From de8e4d9b79a8ded2123ef44c011c634e3afb50bd Mon Sep 17 00:00:00 2001 From: Candas1 Date: Wed, 22 Dec 2021 11:11:43 +0100 Subject: [PATCH] Updated Battery (markdown) --- Battery.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Battery.md b/Battery.md index dd0324f..6d9d40f 100644 --- a/Battery.md +++ b/Battery.md @@ -25,7 +25,7 @@ Battery voltage has to be calibrated to have a more accurate reading, for this y ## Troubleshooting: If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics) * Make sure you have updated the number of cells in [config.h](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/blob/master/Inc/config.h) if you use a battery with less cells in series -* With a battery of low quality/bad health, pulling a lot of current will result in a big battery voltage drop and can lead the board to turn off. You can use a better battery or several batteries in parallel. +* With a battery of low quality/bad health, pulling a lot of current will result in a big battery voltage drop and can lead the board to turn off. You can use a better battery or several batteries in parallel. Adjusting the [battery levels](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery/_edit#battery-level-low-alerts) can help but going too low can be risky for your battery. If the board shuts down and won't restart * The battery BMS will shut the power off if too much current is being drawn