Merge branch 'develop'

Fix EPA compensated on top of SLR correction

docs/local-server.md

@@ -41,90 +41,176 @@ You get the following response:
   "bootCount": 6,
   "ledMode": "pm",
   "firmware": "3.1.3",
-  "model": "I-9PSL"
+  "model": "I-9PSL",
+  "monitorDisplayCompensatedValues": true
 }
 ```
 
-| Properties       | Type   | Explanation                                                        |
-|------------------|--------|--------------------------------------------------------------------|
-| `serialno`         | String | Serial Number of the monitor                                       |
-| `wifi`             | Number | WiFi signal strength                                               |
-| `pm01` | Number | PM1 in ug/m3                                       |
-| `pm02` | Number | PM2.5 in ug/m3                                       |
-| `pm10` | Number | PM10 in ug/m3                                       |
-| `pm02Compensated` | Number | PM2.5 in ug/m3 with correction applied (from fw version 3.1.4 onwards)                                       |
-| `rco2`             | Number | CO2 in ppm                                                         |
-| `pm003Count`       | Number | Particle count per dL                                              |
-| `atmp`             | Number | Temperature in Degrees Celsius                                     |
-| `atmpCompensated`             | Number | Temperature in Degrees Celsius with correction applied                                      |
-| `rhum`             | Number | Relative Humidity                                                  |
-| `rhumCompensated`        | Number | Relative Humidity with correction applied                                                  |
-| `tvocIndex`        | Number | Senisiron VOC Index                                                |
-| `tvocRaw`         | Number | VOC raw value                                                      |
-| `noxIndex`         | Number | Senisirion NOx Index                                               |
-| `noxRaw`          | Number | NOx raw value                                                      |
-| `boot`             | Number | Counts every measurement cycle. Low boot counts indicate restarts. |
-| `bootCount`             | Number | Same as boot property. Required for Home Assistant compatability. Will be depreciated. |
-| `ledMode`          | String | Current configuration of the LED mode                              |
-| `firmware`  | String | Current firmware version                                           |
-| `model`           | String | Current model name                                                 |
+| Properties                        | Type    | Explanation                                                                            |
+|-----------------------------------|---------|----------------------------------------------------------------------------------------|
+| `serialno`                        | String  | Serial Number of the monitor                                                           |
+| `wifi`                            | Number  | WiFi signal strength                                                                   |
+| `pm01`                            | Number  | PM1.0 in ug/m3 (atmospheric environment)                                               |
+| `pm02`                            | Number  | PM2.5 in ug/m3 (atmospheric environment)                                               |
+| `pm10`                            | Number  | PM10 in ug/m3 (atmospheric environment)                                                |
+| `pm02Compensated`                 | Number  | PM2.5 in ug/m3 with correction applied (from fw version 3.1.4 onwards)                 |
+| `pm01Standard`                    | Number  | PM1.0 in ug/m3 (standard particle)                                                     |
+| `pm02Standard`                    | Number  | PM2.5 in ug/m3 (standard particle)                                                     |
+| `pm10Standard`                    | Number  | PM10 in ug/m3 (standard particle)                                                      |
+| `rco2`                            | Number  | CO2 in ppm                                                                             |
+| `pm003Count`                      | Number  | Particle count 0.3um per dL                                                            |
+| `pm005Count`                      | Number  | Particle count 0.5um per dL                                                            |
+| `pm01Count`                       | Number  | Particle count 1.0um per dL                                                            |
+| `pm02Count`                       | Number  | Particle count 2.5um per dL                                                            |
+| `pm50Count`                       | Number  | Particle count 5.0um per dL (only for indoor monitor)                                  |
+| `pm10Count`                       | Number  | Particle count 10um per dL (only for indoor monitor)                                   |
+| `atmp`                            | Number  | Temperature in Degrees Celsius                                                         |
+| `atmpCompensated`                 | Number  | Temperature in Degrees Celsius with correction applied                                 |
+| `rhum`                            | Number  | Relative Humidity                                                                      |
+| `rhumCompensated`                 | Number  | Relative Humidity with correction applied                                              |
+| `tvocIndex`                       | Number  | Senisiron VOC Index                                                                    |
+| `tvocRaw`                         | Number  | VOC raw value                                                                          |
+| `noxIndex`                        | Number  | Senisirion NOx Index                                                                   |
+| `noxRaw`                          | Number  | NOx raw value                                                                          |
+| `boot`                            | Number  | Counts every measurement cycle. Low boot counts indicate restarts.                     |
+| `bootCount`                       | Number  | Same as boot property. Required for Home Assistant compatability. (deprecated soon!)   |
+| `ledMode`                         | String  | Current configuration of the LED mode                                                  |
+| `firmware`                        | String  | Current firmware version                                                               |
+| `model`                           | String  | Current model name                                                                     |
 
 Compensated values apply correction algorithms to make the sensor values more accurate. Temperature and relative humidity correction is only applied on the outdoor monitor Open Air but the properties _compensated will still be send also for the indoor monitor AirGradient ONE.
 
 #### Get Configuration Parameters (GET)
-With the path "/config" you can get the current configuration.
+
+"/config" path returns the current configuration of the monitor.
+
 ```json 
 {
-  "country": "US",
+  "country": "TH",
   "pmStandard": "ugm3",
   "ledBarMode": "pm",
-  "displayMode": "on",
-  "abcDays": 30,
+  "abcDays": 7,
   "tvocLearningOffset": 12,
   "noxLearningOffset": 12,
   "mqttBrokerUrl": "",
-  "temperatureUnit": "f",
-  "configurationControl": "both",
-  "postDataToAirGradient": true
+  "temperatureUnit": "c",
+  "configurationControl": "local",
+  "postDataToAirGradient": true,
+  "ledBarBrightness": 100,
+  "displayBrightness": 100,
+  "offlineMode": false,
+  "model": "I-9PSL",
+  "monitorDisplayCompensatedValues": true,
+  "corrections": {
+    "pm02": {
+      "correctionAlgorithm": "epa_2021",
+      "slr": {}
+      }
+    }
+  }
 }
 ```
 
 #### Set Configuration Parameters (PUT)
 
-Configuration parameters can be changed with a put request to the monitor, e.g.
+Configuration parameters can be changed with a PUT request to the monitor, e.g.
 
 Example to force CO2 calibration
 
