diff --git a/Battery.md b/Battery.md
index 95f4c6b..5e11764 100644
--- a/Battery.md
+++ b/Battery.md
@@ -31,7 +31,8 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac
 * Reducing the [battery low levels](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery/_edit#battery-level-low-alerts) can help but going too low can be risky for your battery
 * You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn to reduce the voltage drop but you will also reduce the power
 
-If the board turns off without the melody, the BMS is shutting the power off:
+If the board turns off without the melody, the BMS is shutting the power off
 * You might be drawing too much current. You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn not to trigger the BMS over-discharge protection but you will reduce the power
 * It can happen if your battery is fully charged and too much current is flowing back (regenerative braking), it can trigger overcharge protection
+
 You will have to unplug the battery and plug it again
\ No newline at end of file