EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-04 01:54:27 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant USART (markdown)

Candas1
2023-02-14 08:29:53 +01:00
parent e59e6ff6a7
commit e083f45b14
1 changed files with 2 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
Variant-USART.md

@@ -67,7 +67,6 @@ The least significant byte comes first (little endian).
If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics)
* Make sure the baud rate is 115200
* Make sure you are using the sensor cable(left=CONTROL_SERIAL_USART2 or right=CONTROL_SERIAL_USART3) selected in config.h
* Assuming RX or/and TX can be defective on your mainboard, you can switch to other sensor cable in config.h
* Assuming RX or/and TX can be defective on your mainboard(port is defective on the MCU, 101 smd resistor is missing or has too high resistance), you can switch to other sensor cable in config.h
* On some boards the wire colors might differ, try switching blue and green wires
* Your Arduino TX/RX might not be working, you can verify that by trying with and FTDI and the Web tool to confirm the mainboard/firmware is not the issue
* The 101 smd resistors on the mainboard for those inputs might be either missing or defect(resistance is too high)