diff --git a/examples/BASIC/BASIC.ino b/examples/BASIC/BASIC.ino
index 09ad1ec..6fd718c 100644
--- a/examples/BASIC/BASIC.ino
+++ b/examples/BASIC/BASIC.ino
@@ -12,10 +12,8 @@ Outdoor Monitor: https://www.airgradient.com/outdoor/
 Build Instructions:
 https://www.airgradient.com/documentation/diy-v4/
 
-Please make sure you have esp8266 board manager installed. Tested with
-version 3.1.2.
-
-Set board to "LOLIN(WEMOS) D1 R2 & mini"
+Compile Instructions:
+https://github.com/airgradienthq/arduino/blob/master/docs/howto-compile.md
 
 Configuration parameters, e.g. Celsius / Fahrenheit or PM unit (US AQI vs ug/m3)
 can be set through the AirGradient dashboard.
diff --git a/examples/DiyProIndoorV3_3/DiyProIndoorV3_3.ino b/examples/DiyProIndoorV3_3/DiyProIndoorV3_3.ino
index 4966926..c80db45 100644
--- a/examples/DiyProIndoorV3_3/DiyProIndoorV3_3.ino
+++ b/examples/DiyProIndoorV3_3/DiyProIndoorV3_3.ino
@@ -12,10 +12,8 @@ Outdoor Monitor: https://www.airgradient.com/outdoor/
 Build Instructions:
 https://www.airgradient.com/documentation/diy-v4/
 
-Please make sure you have esp8266 board manager installed. Tested with
-version 3.1.2.
-
-Set board to "LOLIN(WEMOS) D1 R2 & mini"
+Compile Instructions:
+https://github.com/airgradienthq/arduino/blob/master/docs/howto-compile.md
 
 Configuration parameters, e.g. Celsius / Fahrenheit or PM unit (US AQI vs ug/m3)
 can be set through the AirGradient dashboard.
diff --git a/examples/DiyProIndoorV4_2/DiyProIndoorV4_2.ino b/examples/DiyProIndoorV4_2/DiyProIndoorV4_2.ino
index 0ae3dd2..92912bb 100644
--- a/examples/DiyProIndoorV4_2/DiyProIndoorV4_2.ino
+++ b/examples/DiyProIndoorV4_2/DiyProIndoorV4_2.ino
@@ -12,10 +12,8 @@ Outdoor Monitor: https://www.airgradient.com/outdoor/
 Build Instructions:
 https://www.airgradient.com/documentation/diy-v4/
 
-Please make sure you have esp8266 board manager installed. Tested with
-version 3.1.2.
-
-Set board to "LOLIN(WEMOS) D1 R2 & mini"
+Compile Instructions:
+https://github.com/airgradienthq/arduino/blob/master/docs/howto-compile.md
 
 Configuration parameters, e.g. Celsius / Fahrenheit or PM unit (US AQI vs ug/m3)
 can be set through the AirGradient dashboard.
diff --git a/examples/OneOpenAir/OneOpenAir.ino b/examples/OneOpenAir/OneOpenAir.ino
index 3202f12..7580bdf 100644
--- a/examples/OneOpenAir/OneOpenAir.ino
+++ b/examples/OneOpenAir/OneOpenAir.ino
@@ -14,17 +14,8 @@ https://www.airgradient.com/documentation/one-v9/ Build Instructions:
 AirGradient Open Air:
 https://www.airgradient.com/documentation/open-air-pst-kit-1-3/
 
-Please make sure you have esp32 board manager installed. Tested with
-version 2.0.11.
-
-Important flashing settings:
-- Set board to "ESP32C3 Dev Module"
-- Enable "USB CDC On Boot"
-- Flash frequency "80Mhz"
-- Flash mode "QIO"
-- Flash size "4MB"
-- Partition scheme "Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)"
-- JTAG adapter "Disabled"
+Compile Instructions:
+https://github.com/airgradienthq/arduino/blob/master/docs/howto-compile.md
 
 Configuration parameters, e.g. Celsius / Fahrenheit or PM unit (US AQI vs ug/m3)
 can be set through the AirGradient dashboard.