- ```curl -X PUT -H "Content-Type: application/json" -d '{"co2CalibrationRequested":true}' http://airgradient_84fce612eff4.local/config ```
+ ```bash
+ curl -X PUT -H "Content-Type: application/json" -d '{"co2CalibrationRequested":true}' http://airgradient_84fce612eff4.local/config 
+ ```
 
 Example to set monitor to Celsius
 
- ```curl -X PUT -H "Content-Type: application/json" -d '{"temperatureUnit":"c"}' http://airgradient_84fce612eff4.local/config ```
+ ```bash
+ curl -X PUT -H "Content-Type: application/json" -d '{"temperatureUnit":"c"}' http://airgradient_84fce612eff4.local/config 
+ ```
 
  If you use command prompt on Windows, you need to escape the quotes:
  
   ``` -d "{\"param\":\"value\"}" ```
 
 #### Avoiding Conflicts with Configuration on AirGradient Server
-If the monitor is set up on the AirGradient dashboard, it will also receive configurations from there. In case you do not want this, please set `configurationControl` to `local`. In case you set it to `cloud` and want to change it to `local`, you need to make a factory reset. 
+
+If the monitor is set up on the AirGradient dashboard, it will also receive the configuration parameters from there. In case you do not want this, please set `configurationControl` to `local`. In case you set it to `cloud` and want to change it to `local`, you need to make a factory reset. 
 
