Merge pull request #156 from airgradienthq/develop

Develop

examples/BASIC/BASIC.ino

@@ -224,7 +224,7 @@ static void failedHandler(String msg) {
 static void executeCo2Calibration(void) {
   /** Count down for co2CalibCountdown secs */
   for (int i = 0; i < SENSOR_CO2_CALIB_COUNTDOWN_MAX; i++) {
-    displayShowText("CO2 calib", "after",
+    displayShowText("CO2 calib.", "after",
                     String(SENSOR_CO2_CALIB_COUNTDOWN_MAX - i) + " sec");
     delay(1000);
   }
@@ -232,16 +232,16 @@ static void executeCo2Calibration(void) {
   if (ag.s8.setBaselineCalibration()) {
     displayShowText("Calib", "success", "");
     delay(1000);
-    displayShowText("Wait for", "finish", "...");
+    displayShowText("Wait to", "complete", "...");
     int count = 0;
     while (ag.s8.isBaseLineCalibrationDone() == false) {
       delay(1000);
       count++;
     }
-    displayShowText("Finish", "after", String(count) + " sec");
+    displayShowText("Finished", "after", String(count) + " sec");
     delay(DISPLAY_DELAY_SHOW_CONTENT_MS);
   } else {
-    displayShowText("Calib", "failure!!!", "");
+    displayShowText("Calibration", "failure", "");
     delay(DISPLAY_DELAY_SHOW_CONTENT_MS);
   }
 }

examples/OneOpenAir/OneOpenAir.ino

@@ -152,8 +152,6 @@ void setup() {
   }
   Serial.println("Detected " + ag->getBoardName());
 
-  /** Init sensor */
-  boardInit();
   configuration.setAirGradient(ag);
   oledDisplay.setAirGradient(ag);
   stateMachine.setAirGradient(ag);
@@ -162,11 +160,13 @@ void setup() {
   openMetrics.setAirGradient(ag);
   localServer.setAirGraident(ag);
 
+  /** Init sensor */
+  boardInit();
+
   /** Connecting wifi */
   bool connectToWifi = false;
   if (ag->isOne()) {
     if (ledBarButtonTest) {
-      stateMachine.executeLedBarPowerUpTest();
       if (ag->button.getState() == PushButton::BUTTON_PRESSED) {
         WiFi.begin("airgradient", "cleanair");
         Serial.println("WiFi Credential reset to factory defaults");
@@ -219,15 +219,20 @@ void setup() {
         #ifdef ESP8266
           // ota not supported
         #else
-          // otaHandler.updateFirmwareIfOutdated(ag->deviceId());
+          otaHandler.updateFirmwareIfOutdated(ag->deviceId());
+
+          /** Update first OTA */
+          measurements.otaBootCount = 0;
         #endif
 
         apiClient.fetchServerConfiguration();
         configSchedule.update();
         if (apiClient.isFetchConfigureFailed()) {
           if (ag->isOne()) {
-            stateMachine.displayHandle(
-                AgStateMachineWiFiOkServerOkSensorConfigFailed);
+            if (apiClient.isNotAvailableOnDashboard()) {
+              stateMachine.displayHandle(
+                  AgStateMachineWiFiOkServerOkSensorConfigFailed);
+            }
           }
           stateMachine.handleLeds(
               AgStateMachineWiFiOkServerOkSensorConfigFailed);
@@ -235,6 +240,9 @@ void setup() {
         } else {
           ledBarEnabledUpdate();
         }
+      } else {
+        oledDisplay.showRebooting();
+        delay(2500);
       }
     }
   }
@@ -459,9 +467,10 @@ static void ledBarEnabledUpdate(void) {
     if ((brightness == 0) || (configuration.getLedBarMode() == LedBarModeOff)) {
       ag->ledBar.setEnable(false);
     } else {
-      ag->ledBar.setBrighness(brightness);
+      ag->ledBar.setBrightness(brightness);
       ag->ledBar.setEnable(configuration.getLedBarMode() != LedBarModeOff);
     }
+     ag->ledBar.show();
   }
 }
 
@@ -615,6 +624,23 @@ static void oneIndoorInit(void) {
   ag->button.begin();
   ag->watchdog.begin();
 
