From fd3eb11d85380ff384c1afd9cbe48680a4e6f1bc Mon Sep 17 00:00:00 2001 From: Candas1 Date: Mon, 30 Jan 2023 08:15:16 +0100 Subject: [PATCH] Updated Firmware Compatibility (markdown) --- Firmware-Compatibility.md | 1 + 1 file changed, 1 insertion(+) diff --git a/Firmware-Compatibility.md b/Firmware-Compatibility.md index f274329..99a02db 100644 --- a/Firmware-Compatibility.md +++ b/Firmware-Compatibility.md @@ -5,6 +5,7 @@ For the reverse-engineered schematics of the mainboard, see [20150722_hoverboard Some boards have 6 wires on the hall sensors cable, with an additional white wire.
For those you can use the alternate mapping by changing parameter BOARD_VARIANT in [config.h](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/blob/master/Inc/config.h)
+⚠️ The sideboard on the right hand side is powered with battery voltage on those boards⚠️ It could be that your mainboard was designed differently, please check if the pin mapping is matching with the one in this [section](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Firmware-Compatibility#pin-mapping).