EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 02:24:26 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Battery (markdown)

Candas1
2021-02-26 09:09:56 +01:00
parent 7b75913f22
commit e8865fe94d
1 changed files with 3 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
Battery.md

@@ -16,9 +16,10 @@ Batteries up to 12S have been used safely in the community, but do it at your ow
You can adjust the levels to your needs in config.h. You can adjust the levels to your needs in config.h.
## Calibration: ## Calibration:
Battery voltage has to be calibrated to have a more accurate reading Battery voltage has to be calibrated to have a more accurate reading, for this you need [Debug Serial](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Debug-Serial) to be active
* Measure battery voltage with a multimeter and write the value * 100 to parameter BAT_CALIB_REAL_VOLTAGE in config.h * Measure battery voltage with a multimeter and write the value * 100 to parameter BAT_CALIB_REAL_VOLTAGE in config.h
* Read value BatAdc or 5 from [Debug Serial](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Debug-Serial) and write it to parameter BAT_CALIB_ADC in config.h * Turn the board on and wait for a few minutes for the Battery ADC to stabilize
* Read value BatAdc or 5 from Debug Serial Output and write it to parameter BAT_CALIB_ADC in config.h
* Save, compile and flash the board * Save, compile and flash the board
* Value BatV or 6 in Debug Serial should match with the measured battery voltage now * Value BatV or 6 in Debug Serial should match with the measured battery voltage now