airgradienthq/arduino
1
0
Fork 1
mirror of https://github.com/airgradienthq/arduino.git synced 2025-07-29 00:17:16 +02:00
Code Issues Packages Projects Releases Wiki Activity

added 90 degree rotation code

Browse Source
This commit is contained in:
achim
2022-07-29 11:11:39 +02:00
parent 4bb434562f
commit b9a968ef7a
4 changed files with 62 additions and 241 deletions
Download Patch File Download Diff File Expand all files Collapse all files

70
examples/DIY_PRO/DIY_PRO.ino
View File

@ -1,13 +1,11 @@
/*
This is the code for the AirGradient DIY Air Quality Sensor with an ESP8266 Microcontroller.
This is the code for the AirGradient DIY PRO Air Quality Sensor with an ESP8266 Microcontroller.
It is a high quality sensor showing PM2.5, CO2, Temperature and Humidity on a small display and can send data over Wifi.
For build instructions please visit https://www.airgradient.com/diy/
Build Instructions: https://www.airgradient.com/open-airgradient/instructions/diy-pro/
Instructions on using the TVOC sensor (SGP30) instead of the Temperature / Humidity sensor (SHT3x).
https://www.airgradient.com/resources/tvoc-on-airgradient-diy-sensor/
Kits (including a pre-soldered version) are available: https://www.airgradient.com/open-airgradient/kits/
The codes needs the following libraries installed:
“WifiManager by tzapu, tablatronix” tested with version 2.0.11-beta
@ -15,7 +13,7 @@ The codes needs the following libraries installed:
“SGP30” by Rob Tilaart tested with Version 0.1.5
Configuration:
Please set in the code below which sensor you are using and if you want to connect it to WiFi.
Please set in the code below the configuration parameters.
If you have any questions please visit our forum at https://forum.airgradient.com/
@ -38,8 +36,28 @@ MIT License
AirGradient ag = AirGradient();
SGP30 SGP;
// Display bottom right
U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
// Replace above if you have display on top left
//U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R3, /* reset=*/ U8X8_PIN_NONE);
// CONFIGURATION START
//set to the endpoint you would like to use
String APIROOT = "http://hw.airgradient.com/";
// set to true to switch from Celcius to Fahrenheit
boolean inF = false;
// set to true if you want to connect to wifi. You have 60 seconds to connect. Then it will go into an offline mode.
boolean connectWIFI=true;
// CONFIGURATION END
unsigned long currentMillis = 0;
const int oledInterval = 5000;
@ -65,18 +83,6 @@ unsigned long previousTempHum = 0;
float temp = 0;
int hum = 0;
String APIROOT = "http://hw.airgradient.com/";
// set to true to switch PM2.5 from ug/m3 to US AQI
boolean inUSaqi = true;
// set to true to switch from Celcius to Fahrenheit
boolean inF = true;
// set to true if you want to connect to wifi. The display will show values only when the sensor has wifi connection
boolean connectWIFI=true;
void setup()
{
Serial.begin(115200);
@ -152,28 +158,23 @@ void updateTempHum()
void updateOLED() {
if (currentMillis - previousOled >= oledInterval) {
previousOled += oledInterval;
String ln1;
String ln2;
if (inUSaqi) {
ln1 = "CO2:" + String(Co2) + " AQI:" + String(PM_TO_AQI_US(pm25));
} else {
ln1 = "CO2:" + String(Co2) + " PM:" + String(pm25);
}
String ln3;
String ln1 = "PM:" + String(pm25) + " CO2:" + String(Co2);
String ln2 = "AQI:" + String(PM_TO_AQI_US(pm25)) + " TVOC:" + String(TVOC);
if (inF) {
ln2 = "F:" + String((temp* 9 / 5) + 32) + " H:" + String(hum)+"%";
ln3 = "F:" + String((temp* 9 / 5) + 32) + " H:" + String(hum)+"%";
} else {
ln2 = "C:" + String(temp) + " H:" + String(hum)+"%";
ln3 = "C:" + String(temp) + " H:" + String(hum)+"%";
}
String ln3 = "TVOC:" + String(TVOC) ;
updateOLED2(ln1, ln2, ln3);
}
}
void updateOLED2(String ln1, String ln2, String ln3) {
char buf[9];
u8g2.firstPage();
u8g2.firstPage();
u8g2.firstPage();
do {
u8g2.setFont(u8g2_font_t0_16_tf);
@ -219,13 +220,12 @@ void sendToServer() {
WiFiManager wifiManager;
//WiFi.disconnect(); //to delete previous saved hotspot
String HOTSPOT = "AG-" + String(ESP.getChipId(), HEX);
updateOLED2("To setup connect", "to Wifi Hotspot", HOTSPOT);
wifiManager.setTimeout(120);
updateOLED2("60s to connect", "to Wifi Hotspot", HOTSPOT);
wifiManager.setTimeout(60);
if (!wifiManager.autoConnect((const char * ) HOTSPOT.c_str())) {
updateOLED2("booting into", "offline mode", "");
Serial.println("failed to connect and hit timeout");
delay(3000);
ESP.restart();
delay(5000);
delay(6000);
}
}