airgradienthq/arduino
1
0
Fork 1
mirror of https://github.com/airgradienthq/arduino.git synced 2025-07-29 08:27:17 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated indoor examples

Browse Source
This commit is contained in:
Achim
2023-04-13 09:33:26 +07:00
parent 43f599a0a7
commit 6314e52770
4 changed files with 61 additions and 68 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
examples/DIY_BASIC/DIY_BASIC.ino
View File

@ -85,9 +85,7 @@ void setup()
if (connectWIFI) {
connectToWifi();
}
updateOLED2("Warming", "up the", "sensors");
updateOLED2("Warm Up", "Serial#", String(ESP.getChipId(), HEX));
ag.CO2_Init();
ag.PMS_Init();
ag.TMP_RH_Init(0x44);
@ -207,9 +205,9 @@ void sendToServer() {
WiFiManager wifiManager;
//WiFi.disconnect(); //to delete previous saved hotspot
String HOTSPOT = "AG-" + String(ESP.getChipId(), HEX);
updateOLED2("Connect", "Wifi", HOTSPOT);
updateOLED2("Connect", "Wifi AG-", String(ESP.getChipId(), HEX));
delay(2000);
wifiManager.setTimeout(60);
wifiManager.setTimeout(90);
if (!wifiManager.autoConnect((const char * ) HOTSPOT.c_str())) {
updateOLED2("Booting", "offline", "mode");
Serial.println("failed to connect and hit timeout");

36
examples/DIY_PRO_V3_7/DIY_PRO_V3_7.ino
View File

@ -52,14 +52,14 @@ NOxGasIndexAlgorithm nox_algorithm;
uint16_t conditioning_s = 10;
// for peristent saving and loading
int addr = 0;
int addr = 4;
byte value;
// Display bottom right
//U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
// Replace above if you have display on top left
U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R2, /* reset=*/ U8X8_PIN_NONE);
//U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R2, /* reset=*/ U8X8_PIN_NONE);
// CONFIGURATION START
@ -108,7 +108,7 @@ unsigned long previousTempHum = 0;
float temp = 0;
int hum = 0;
int buttonConfig=0;
int buttonConfig=4;
int lastState = LOW;
int currentState;
unsigned long pressedTime = 0;
@ -143,7 +143,7 @@ void setup() {
connectToWifi();
}
updateOLED2("Warming up the", "sensors.", "");
updateOLED2("Warming Up", "Serial Number:", String(ESP.getChipId(), HEX));
sgp41.begin(Wire);
ag.CO2_Init();
ag.PMS_Init();
@ -232,25 +232,25 @@ void setConfig() {
inUSAQI = true;
}
if (buttonConfig == 4) {
updateOLED2("Temp. in C", "PM in ug/m3", "Display Top");
updateOLED2("Temp. in C", "PM in ug/m3", "Display Bottom");
u8g2.setDisplayRotation(U8G2_R0);
inF = false;
inUSAQI = false;
}
if (buttonConfig == 5) {
updateOLED2("Temp. in C", "PM in US AQI", "Display Top");
updateOLED2("Temp. in C", "PM in US AQI", "Display Bottom");
u8g2.setDisplayRotation(U8G2_R0);
inF = false;
inUSAQI = true;
}
if (buttonConfig == 6) {
updateOLED2("Temp. in F", "PM in ug/m3", "Display Top");
updateOLED2("Temp. in F", "PM in ug/m3", "Display Bottom");
u8g2.setDisplayRotation(U8G2_R0);
inF = true;
inUSAQI = false;
}
if (buttonConfig == 7) {
updateOLED2("Temp. in F", "PM in US AQI", "Display Top");
updateOLED2("Temp. in F", "PM in US AQI", "Display Bottom");
u8g2.setDisplayRotation(U8G2_R0);
inF = true;
inUSAQI = true;
@ -400,19 +400,8 @@ void sendToServer() {
WiFiManager wifiManager;
//WiFi.disconnect(); //to delete previous saved hotspot
String HOTSPOT = "AG-" + String(ESP.getChipId(), HEX);
updateOLED2("60s to connect", "to Wifi Hotspot", HOTSPOT);
wifiManager.setTimeout(60);
WiFiManagerParameter custom_text("<p>This is just a text paragraph</p>");
wifiManager.addParameter(&custom_text);
WiFiManagerParameter parameter("parameterId", "Parameter Label", "default value", 40);
wifiManager.addParameter(&parameter);
Serial.println("Parameter 1:");
Serial.println(parameter.getValue());
updateOLED2("90s to connect", "to Wifi Hotspot", HOTSPOT);
wifiManager.setTimeout(90);
if (!wifiManager.autoConnect((const char * ) HOTSPOT.c_str())) {
updateOLED2("booting into", "offline mode", "");
@ -420,9 +409,6 @@ void sendToServer() {
delay(6000);
}
Serial.println("Parameter 2:");
Serial.println(parameter.getValue());
}
// Calculate PM2.5 US AQI

