From f40928684c0f5650029a584024d0559ae1935214 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Sat, 21 Nov 2020 10:45:17 +0100 Subject: [PATCH] Updated Control IBUS (markdown) --- Control---IBUS.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Control---IBUS.md b/Control---IBUS.md index ab7e063..b7abf7c 100644 --- a/Control---IBUS.md +++ b/Control---IBUS.md @@ -10,7 +10,7 @@ Default number of channels for IBUS in config.h is 14. If the board is beeping * Check the number of channels, even if you transmitter only handles 6 channels, you receiver might transmit more channels * Make sure you enabled PPM on your transmitter -* Make sure you are using the sensor cable(left or right) you selected in config.h +* Make sure you are using the sensor cable(left or right) selected in config.h * On some boards the wire colors might differ, try the blue wire ⚠ Red wire from sensor cable delivers 15v !!!