From ddfa27437439457eab9e792970d54bd8a7006fd8 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Thu, 19 Nov 2020 23:49:28 +0100 Subject: [PATCH] Updated Control PPM (markdown) --- Control---PPM.md | 1 + 1 file changed, 1 insertion(+) diff --git a/Control---PPM.md b/Control---PPM.md index fa35e7c..dac7e0f 100644 --- a/Control---PPM.md +++ b/Control---PPM.md @@ -11,6 +11,7 @@ If the board is beeping * Check the number of channels, even if you transmitter only handles 6 channels, you receiver might transmit more channels * Make sure you enabled PPM on your transmitter * Make sure you are using the sensor cable(left or right) you selected in config.h +* On some board the wire colors might differ, try the blue wire ⚠ Red wire from sensor cable delivers 15v !!! Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator. \ No newline at end of file