+  /** Run LED test on start up if button pressed */
+  oledDisplay.setText("Press now for", "LED test", "");
+  ledBarButtonTest = false;
+  uint32_t stime = millis();
+  while (true) {
+    if (ag->button.getState() == ag->button.BUTTON_PRESSED) {
+      ledBarButtonTest = true;
+      stateMachine.executeLedBarPowerUpTest();
+      break;
+    }
+    delay(1);
+    uint32_t ms = (uint32_t)(millis() - stime);
+    if (ms >= 3000) {
+      break;
+    }
+  }
+
   /** Init sensor SGP41 */
   if (sgp41Init() == false) {
     dispSensorNotFound("SGP41");
@@ -641,22 +667,6 @@ static void oneIndoorInit(void) {
 
     dispSensorNotFound("PMS");
   }
-
-  /** Run LED test on start up */
-  oledDisplay.setText("Press now for", "LED test", "");
-  ledBarButtonTest = false;
-  uint32_t stime = millis();
-  while (true) {
-    if (ag->button.getState() == ag->button.BUTTON_PRESSED) {
-      ledBarButtonTest = true;
-      break;
-    }
-    delay(1);
-    uint32_t ms = (uint32_t)(millis() - stime);
-    if (ms >= 3000) {
-      break;
-    }
-  }
 }
 static void openAirInit(void) {
   configuration.hasSensorSHT = false;
@@ -804,10 +814,6 @@ static void configUpdateHandle() {
     return;
   }
 
-  if (ag->isOne()) {
-    ledBarEnabledUpdate();
-    stateMachine.executeLedBarTest();
-  }
   stateMachine.executeCo2Calibration();
 
   String mqttUri = configuration.getMqttBrokerUri();
@@ -843,15 +849,36 @@ static void configUpdateHandle() {
 
   if (ag->isOne()) {
     if (configuration.isLedBarBrightnessChanged()) {
-      ag->ledBar.setBrighness(configuration.getLedBarBrightness());
-      Serial.println("Set 'LedBarBrightness' brightness: " +
-                     String(configuration.getLedBarBrightness()));
+      if (configuration.getLedBarBrightness() == 0) {
+        ag->ledBar.setEnable(false);
+      } else {
+        if (configuration.getLedBarMode() != LedBarMode::LedBarModeOff) {
+          ag->ledBar.setEnable(true);
+        }
+        ag->ledBar.setBrightness(configuration.getLedBarBrightness());
+      }
+      ag->ledBar.show();
     }
+
+    if (configuration.isLedBarModeChanged()) {
+      if (configuration.getLedBarBrightness() == 0) {
+        ag->ledBar.setEnable(false);
+      } else {
+        if(configuration.getLedBarMode() == LedBarMode::LedBarModeOff) {
+          ag->ledBar.setEnable(false);
+        } else {
+          ag->ledBar.setEnable(true);
+          ag->ledBar.setBrightness(configuration.getLedBarBrightness());
+        }
+      }
+      ag->ledBar.show();
+    }
+
     if (configuration.isDisplayBrightnessChanged()) {
       oledDisplay.setBrightness(configuration.getDisplayBrightness());
-      Serial.println("Set 'DisplayBrightness' brightness: " +
-                     String(configuration.getDisplayBrightness()));
     }
+
+    stateMachine.executeLedBarTest();
   }
 
   fwNewVersion = configuration.newFirmwareVersion();
@@ -861,7 +888,9 @@ static void configUpdateHandle() {
       doOta = true;
       Serial.println("First OTA");
     } else {
-      if ((measurements.bootCount - measurements.otaBootCount) >= 30) {
+      /** Only check for update each 1h*/
+      const float otaBootCount = 60.0f / (SERVER_SYNC_INTERVAL / 60000.0f);
+      if ((measurements.bootCount - measurements.otaBootCount) >= (int)otaBootCount) {
         doOta = true;
       } else {
         Serial.println(

src/AgApiClient.cpp

@@ -69,11 +69,17 @@ bool AgApiClient::fetchServerConfiguration(void) {
   if (retCode != 200) {
     client.end();
     getConfigFailed = true;
+
+    /** Return code 400 mean device not setup on cloud. */
+    if (retCode == 400) {
+      notAvailableOnDashboard = true;
+    }
     return false;
   }
 
   /** clear failed */
   getConfigFailed = false;
+  notAvailableOnDashboard = false;
 
   /** Get response string */
   String respContent = client.getString();
@@ -144,6 +150,17 @@ bool AgApiClient::isFetchConfigureFailed(void) { return getConfigFailed; }
  */
 bool AgApiClient::isPostToServerFailed(void) { return postToServerFailed; }
 
+/**
+ * @brief Get status device has available on dashboard or not. should get after
+ * fetch configuration return failed
+ *
+ * @return true
+ * @return false
+ */
+bool AgApiClient::isNotAvailableOnDashboard(void) {
+  return notAvailableOnDashboard;
+}
+
 void AgApiClient::setAirGradient(AirGradient *ag) { this->ag = ag; }
 
 /**

src/AgApiClient.h

@@ -23,6 +23,7 @@ private:
 
   bool getConfigFailed;
   bool postToServerFailed;
+  bool notAvailableOnDashboard = false; // Device not setup on Airgradient cloud dashboard.
 