 #### Configuration Parameters (GET/PUT)
 
-| Properties              | Description                                            | Type    | Accepted Values                                                                                                                         | Example                                       |
-|-------------------------|:-------------------------------------------------------|---------|-----------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------|
-| `country`                 | Country where the device is.                           | String  | Country code as [ALPHA-2 notation](https://www.iban.com/country-codes)                                                                  | {"country": "TH"}                             |
-| `model`                   | Hardware identifier (only GET).                        | String  | I-9PSL-DE                                                                                                                               | {"model": "I-9PSL-DE"}                        |
-| `pmStandard`              | Particle matter standard used on the display.          | String  | `ugm3`: ug/m3 <br> `us-aqi`: USAQI                                                                                                      | {"pmStandard": "ugm3"}                        |
-| `ledBarMode`              | Mode in which the led bar can be set.                  | String  | `co2`: LED bar displays CO2 <br>`pm`: LED bar displays PM <br>`off`: Turn off LED bar                                                   | {"ledBarMode": "off"}                         |
-| `displayBrightness`       | Brightness of the Display.                             | Number  | 0-100                                                                                                                                   | {"displayBrightness": 50}                     |
-| `ledBarBrightness`        | Brightness of the LEDBar.                              | Number  | 0-100                                                                                                                                   | {"ledBarBrightness": 40}                      |
-| `abcDays`                 | Number of days for CO2 automatic baseline calibration. | Number  | Maximum 200 days. Default 8 days.                                                                                                       | {"abcDays": 8}                                |
-| `mqttBrokerUrl`           | MQTT broker URL.                                       | String  |                                                                                                                                         | {"mqttBrokerUrl": "mqtt://192.168.0.18:1883"} |
-| `temperatureUnit`         | Temperature unit shown on the display.                 | String  | `c` or `C`: Degree Celsius °C <br>`f` or `F`: Degree Fahrenheit °F                                                                      | {"temperatureUnit": "c"}                      |
-| `configurationControl`    | The configuration source of the device.                | String  | `both`: Accept local and cloud configuration <br>`local`: Accept only local configuration  <br>`cloud`: Accept only cloud configuration | {"configurationControl": "both"}              |
-| `postDataToAirGradient`   | Send data to AirGradient cloud.                        | Boolean | `true`: Enabled <br>`false`: Disabled                                                                                                   | {"postDataToAirGradient": true}               |
-| `co2CalibrationRequested` | Can be set to trigger a calibration.                   | Boolean | `true`: CO2 calibration (400ppm) will be triggered                                                                                      | {"co2CalibrationRequested": true}             |
-| `ledBarTestRequested`     | Can be set to trigger a test.                          | Boolean | `true` : LEDs will run test sequence                                                                                                    | {"ledBarTestRequested": true}                 |
-| `noxLearningOffset`       | Set NOx learning gain offset.                          | Number  | 0-720 (default 12)                                                                                                                      | {"noxLearningOffset": 12}                     |
-| `tvocLearningOffset`      | Set VOC learning gain offset.                          | Number  | 0-720 (default 12)                                                                                                                      | {"tvocLearningOffset": 12}                    |
-| `offlineMode`             | Set monitor to run without WiFi.                       | Boolean |  `false`: Disabled (default) <br> `true`: Enabled                                                                                                              | {"offlineMode": true}                         |
+| Properties                        | Description                                                      | Type    | Accepted Values                                                                                                                         | Example                                         |
+|-----------------------------------|:-----------------------------------------------------------------|---------|-----------------------------------------------------------------------------------------------------------------------------------------|-------------------------------------------------|
+| `country`                         | Country where the device is.                                     | String  | Country code as [ALPHA-2 notation](https://www.iban.com/country-codes)                                                                  | `{"country": "TH"}`                             |
+| `model`                           | Hardware identifier (only GET).                                  | String  | I-9PSL-DE                                                                                                                               | `{"model": "I-9PSL-DE"}`                        |
+| `pmStandard`                      | Particle matter standard used on the display.                    | String  | `ugm3`: ug/m3 <br> `us-aqi`: USAQI                                                                                                      | `{"pmStandard": "ugm3"}`                        |
