From f2a48d6267b53ffd805f3bc33d3477318271d3ce Mon Sep 17 00:00:00 2001
From: Tony DiCola <tony@tonydicola.com>
Date: Mon, 2 Jun 2014 13:41:12 -0700
Subject: [PATCH] Resolve issue #20 by moving delay after 2 second read check
 to make read return quickly.

---
 DHT.cpp                          | 10 ++++++----
 examples/DHTtester/DHTtester.ino |  3 +++
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/DHT.cpp b/DHT.cpp
index a07eeda..fe55016 100644
--- a/DHT.cpp
+++ b/DHT.cpp
@@ -93,10 +93,8 @@ boolean DHT::read(void) {
   uint8_t j = 0, i;
   unsigned long currenttime;
 
-  // pull the pin high and wait 250 milliseconds
-  digitalWrite(_pin, HIGH);
-  delay(250);
-
+  // Check if sensor was read less than two seconds ago and return early
+  // to use last reading.
   currenttime = millis();
   if (currenttime < _lastreadtime) {
     // ie there was a rollover
@@ -115,6 +113,10 @@ boolean DHT::read(void) {
 
   data[0] = data[1] = data[2] = data[3] = data[4] = 0;
   
+  // pull the pin high and wait 250 milliseconds
+  digitalWrite(_pin, HIGH);
+  delay(250);
+
   // now pull it low for ~20 milliseconds
   pinMode(_pin, OUTPUT);
   digitalWrite(_pin, LOW);
diff --git a/examples/DHTtester/DHTtester.ino b/examples/DHTtester/DHTtester.ino
index fc17e87..7af6a0b 100644
--- a/examples/DHTtester/DHTtester.ino
+++ b/examples/DHTtester/DHTtester.ino
@@ -25,6 +25,9 @@ void setup() {
 }
 
 void loop() {
+  // Wait a few seconds between measurements.
+  delay(2000);
+
   // Reading temperature or humidity takes about 250 milliseconds!
   // Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
   float h = dht.readHumidity();