83
examples/DIY_PRO_V4_2/DIY_PRO_V4_2.ino
View File

@ -1,11 +1,11 @@
/*
Important: This code is only for the DIY PRO PCB Version 4.2 that needs different code due to different wiring of the push button.
Important: This code is only for the DIY PRO PCB Version 3.7 that has a push button mounted.
This is the code for the AirGradient DIY PRO Air Quality Sensor with an ESP8266 Microcontroller with the SGP40 TVOC module from AirGradient.
It is a high quality sensor showing PM2.5, CO2, Temperature and Humidity on a small display and can send data over Wifi.
Build Instructions: https://www.airgradient.com/open-airgradient/instructions/diy-pro-v42/
Build Instructions: https://www.airgradient.com/open-airgradient/instructions/diy-pro-v37/
Kits (including a pre-soldered version) are available: https://www.airgradient.com/open-airgradient/kits/
@ -23,7 +23,7 @@ If you have any questions please visit our forum at https://forum.airgradient.co
If you are a school or university contact us for a free trial on the AirGradient platform.
https://www.airgradient.com/
License: CC BY-NC 4.0 Attribution-NonCommercial 4.0 International
CC BY-SA 4.0 Attribution-ShareAlike 4.0 International License
*/
@ -51,8 +51,8 @@ NOxGasIndexAlgorithm nox_algorithm;
// time in seconds needed for NOx conditioning
uint16_t conditioning_s = 10;
// for persistent saving and loading
int addr = 0;
// for peristent saving and loading
int addr = 4;
byte value;
// Display bottom right
@ -108,8 +108,8 @@ unsigned long previousTempHum = 0;
float temp = 0;
int hum = 0;
int buttonConfig=0;
int lastState = HIGH;
int buttonConfig=4;
int lastState = LOW;
int currentState;
unsigned long pressedTime = 0;
unsigned long releasedTime = 0;
@ -117,7 +117,6 @@ unsigned long releasedTime = 0;
void setup() {
Serial.begin(115200);
Serial.println("Hello");
u8g2.setBusClock(100000);
u8g2.begin();
//u8g2.setDisplayRotation(U8G2_R0);
@ -130,14 +129,12 @@ void setup() {
updateOLED2("Press Button", "Now for", "Config Menu");
delay(2000);
pinMode(D7, INPUT_PULLUP);
currentState = digitalRead(D7);
if (currentState == LOW)
if (currentState == HIGH)
{
updateOLED2("Entering", "Config Menu", "");
delay(3000);
lastState = HIGH;
lastState = LOW;
inConf();
}
@ -146,7 +143,7 @@ void setup() {
connectToWifi();
}
updateOLED2("Warming up the", "sensors.", "");
updateOLED2("Warming Up", "Serial Number:", String(ESP.getChipId(), HEX));
sgp41.begin(Wire);
ag.CO2_Init();
ag.PMS_Init();
@ -154,9 +151,6 @@ void setup() {
}
void loop() {
currentState = digitalRead(D7);
currentMillis = millis();
updateTVOC();
updateOLED();
@ -170,27 +164,20 @@ void inConf(){
setConfig();
currentState = digitalRead(D7);
if (currentState){
Serial.println("currentState: high");
} else {
Serial.println("currentState: low");
