Updated Troubleshooting (markdown)

Candas1
2022-09-27 20:21:53 +02:00
parent b36eb8c81b
commit edcf9adb8b

@@ -1,4 +1,4 @@
The board is not turning on, you can't hear the power stage buzz noise, no melody, the led on the mainboard is off
The board is not turning ON, you can't hear the power stage buzz noise, no melody, the led on the mainboard is OFF
* the top TIP127 mosfet might be defective (Q2 in [schematics](https://github.com/EFeru/hoverboard-firmware-hack-FOC/blob/main/docs/20150722_hoverboard_sch.pdf))
<br>
@@ -29,11 +29,11 @@ You are unable to unlock the chip or flash the firmware
* Check [this](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Compiling-and-flashing-the-firmware) section
<br>
The board turns on/off/on/off.....
The board turns ON/OFF/ON/OFF.....
* Make sure all option bytes are checked in [st-link utility](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/How-to-Unlock-MCU-Flash#troubleshooting)
<br>
The board is turning off
The board is turning OFF
* Check the [Battery troubleshooting section](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery#toolbox-troubleshooting)
<br>
@@ -42,7 +42,7 @@ You hear beeps
* Please also check in the Wiki the troubleshooting section of the variant you are using
<br>
The board turns on, there are no error beeps, wheels are not spinning
The board turns ON, there are no error beeps, wheels are not spinning
* Make sure you did proper [Auto-Calibration](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Input-Calibration#auto-calibration)
<br>