration only works if both ADC inputs are connected/used. # Extra Features @@ -38,6 +38,9 @@ An alternative to bypass those limits is to change **FLASH_WRITE_KEY** in config * move and hold the pots to a desired limit position for Current(ADC1) and Speed(ADC2), maximum being the values you have put in config.h * press the power button to confirm or wait for the 10 sec timeout +⚠The settings will be stored in flash memory and will be erased only if you fully delete memory before flashing.
+An alternative to bypass those settings is to change **FLASH_WRITE_KEY** in config.h to a value different than 0x1234. + ## Support of extra buttons: Uncomment #define **SUPPORT_BUTTONS_RIGHT** to use right sensor board cable for button inputs. Disable DEBUG_SERIAL_USART3! Variables button1 and button2 can be later used to implement different behavior