}
if(lastState == HIGH && currentState == LOW) {
if(lastState == LOW && currentState == HIGH) {
pressedTime = millis();
}
else if(lastState == LOW && currentState == HIGH) {
else if(lastState == HIGH && currentState == LOW) {
releasedTime = millis();
long pressDuration = releasedTime - pressedTime;
if( pressDuration < 1000 ) {
buttonConfig=buttonConfig+1;
if (buttonConfig>3) buttonConfig=0;
if (buttonConfig>7) buttonConfig=0;
}
}
if (lastState == LOW && currentState == LOW){
if (lastState == HIGH && currentState == HIGH){
long passedDuration = millis() - pressedTime;
if( passedDuration > 4000 ) {
// to do
@ -221,30 +208,52 @@ void inConf(){
void setConfig() {
if (buttonConfig == 0) {
updateOLED2("Temp. in C", "PM in ug/m3", "Long Press Saves");
u8g2.setDisplayRotation(U8G2_R0);
updateOLED2("Temp. in C", "PM in ug/m3", "Display Top");
u8g2.setDisplayRotation(U8G2_R2);
inF = false;
inUSAQI = false;
} else if (buttonConfig == 1) {
updateOLED2("Temp. in C", "PM in US AQI", "Long Press Saves");
u8g2.setDisplayRotation(U8G2_R0);
updateOLED2("Temp. in C", "PM in US AQI", "Display Top");
u8g2.setDisplayRotation(U8G2_R2);
inF = false;
inUSAQI = true;
} else if (buttonConfig == 2) {
updateOLED2("Temp. in F", "PM in ug/m3", "Long Press Saves");
u8g2.setDisplayRotation(U8G2_R0);
updateOLED2("Temp. in F", "PM in ug/m3", "Display Top");
u8g2.setDisplayRotation(U8G2_R2);
inF = true;
inUSAQI = false;
} else if (buttonConfig == 3) {
updateOLED2("Temp. in F", "PM in US AQI", "Long Press Saves");
updateOLED2("Temp. in F", "PM in US AQI", "Display Top");
u8g2.setDisplayRotation(U8G2_R2);
inF = true;
inUSAQI = true;
} else if (buttonConfig == 4) {
updateOLED2("Temp. in C", "PM in ug/m3", "Display Bottom");
u8g2.setDisplayRotation(U8G2_R0);
inF = false;
inUSAQI = false;
}
if (buttonConfig == 5) {
updateOLED2("Temp. in C", "PM in US AQI", "Display Bottom");
u8g2.setDisplayRotation(U8G2_R0);
inF = false;
inUSAQI = true;
} else if (buttonConfig == 6) {
updateOLED2("Temp. in F", "PM in ug/m3", "Display Bottom");
u8g2.setDisplayRotation(U8G2_R0);
inF = true;
inUSAQI = false;
} else if (buttonConfig == 7) {
updateOLED2("Temp. in F", "PM in US AQI", "Display Bottom");
u8g2.setDisplayRotation(U8G2_R0);
inF = true;
inUSAQI = true;
} else {
updateOLED2("Short Press", "Button for", "Options");
}
// to do
// if (buttonConfig == 4) {
// if (buttonConfig == 8) {
// updateOLED2("CO2", "Manual", "Calibration");
// }
}

2
library.properties
View File

@ -1,5 +1,5 @@
name=AirGradient Air Quality Sensor
version=2.4.0
version=2.4.1
author=AirGradient <support@airgradient.com>
maintainer=AirGradient <support@airgradient.com>
sentence=ESP8266 library for an air quality sensor featuring PM2.5, CO2, Temperature, TVOC and Humidity with OLED display.