From ee7997a9c395d8a3d310e0be6aaf726cf30a65a3 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Sun, 2 Jan 2022 10:31:12 +0100 Subject: [PATCH] Updated Battery (markdown) --- Battery.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Battery.md b/Battery.md index 95f4c6b..5e11764 100644 --- a/Battery.md +++ b/Battery.md @@ -31,7 +31,8 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac * Reducing the [battery low levels](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery/_edit#battery-level-low-alerts) can help but going too low can be risky for your battery * You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn to reduce the voltage drop but you will also reduce the power -If the board turns off without the melody, the BMS is shutting the power off: +If the board turns off without the melody, the BMS is shutting the power off * You might be drawing too much current. You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn not to trigger the BMS over-discharge protection but you will reduce the power * It can happen if your battery is fully charged and too much current is flowing back (regenerative braking), it can trigger overcharge protection + You will have to unplug the battery and plug it again \ No newline at end of file