+| `ledBarMode`                      | Mode in which the led bar can be set.                            | String  | `co2`: LED bar displays CO2 <br>`pm`: LED bar displays PM <br>`off`: Turn off LED bar                                                   | `{"ledBarMode": "off"}`                         |
+| `displayBrightness`               | Brightness of the Display.                                       | Number  | 0-100                                                                                                                                   | `{"displayBrightness": 50}`                     |
+| `ledBarBrightness`                | Brightness of the LEDBar.                                        | Number  | 0-100                                                                                                                                   | `{"ledBarBrightness": 40}`                      |
+| `abcDays`                         | Number of days for CO2 automatic baseline calibration.           | Number  | Maximum 200 days. Default 8 days.                                                                                                       | `{"abcDays": 8}`                                |
+| `mqttBrokerUrl`                   | MQTT broker URL.                                                 | String  |                                                                                                                                         | `{"mqttBrokerUrl": "mqtt://192.168.0.18:1883"}` |
+| `temperatureUnit`                 | Temperature unit shown on the display.                           | String  | `c` or `C`: Degree Celsius °C <br>`f` or `F`: Degree Fahrenheit °F                                                                      | `{"temperatureUnit": "c"}`                      |
+| `configurationControl`            | The configuration source of the device.                          | String  | `both`: Accept local and cloud configuration <br>`local`: Accept only local configuration  <br>`cloud`: Accept only cloud configuration | `{"configurationControl": "both"}`              |
+| `postDataToAirGradient`           | Send data to AirGradient cloud.                                  | Boolean | `true`: Enabled <br>`false`: Disabled                                                                                                   | `{"postDataToAirGradient": true}`               |
+| `co2CalibrationRequested`         | Can be set to trigger a calibration.                             | Boolean | `true`: CO2 calibration (400ppm) will be triggered                                                                                      | `{"co2CalibrationRequested": true}`             |
+| `ledBarTestRequested`             | Can be set to trigger a test.                                    | Boolean | `true` : LEDs will run test sequence                                                                                                    | `{"ledBarTestRequested": true}`                 |
+| `noxLearningOffset`               | Set NOx learning gain offset.                                    | Number  | 0-720 (default 12)                                                                                                                      | `{"noxLearningOffset": 12}`                     |
+| `tvocLearningOffset`              | Set VOC learning gain offset.                                    | Number  | 0-720 (default 12)                                                                                                                      | `{"tvocLearningOffset": 12}`                    |
+| `offlineMode`                     | Set monitor to run without WiFi.                                 | Boolean |  `false`: Disabled (default) <br> `true`: Enabled                                                                                       | `{"offlineMode": true}`                         |
+| `monitorDisplayCompensatedValues` | Set the display show the PM value with/without compensate  value (only on [3.1.9]()) | Boolean | `false`: Without compensate (default) <br> `true`: with compensate                                                                      | `{"monitorDisplayCompensatedValues": false }`   |
+| `corrections`                     | Sets correction options to display and measurement values on local server response. (version >= [3.1.11]())    | Object |  _see corrections section_             | _see corrections section_                         |
+
+
+
+#### Corrections
+
+The `corrections` object allows configuring PM2.5 correction algorithms and parameters locally. This affects both the display and local server response values.
+
+Example correction configuration:
+
+```json
+{
+  "corrections": {
+    "pm02": {
+      "correctionAlgorithm": "<Option In String>",
+      "slr": {
+        "intercept": 0,
+        "scalingFactor": 0,
+        "useEpa2021": false
+      }
+    }
+  }
+}
+```
+
+| Algorithm | Value | Description | SLR required |
+|------------|-------------|------|---------| 
+| Raw | `"none"` | No correction (default) | No |
+| EPA 2021 | `"epa_2021"` | Use EPA 2021 correction factors on top of raw value | No |
+| PMS5003_20240104 | `"slr_PMS5003_20240104"` | Correction for PMS5003 sensor batch 20240104| Yes | 
+| PMS5003_20231218 | `"slr_PMS5003_20231218"` | Correction for PMS5003 sensor batch 20231218| Yes |
+| PMS5003_20231030 | `"slr_PMS5003_20231030"` | Correction for PMS5003 sensor batch 20231030| Yes |
+
+**NOTES**: 
+
+- Set `useEpa2021` to `true` if want to apply EPA 2021 correction factors on top of SLR correction value, otherwise `false`
+- `intercept` and `scalingFactor` values can be obtained from [this article](https://www.airgradient.com/blog/low-readings-from-pms5003/)
+- If `configurationControl` is set to `local` (eg. when using Home Assistant), correction need to be set manually, see examples below 
+
+**Examples**:
+
+- PMS5003_20231030 
+
+```bash
+curl --location -X PUT 'http://airgradient_84fce612eff4.local/config' --header 'Content-Type: application/json' --data '{"corrections":{"pm02":{"correctionAlgorithm":"slr_PMS5003_20231030","slr":{"intercept":0,"scalingFactor":0.02838,"useEpa2021":true}}}}'
+```
+
+- PMS5003_20231218 
+
+```bash
+curl --location -X PUT 'http://airgradient_84fce612eff4.local/config' --header 'Content-Type: application/json' --data '{"corrections":{"pm02":{"correctionAlgorithm":"slr_PMS5003_20231218","slr":{"intercept":0,"scalingFactor":0.03525,"useEpa2021":true}}}}'
+```
+
+- PMS5003_20240104 
+
+```bash
+curl --location -X PUT 'http://airgradient_84fce612eff4.local/config' --header 'Content-Type: application/json' --data '{"corrections":{"pm02":{"correctionAlgorithm":"slr_PMS5003_20240104","slr":{"intercept":0,"scalingFactor":0.02896,"useEpa2021":true}}}}'
+```

