airgradienthq/arduino
1
0
Fork 1
mirror of https://github.com/airgradienthq/arduino.git synced 2025-07-29 08:27:17 +02:00
Code Issues Packages Projects Releases Wiki Activity

Improved formatting

Browse Source
This commit is contained in:
Achim
2022-11-03 13:51:29 +07:00
parent afd4d16866
commit 724d041684
1 changed files with 1 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
examples/C02_CALIBRATION/C02_CALIBRATION.ino
View File

@ -1,9 +1,4 @@
/****************************** /*
******************************/
/*
This is the code for forced calibration of the SenseAir S8 sensor. The sensor also has a one-week automatic baseline calibration that should calibrate the sensor latest after one week.0 This is the code for forced calibration of the SenseAir S8 sensor. The sensor also has a one-week automatic baseline calibration that should calibrate the sensor latest after one week.0
However if you need a faster calibration please proceed as following: However if you need a faster calibration please proceed as following:
@ -44,7 +39,6 @@ U8G2_SSD1306_64X48_ER_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); //for D
/* END CONFIGURATION */ /* END CONFIGURATION */
#ifdef USE_SOFTWARE_SERIAL #ifdef USE_SOFTWARE_SERIAL
SoftwareSerial S8_serial(S8_RX_PIN, S8_TX_PIN); SoftwareSerial S8_serial(S8_RX_PIN, S8_TX_PIN);
#else #else
@ -63,10 +57,7 @@ S8_sensor sensor;
void setup() { void setup() {
Serial.begin(DEBUG_BAUDRATE); Serial.begin(DEBUG_BAUDRATE);
u8g2.begin(); u8g2.begin();
int i = 0; int i = 0;
while (!Serial && i < 50) { while (!Serial && i < 50) {
delay(10); delay(10);
@ -85,7 +76,6 @@ void setup() {
printf("Firmware version: %s\n", sensor.firm_version); printf("Firmware version: %s\n", sensor.firm_version);
sensor.sensor_id = sensor_S8->get_sensor_ID(); sensor.sensor_id = sensor_S8->get_sensor_ID();
Serial.print("Sensor ID: 0x"); printIntToHex(sensor.sensor_id, 4); Serial.println(""); Serial.print("Sensor ID: 0x"); printIntToHex(sensor.sensor_id, 4); Serial.println("");
Serial.println("Now, you put the sensor outside and wait."); Serial.println("Now, you put the sensor outside and wait.");
Serial.println("Countdown begins..."); Serial.println("Countdown begins...");
unsigned int seconds = COUNTDOWN; unsigned int seconds = COUNTDOWN;
@ -96,7 +86,6 @@ void setup() {
seconds--; seconds--;
} }
Serial.println("Time reamining: 0 minutes 0 seconds"); Serial.println("Time reamining: 0 minutes 0 seconds");
// Start manual calibration // Start manual calibration
Serial.println("Starting manual calibration..."); Serial.println("Starting manual calibration...");
updateOLED2("Starting", "Manual", "Calibration"); updateOLED2("Starting", "Manual", "Calibration");
@ -108,7 +97,6 @@ void setup() {
} }
} }
void loop() { void loop() {
static unsigned int elapsed = 0; static unsigned int elapsed = 0;
delay(2000); delay(2000);
@ -126,7 +114,6 @@ void loop() {
} }
} }
void updateOLED2(String ln1, String ln2, String ln3) { void updateOLED2(String ln1, String ln2, String ln3) {
char buf[9]; char buf[9];
u8g2.firstPage(); u8g2.firstPage();