Fix capitalize folder and file name ignored

src/PMS/PMS5003T.cpp

@@ -0,0 +1,236 @@
+#include "PMS5003T.h"
+#include "Arduino.h"
+
+#if defined(ESP8266)
+#include <SoftwareSerial.h>
+/**
+ * @brief Init sensor
+ *
+ * @param _debugStream Serial use for print debug log
+ * @return true Success
+ * @return false Failure
+ */
+bool PMS5003T::begin(Stream *_debugStream) {
+  this->_debugStream = _debugStream;
+  return this->begin();
+}
+#else
+
+/**
+ * @brief Init Sensor
+ *
+ * @param serial Serial communication with sensor
+ * @return true Success
+ * @return false Failure
+ */
+bool PMS5003T::begin(HardwareSerial &serial) {
+  this->_serial = &serial;
+  return this->begin();
+}
+#endif
+
+/**
+ * @brief Construct a new PMS5003T::PMS5003T object
+ *
+ * @param def Board type @ref BoardType
+ */
+PMS5003T::PMS5003T(BoardType def) : _boardDef(def) {}
+
+/**
+ * @brief Init sensor
+ *
+ * @return true Success
+ * @return false Failure
+ */
+bool PMS5003T::begin(void) {
+  if (this->_isBegin) {
+    return true;
+  }
+
+#if defined(ESP32)
+  // if (this->_serial != &Serial) {
+  //   AgLog("Hardware serial must be Serial(0)");
+  //   return false;
+  // }
+#endif
+
+  this->bsp = getBoardDef(this->_boardDef);
+  if (bsp == NULL) {
+    AgLog("Board [%d] not supported", this->_boardDef);
+    return false;
+  }
+
+  if (bsp->Pms5003.supported == false) {
+    AgLog("Board [%d] PMS5003 not supported", this->_boardDef);
+    return false;
+  }
+
+#if defined(ESP8266)
+  bsp->Pms5003.uart_tx_pin;
+  SoftwareSerial *uart =
+      new SoftwareSerial(bsp->Pms5003.uart_tx_pin, bsp->Pms5003.uart_rx_pin);
+  uart->begin(9600);
+  if (pms.begin(uart) == false) {
+    AgLog("PMS failed");
+    return false;
+  }
+#else
+
+#if ARDUINO_USB_CDC_ON_BOOT // Serial used for USB CDC
+  if (this->_serial == &Serial0) {
+#else
+  if (this->_serial == &Serial) {
+#endif
+    AgLog("Init Serial");
+    this->_serial->begin(9600, SERIAL_8N1, bsp->Pms5003.uart_rx_pin,
+                         bsp->Pms5003.uart_tx_pin);
+  } else {
+    if (bsp->SenseAirS8.supported == false) {
+      AgLog("Board [%d] PMS5003T_2 not supported", this->_boardDef);
+      return false;
+    }
+
+    /** Share with sensor air s8*/
+    AgLog("Init Serialx");
+    this->_serial->begin(9600, SERIAL_8N1, bsp->SenseAirS8.uart_rx_pin,
+                         bsp->SenseAirS8.uart_tx_pin);
+  }
+  if (pms.begin(this->_serial) == false) {
+    AgLog("PMS failed");
+    return false;
+  }
+#endif
+
+  this->_isBegin = true;
+  return true;
+}
+
+/**
+ * @brief Convert PM2.5 to US AQI
+ *
+ * @param pm02
+ * @return int
+ */
+int PMS5003T::pm25ToAQI(int pm02) {
+  if (pm02 <= 12.0)
+    return ((50 - 0) / (12.0 - .0) * (pm02 - .0) + 0);
+  else if (pm02 <= 35.4)
+    return ((100 - 50) / (35.4 - 12.0) * (pm02 - 12.0) + 50);
+  else if (pm02 <= 55.4)
+    return ((150 - 100) / (55.4 - 35.4) * (pm02 - 35.4) + 100);
+  else if (pm02 <= 150.4)
+    return ((200 - 150) / (150.4 - 55.4) * (pm02 - 55.4) + 150);
+  else if (pm02 <= 250.4)
+    return ((300 - 200) / (250.4 - 150.4) * (pm02 - 150.4) + 200);
+  else if (pm02 <= 350.4)
+    return ((400 - 300) / (350.4 - 250.4) * (pm02 - 250.4) + 300);
+  else if (pm02 <= 500.4)
+    return ((500 - 400) / (500.4 - 350.4) * (pm02 - 350.4) + 400);
+  else
+    return 500;
+}
+
+/**
+ * @brief Read all package data then call to @ref getPMxxx to get the target
+ * data
+ *
+ * @return true Success
+ * @return false Failure
+ */
+bool PMS5003T::readData(void) {
+  if (this->isBegin() == false) {
+    return false;
+  }
+
+  return pms.readUntil(pmsData);
+}
+
+/**
+ * @brief Read PM1.0 must call this function after @ref readData success
+ *
+ * @return int PM1.0 index
+ */
+int PMS5003T::getPm01Ae(void) { return pmsData.PM_AE_UG_1_0; }
+
+/**
+ * @brief Read PM2.5 must call this function after @ref readData success
+ *
+ * @return int PM2.5 index
+ */
+int PMS5003T::getPm25Ae(void) { return pmsData.PM_AE_UG_2_5; }
+
+/**
+ * @brief Read PM10.0 must call this function after @ref readData success
+ *
+ * @return int PM10.0 index
+ */
+int PMS5003T::getPm10Ae(void) { return pmsData.PM_AE_UG_10_0; }
+
+/**
+ * @brief Read PM3.0 must call this function after @ref readData success
+ *
+ * @return int PM3.0 index
+ */
+int PMS5003T::getPm03ParticleCount(void) { return pmsData.PM_RAW_0_3; }
+
+/**
+ * @brief Convert PM2.5 to US AQI
+ *
+ * @param pm25 PM2.5 index
+ * @return int PM2.5 US AQI
+ */
+int PMS5003T::convertPm25ToUsAqi(int pm25) { return this->pm25ToAQI(pm25); }
+
+/**
+ * @brief Get temperature, Must call this method after @ref readData() success
+ *
+ * @return float Degree Celcius
+ */
+float PMS5003T::getTemperature(void) {
+  float temp = pmsData.AMB_TMP;
+  return correctionTemperature(temp / 10.0f);
+}
+
+/**
+ * @brief Get humidity, Must call this method after  @ref readData() success
+ *
+ * @return float Percent (%)
+ */
+float PMS5003T::getRelativeHumidity(void) {
+  float temp = pmsData.AMB_HUM;
+  return temp / 10.0f;
+}
+
+/**
+ * @brief Check device initialized or not
+ *
+ * @return true Initialized
+ * @return false No-initialized
+ */
+bool PMS5003T::isBegin(void) {
+  if (this->_isBegin == false) {
+    AgLog("Not-initialized");
+    return false;
+  }
+  return true;
+}
+
+float PMS5003T::correctionTemperature(float inTemp) {
+  if (inTemp < 10.0f) {
+    return inTemp * 1.327f - 6.738f;
+  }
+  return inTemp * 1.181f - 5.113f;
+}
+
+void PMS5003T::end(void) {
+  if (_isBegin == false) {
+    return;
+  }
+  _isBegin = false;
+#if defined(ESP8266)
+  _debugStream = NULL;
+#else
+  delete _serial;
+#endif
+  AgLog("De-initialize");
+}