examples/BASIC/BASIC.ino

@@ -49,9 +49,8 @@ CC BY-SA 4.0 Attribution-ShareAlike 4.0 International License
 #define SENSOR_TVOC_UPDATE_INTERVAL 1000              /** ms */
 #define SENSOR_CO2_UPDATE_INTERVAL 4000               /** ms */
 #define SENSOR_PM_UPDATE_INTERVAL 2000                /** ms */
-#define SENSOR_TEMP_HUM_UPDATE_INTERVAL 2000          /** ms */
+#define SENSOR_TEMP_HUM_UPDATE_INTERVAL 6000          /** ms */
 #define DISPLAY_DELAY_SHOW_CONTENT_MS 2000            /** ms */
-#define FIRMWARE_CHECK_FOR_UPDATE_MS (60 * 60 * 1000) /** ms */
 
 static AirGradient ag(DIY_BASIC);
 static Configuration configuration(Serial);
@@ -68,8 +67,6 @@ static LocalServer localServer(Serial, openMetrics, measurements, configuration,
                                wifiConnector);
 static MqttClient mqttClient(Serial);
 
-static int pmFailCount = 0;
-static int getCO2FailCount = 0;
 static AgFirmwareMode fwMode = FW_MODE_I_BASIC_40PS;
 
 static String fwNewVersion;
@@ -91,6 +88,8 @@ static void wdgFeedUpdate(void);
 static bool sgp41Init(void);
 static void wifiFactoryConfigure(void);
 static void mqttHandle(void);
+static int calculateMaxPeriod(int updateInterval);
+static void setMeasurementMaxPeriod();
 
 AgSchedule dispLedSchedule(DISP_UPDATE_INTERVAL, oledDisplaySchedule);
 AgSchedule configSchedule(SERVER_CONFIG_SYNC_INTERVAL,
@@ -131,6 +130,10 @@ void setup() {
 
   /** Init sensor */
   boardInit();
+  setMeasurementMaxPeriod();
+
+  // Uncomment below line to print every measurements reading update
+  // measurements.setDebug(true);
 
   /** Connecting wifi */
   bool connectToWifi = false;
@@ -207,11 +210,7 @@ void loop() {
     tvocSchedule.run();
   }
 
-  /** Auto reset watchdog timer if offline mode or postDataToAirGradient */
-  if (configuration.isOfflineMode() ||
-      (configuration.isPostDataToAirGradient() == false)) {
-    watchdogFeedSchedule.run();
-  }
+  watchdogFeedSchedule.run();
 
   /** Check for handle WiFi reconnect */
   wifiConnector.handle();
@@ -235,17 +234,16 @@ void loop() {
 }
 
 static void co2Update(void) {
+  if (!configuration.hasSensorS8) {
+    // Device don't have S8 sensor
+    return;
+  }
+
   int value = ag.s8.getCo2();
   if (utils::isValidCO2(value)) {
-    measurements.CO2 = value;
-    getCO2FailCount = 0;
-    Serial.printf("CO2 (ppm): %d\r\n", measurements.CO2);
+    measurements.update(Measurements::CO2, value);
   } else {
-    getCO2FailCount++;
-    Serial.printf("Get CO2 failed: %d\r\n", getCO2FailCount);
-    if (getCO2FailCount >= 3) {
-      measurements.CO2 = utils::getInvalidCO2();
-    }
+    measurements.update(Measurements::CO2, utils::getInvalidCO2());
   }
 }
 
@@ -267,18 +265,23 @@ static void mdnsInit(void) {
 }
 
 static void initMqtt(void) {
-  if (mqttClient.begin(configuration.getMqttBrokerUri())) {
-    Serial.println("Setup connect to MQTT broker successful");
+  String mqttUri = configuration.getMqttBrokerUri();
+  if (mqttUri.isEmpty()) {
+    Serial.println(
+        "MQTT is not configured, skipping initialization of MQTT client");
+    return;
+  }
+
+  if (mqttClient.begin(mqttUri)) {
+    Serial.println("Successfully connected to MQTT broker");
   } else {
-    Serial.println("setup Connect to MQTT broker failed");
+    Serial.println("Connection to MQTT broker failed");
   }
 }
 
 static void wdgFeedUpdate(void) {
   ag.watchdog.reset();
-  Serial.println();
-  Serial.println("Offline mode or isPostToAirGradient = false: watchdog reset");
-  Serial.println();
+  Serial.println("External watchdog feed!");
 }
 
