airgradienthq/arduino
1
0
Fork 1
mirror of https://github.com/airgradienthq/arduino.git synced 2025-07-27 23:47:16 +02:00
Code Issues Packages Projects Releases Wiki Activity

set active mode on init

Browse Source
This commit is contained in:
Phat Nguyen
2024-09-24 10:39:17 +07:00
parent 2e0ba26c97
commit ebb3f01dcd
1 changed files with 19 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
src/PMS/PMS.cpp
View File

@ -4,7 +4,7 @@
/**
* @brief Initializes the sensor and attempts to read data.
*
* @param stream UART stream
* @param HardwareSerial UART stream
* @return true Sucecss
* @return false Failure
*/
@ -13,7 +13,19 @@ bool PMSBase::begin(HardwareSerial &serial) {
_connected = false;
// Run and check sensor data for 4sec
int bytesCleared = serial.available();
serial.flush();
if (bytesCleared) {
Serial.printf("cleared %d byte(s)\n", bytesCleared);
}
// explicitly put the sensor into active mode, this seems to be be needed for
// the Cubic PM2009X
Serial.printf("Setting active mode\n");
uint8_t activeModeCommand[] = {0x42, 0x4D, 0xE1, 0x00, 0x01, 0x01, 0x71};
size_t bytesWritten =
serial.write(activeModeCommand, sizeof(activeModeCommand));
Serial.printf("%d byte(s) written\n", bytesWritten);
unsigned long lastInit = millis();
while (true) {
@ -25,9 +37,15 @@ bool PMSBase::begin(HardwareSerial &serial) {
delay(1);
unsigned long ms = (unsigned long)(millis() - lastInit);
if (ms >= 4000) {
Serial.println("Initialize PMS sensor: Timeout");
break;
}
}
if (_connected) {
Serial.println("Initialize PMS sensor");
}
return _connected;
}