Makuna/NeoPixelBus
1
0
Fork 1
mirror of https://github.com/Makuna/NeoPixelBus.git synced 2025-08-07 21:04:27 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated FAQ #2 (markdown)

Michael Miller
2016-03-19 10:16:59 -07:00
parent a4bcf54fbd
commit 6d44ca8049
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
FAQ-#2.md

@@ -4,6 +4,6 @@ The effects you may see, but are not limited to are; the first or last pixels sh
This is due to the IO Pins on the device are 3.3v and the pixels require +-0.5v relative to their power voltage. Most pixels require 5v to run; so this puts the Pin IO out of spec. There are several solutions to this problem.
1) Make sure there isn't a 5v IO Pin on your device. A few lower voltage devices expose a compatible output pin just for this purpose. Switch to that Pin.
2) Use a level shifter in your design. [Adafruit sells one](https://www.adafruit.com/products/1875) that will work and you can find similar modules and circuits that you can incorporate. This will shift the 3.3v IO output to 5v for the pixels.
3) Lower the running voltage to your pixels to within range of the IO pins. Since the pixels need +-0.5v IO, if the primary voltage of the NeoPixel is 3.8v, then the 3.3v of the IO pin are within spec. Some pixels can run just fine at 3.8v and this is often the lowest rated voltage they can run at. The problem with this solution is how do you provide 3.8v at the current requirements the Pixels run at? You will need to get a variable power module and with a good meter set the voltage output to 3.8v. A lot more effort than just getting a level shifter.
3) Lower the running voltage to your pixels to within range of the IO pins. Since the pixels need +-0.5v IO, if the primary voltage of the NeoPixel is 3.8v, then the 3.3v of the IO pin are within spec. Some pixels can run just fine at 3.8v and this is often the lowest rated voltage they can run at. The problem with this solution is how do you provide 3.8v at the current requirements the Pixels run at? You will need to get a variable power module and with a good meter you will need to set the voltage output to 3.8v. A lot more effort than just getting a level shifter.
For this reason I don't suggest this solution except for the bench testing.