 static bool sgp41Init(void) {
@@ -313,8 +316,7 @@ static void mqttHandle(void) {
   }
 
   if (mqttClient.isConnected()) {
-    String payload = measurements.toString(true, fwMode, wifiConnector.RSSI(),
-                                           &ag, &configuration);
+    String payload = measurements.toString(true, fwMode, wifiConnector.RSSI(), ag, configuration);
     String topic = "airgradient/readings/" + ag.deviceId();
     if (mqttClient.publish(topic.c_str(), payload.c_str(), payload.length())) {
       Serial.println("MQTT sync success");
@@ -490,84 +492,98 @@ static void oledDisplaySchedule(void) {
 }
 
 static void updateTvoc(void) {
-  measurements.TVOC = ag.sgp41.getTvocIndex();
-  measurements.TVOCRaw = ag.sgp41.getTvocRaw();
-  measurements.NOx = ag.sgp41.getNoxIndex();
-  measurements.NOxRaw = ag.sgp41.getNoxRaw();
+  if (!configuration.hasSensorSGP) {
+    return;
+  }
 
-  Serial.println();
-  Serial.printf("TVOC index: %d\r\n", measurements.TVOC);
-  Serial.printf("TVOC raw: %d\r\n", measurements.TVOCRaw);
-  Serial.printf("NOx index: %d\r\n", measurements.NOx);
-  Serial.printf("NOx raw: %d\r\n", measurements.NOxRaw);
+  measurements.update(Measurements::TVOC, ag.sgp41.getTvocIndex());
+  measurements.update(Measurements::TVOCRaw, ag.sgp41.getTvocRaw());
+  measurements.update(Measurements::NOx, ag.sgp41.getNoxIndex());
+  measurements.update(Measurements::NOxRaw, ag.sgp41.getNoxRaw());
 }
 
 static void updatePm(void) {
-  if (ag.pms5003.isFailed() == false) {
-    measurements.pm01_1 = ag.pms5003.getPm01Ae();
-    measurements.pm25_1 = ag.pms5003.getPm25Ae();
-    measurements.pm10_1 = ag.pms5003.getPm10Ae();
-    measurements.pm03PCount_1 = ag.pms5003.getPm03ParticleCount();
-
-    Serial.println();
-    Serial.printf("PM1 ug/m3: %d\r\n", measurements.pm01_1);
-    Serial.printf("PM2.5 ug/m3: %d\r\n", measurements.pm25_1);
-    Serial.printf("PM10 ug/m3: %d\r\n", measurements.pm10_1);
-    Serial.printf("PM0.3 Count: %d\r\n", measurements.pm03PCount_1);
-    pmFailCount = 0;
+  if (ag.pms5003.connected()) {
+    measurements.update(Measurements::PM01, ag.pms5003.getPm01Ae());
+    measurements.update(Measurements::PM25, ag.pms5003.getPm25Ae());
+    measurements.update(Measurements::PM10, ag.pms5003.getPm10Ae());
+    measurements.update(Measurements::PM03_PC, ag.pms5003.getPm03ParticleCount());
   } else {
-    pmFailCount++;
-    Serial.printf("PMS read failed: %d\r\n", pmFailCount);
-    if (pmFailCount >= 3) {
-      measurements.pm01_1 = utils::getInvalidPMS();
-      measurements.pm25_1 = utils::getInvalidPMS();
-      measurements.pm10_1 = utils::getInvalidPMS();
-      measurements.pm03PCount_1 = utils::getInvalidPMS();
-    }
+    measurements.update(Measurements::PM01, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM25, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM10, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM03_PC, utils::getInvalidPmValue());
   }
 }
 
 static void sendDataToServer(void) {
+  /** Increment bootcount when send measurements data is scheduled */
+  measurements.bootCount++;
+
   /** Ignore send data to server if postToAirGradient disabled */
   if (configuration.isPostDataToAirGradient() == false ||
       configuration.isOfflineMode()) {
     return;
   }
 
-  String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI(),
-                                          &ag, &configuration);
+  String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI(), ag, configuration);
   if (apiClient.postToServer(syncData)) {
-    ag.watchdog.reset();
     Serial.println();
     Serial.println(
         "Online mode and isPostToAirGradient = true: watchdog reset");
     Serial.println();
   }
-
-  measurements.bootCount++;
 }
 
 static void tempHumUpdate(void) {
-  delay(100);
   if (ag.sht.measure()) {
-    measurements.Temperature = ag.sht.getTemperature();
-    measurements.Humidity = ag.sht.getRelativeHumidity();
+    float temp = ag.sht.getTemperature();
+    float rhum = ag.sht.getRelativeHumidity();
 