 public:
   AgApiClient(Stream &stream, Configuration &config);
@@ -33,6 +34,7 @@ public:
   bool postToServer(String data);
   bool isFetchConfigureFailed(void);
   bool isPostToServerFailed(void);
+  bool isNotAvailableOnDashboard(void);
   void setAirGradient(AirGradient *ag);
   bool sendPing(int rssi, int bootCount);
 };

src/AgConfigure.cpp

@@ -372,6 +372,7 @@ bool Configuration::parse(String data, bool isLocal) {
     }
   }
 
+  _ledBarModeChanged = false;
   if (JSON.typeof_(root[jprop_ledBarMode]) == "string") {
     String mode = root[jprop_ledBarMode];
     if (mode == getLedBarModeName(LedBarMode::LedBarModeCO2) ||
@@ -380,6 +381,7 @@ bool Configuration::parse(String data, bool isLocal) {
       String oldMode = jconfig[jprop_ledBarMode];
       if (mode != oldMode) {
         jconfig[jprop_ledBarMode] = mode;
+        _ledBarModeChanged = true;
         changed = true;
       }
     } else {
@@ -559,6 +561,7 @@ bool Configuration::parse(String data, bool isLocal) {
     }
   }
 
+  ledBarBrightnessChanged = false;
   if (JSON.typeof_(root[jprop_ledBarBrightness]) == "number") {
     int value = root[jprop_ledBarBrightness];
     int oldValue = jconfig[jprop_ledBarBrightness];
@@ -628,7 +631,6 @@ bool Configuration::parse(String data, bool isLocal) {
     saveConfig();
     printConfig();
   } else {
-    logInfo("Update ignored due to local unofficial changes");
     if (ledBarTestRequested || co2CalibrationRequested) {
       udpated = true;
     }
@@ -1148,6 +1150,12 @@ void Configuration::setOfflineModeWithoutSave(bool offline) {
   _offlineMode = offline;
 }
 
+bool Configuration::isLedBarModeChanged(void) { 
+  bool changed = _ledBarModeChanged;
+  _ledBarModeChanged = false;
+  return changed;
+}
+
 bool Configuration::isDisplayBrightnessChanged(void) {
   bool changed = displayBrightnessChanged;
   displayBrightnessChanged = false;

src/AgConfigure.h

@@ -18,6 +18,7 @@ private:
   bool displayBrightnessChanged = false;
   String otaNewFirmwareVersion;
   bool _offlineMode = false;
+  bool _ledBarModeChanged = false;
 
   AirGradient* ag;
 
@@ -80,6 +81,7 @@ public:
   bool isOfflineMode(void);
   void setOfflineMode(bool offline);
   void setOfflineModeWithoutSave(bool offline);
+  bool isLedBarModeChanged(void);
 };
 
 #endif /** _AG_CONFIG_H_ */

src/AgOledDisplay.cpp

@@ -384,3 +384,13 @@ void OledDisplay::showNewFirmwareFailed(void) {
     setCentralText(60, String("Retry after 24h"));
   } while (DISP()->nextPage());
 }
+
+void OledDisplay::showRebooting(void) {
+  DISP()->firstPage();
+  do {
+    DISP()->setFont(u8g2_font_t0_16_tf);
+    // setCentralText(20, "Firmware Update");
+    setCentralText(40, "Rebooting...");
+    // setCentralText(60, String("Retry after 24h"));
+  } while (DISP()->nextPage());
+}

src/AgOledDisplay.h

@@ -40,6 +40,7 @@ public:
   void showNewFirmwareUpdating(String percent);
   void showNewFirmwareSuccess(String count);
   void showNewFirmwareFailed(void);
+  void showRebooting(void);
 };
 
 #endif /** _AG_OLED_DISPLAY_H_ */

src/AgValue.cpp

@@ -173,7 +173,7 @@ String Measurements::toString(bool localServer, AgFirmwareMode fwMode, int rssi,
       root["noxRaw"] = this->NOxRaw;
     }
   }
-  root["bootCount"] = bootCount;
+  root["boot"] = bootCount;
 
   if (localServer) {
     root["ledMode"] = config->getLedBarModeName();

src/Main/LedBar.cpp

@@ -64,7 +64,7 @@ void LedBar::setColor(uint8_t red, uint8_t green, uint8_t blue, int ledNum) {
  *
  * @param brightness Brightness (0 - 100)%
  */
-void LedBar::setBrighness(uint8_t brightness) {
+void LedBar::setBrightness(uint8_t brightness) {
   if (this->isBegin() == false) {
     return;
   }

src/Main/LedBar.h

@@ -19,7 +19,7 @@ public:
   void begin(void);
   void setColor(uint8_t red, uint8_t green, uint8_t blue, int ledNum);
   void setColor(uint8_t red, uint8_t green, uint8_t blue);
-  void setBrighness(uint8_t brightness);
+  void setBrightness(uint8_t brightness);
   int getNumberOfLeds(void);
   void show(void);
   void clear(void);