diff --git a/Wheels.md b/Wheels.md
index f6cc85b..b37a567 100644
--- a/Wheels.md
+++ b/Wheels.md
@@ -1,7 +1,7 @@
 # Hoverboard Wheels
 Hoverboard wheels come in different sizes(4.5",6.5",8",8.5",10"), different printing, with tube or tubeless.<br>
 
-All have been successfully used with this firmware as the wheel share this same characteristics:
+All have been successfully used with this firmware as the wheel share those same characteristics:
 - same motor winding
 - 30 pole pairs
 - Wye/star wiring
@@ -10,9 +10,12 @@ All have been successfully used with this firmware as the wheel share this same
 
 <img src="https://github.com/EFeru/hoverboard-firmware-hack-FOC/blob/master/docs/pictures/motor_winding.png" width="700"><br>
 
-Unfortunately the quality of the wheel might differ, over the years the inner design has been modified to cut down costs:
-- different stator size
-- different number of coil wires(3,4,5) and thickness 
+Unfortunately the quality of the wheel might differ, over the years the inner design has been modified to cut costs down:
+- different stator and magnet size (20mm,25mm,30mm)
+- different number of coil parallel wires(3,4,5) and thickness 
+
+In fact, you can end up with wheels being rated 250W,300W or 350W.<br>
+Depending on your project you might want to check the type of wheels you have, as it can result in less power and more heating.
 
 # Using the firmware with other wheels
 The firmware might work with different type of Motor/Wheels.<br>