-    Serial.printf("Temperature in C: %0.2f\r\n", measurements.Temperature);
-    Serial.printf("Relative Humidity: %d\r\n", measurements.Humidity);
-    Serial.printf("Temperature compensated in C: %0.2f\r\n",
-                  measurements.Temperature);
-    Serial.printf("Relative Humidity compensated: %d\r\n",
-                  measurements.Humidity);
+    measurements.update(Measurements::Temperature, temp);
+    measurements.update(Measurements::Humidity, rhum);
 
     // Update compensation temperature and humidity for SGP41
     if (configuration.hasSensorSGP) {
-      ag.sgp41.setCompensationTemperatureHumidity(measurements.Temperature,
-                                                  measurements.Humidity);
+      ag.sgp41.setCompensationTemperatureHumidity(temp, rhum);
     }
   } else {
+    measurements.update(Measurements::Temperature, utils::getInvalidTemperature());
+    measurements.update(Measurements::Humidity, utils::getInvalidHumidity());
     Serial.println("SHT read failed");
-    measurements.Temperature = utils::getInvalidTemperature();
-    measurements.Humidity = utils::getInvalidHumidity();
   }
 }
+
+/* Set max period for each measurement type based on sensor update interval*/
+void setMeasurementMaxPeriod() {
+  /// Max period for S8 sensors measurements
+  measurements.maxPeriod(Measurements::CO2, calculateMaxPeriod(SENSOR_CO2_UPDATE_INTERVAL));
+  /// Max period for SGP sensors measurements
+  measurements.maxPeriod(Measurements::TVOC, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::TVOCRaw, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::NOx, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::NOxRaw, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  /// Max period for PMS sensors measurements
+  measurements.maxPeriod(Measurements::PM25, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::PM01, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::PM10, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::PM03_PC, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  // Temperature and Humidity
+  if (configuration.hasSensorSHT) {
+    /// Max period for SHT sensors measurements
+    measurements.maxPeriod(Measurements::Temperature,
+                           calculateMaxPeriod(SENSOR_TEMP_HUM_UPDATE_INTERVAL));
+    measurements.maxPeriod(Measurements::Humidity,
+                           calculateMaxPeriod(SENSOR_TEMP_HUM_UPDATE_INTERVAL));
+  } else {
+    /// Temp and hum data retrieved from PMS5003T sensor
+    measurements.maxPeriod(Measurements::Temperature,
+                           calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+    measurements.maxPeriod(Measurements::Humidity, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  }
+}
+
+int calculateMaxPeriod(int updateInterval) {
+  // 0.5 is 50% reduced interval for max period
+  return (SERVER_SYNC_INTERVAL - (SERVER_SYNC_INTERVAL * 0.5)) / updateInterval;
+}

examples/BASIC/LocalServer.cpp

@@ -53,9 +53,8 @@ void LocalServer::_GET_metrics(void) {
 }
 
 void LocalServer::_GET_measure(void) {
-  server.send(
-      200, "application/json",
-      measure.toString(true, fwMode, wifiConnector.RSSI(), ag, &config));
+  String toSend = measure.toString(true, fwMode, wifiConnector.RSSI(), *ag, config);
+  server.send(200, "application/json", toSend);
 }
 
 void LocalServer::setFwMode(AgFirmwareMode fwMode) { this->fwMode = fwMode; }

examples/BASIC/OpenMetrics.cpp

@@ -67,50 +67,61 @@ String OpenMetrics::getPayload(void) {
 
   float _temp = utils::getInvalidTemperature();
   float _hum = utils::getInvalidHumidity();
-  int pm01 = utils::getInvalidPMS();
-  int pm25 = utils::getInvalidPMS();
-  int pm10 = utils::getInvalidPMS();
-  int pm03PCount = utils::getInvalidPMS();
+  int pm01 = utils::getInvalidPmValue();
+  int pm25 = utils::getInvalidPmValue();
+  int pm10 = utils::getInvalidPmValue();
+  int pm03PCount = utils::getInvalidPmValue();
   int atmpCompensated = utils::getInvalidTemperature();
   int ahumCompensated = utils::getInvalidHumidity();
+  int tvoc = utils::getInvalidVOC();
+  int tvoc_raw = utils::getInvalidVOC();
+  int nox = utils::getInvalidNOx();
+  int nox_raw = utils::getInvalidNOx();
 
   if (config.hasSensorSHT) {
-    _temp = measure.Temperature;
-    _hum = measure.Humidity;
+    _temp = measure.getFloat(Measurements::Temperature);
+    _hum = measure.getFloat(Measurements::Humidity);
     atmpCompensated = _temp;
     ahumCompensated = _hum;
   }
 
   if (config.hasSensorPMS1) {
-    pm01 = measure.pm01_1;
-    pm25 = measure.pm25_1;
-    pm10 = measure.pm10_1;
-    pm03PCount = measure.pm03PCount_1;
+    pm01 = measure.get(Measurements::PM01);
+    pm25 = measure.get(Measurements::PM25);
+    pm10 = measure.get(Measurements::PM10);
+    pm03PCount = measure.get(Measurements::PM03_PC);
+  }
+
+  if (config.hasSensorSGP) {
+    tvoc = measure.get(Measurements::TVOC);
+    tvoc_raw = measure.get(Measurements::TVOCRaw);
+    nox = measure.get(Measurements::NOx);
+    nox_raw = measure.get(Measurements::NOxRaw);
   }
 
   if (config.hasSensorPMS1) {
-    if (utils::isValidPMS(pm01)) {
+    if (utils::isValidPm(pm01)) {
       add_metric("pm1",
                  "PM1.0 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm01));
     }
-    if (utils::isValidPMS(pm25)) {
+    if (utils::isValidPm(pm25)) {
       add_metric("pm2d5",
                  "PM2.5 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm25));
     }
-    if (utils::isValidPMS(pm10)) {
+    if (utils::isValidPm(pm10)) {
       add_metric("pm10",
                  "PM10 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm10));
     }
-    if (utils::isValidPMS03Count(pm03PCount)) {
+    if (utils::isValidPm03Count(pm03PCount)) {
       add_metric("pm0d3",
                  "PM0.3 concentration as measured by the AirGradient PMS "
                  "sensor, in number of particules per 100 milliliters",
@@ -120,33 +131,33 @@ String OpenMetrics::getPayload(void) {
   }
 
   if (config.hasSensorSGP) {
-    if (utils::isValidVOC(measure.TVOC)) {
+    if (utils::isValidVOC(tvoc)) {
       add_metric("tvoc_index",
                  "The processed Total Volatile Organic Compounds (TVOC) index "
                  "as measured by the AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.TVOC));
+      add_metric_point("", String(tvoc));
     }
-    if (utils::isValidVOC(measure.TVOCRaw)) {
+    if (utils::isValidVOC(tvoc_raw)) {
       add_metric("tvoc_raw",
                  "The raw input value to the Total Volatile Organic Compounds "
                  "(TVOC) index as measured by the AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.TVOCRaw));
+      add_metric_point("", String(tvoc_raw));
     }
-    if (utils::isValidNOx(measure.NOx)) {
+    if (utils::isValidNOx(nox)) {
       add_metric("nox_index",
                  "The processed Nitrous Oxide (NOx) index as measured by the "
                  "AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.NOx));
+      add_metric_point("", String(nox));
     }
-    if (utils::isValidNOx(measure.NOxRaw)) {
+    if (utils::isValidNOx(nox_raw)) {
       add_metric("nox_raw",
                  "The raw input value to the Nitrous Oxide (NOx) index as "
                  "measured by the AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.NOxRaw));
+      add_metric_point("", String(nox_raw));
     }
   }
 

examples/DiyProIndoorV3_3/DiyProIndoorV3_3.ino

@@ -49,9 +49,8 @@ CC BY-SA 4.0 Attribution-ShareAlike 4.0 International License
 #define SENSOR_TVOC_UPDATE_INTERVAL 1000              /** ms */
 #define SENSOR_CO2_UPDATE_INTERVAL 4000               /** ms */
 #define SENSOR_PM_UPDATE_INTERVAL 2000                /** ms */
-#define SENSOR_TEMP_HUM_UPDATE_INTERVAL 2000          /** ms */
+#define SENSOR_TEMP_HUM_UPDATE_INTERVAL 6000          /** ms */
 #define DISPLAY_DELAY_SHOW_CONTENT_MS 2000            /** ms */
-#define FIRMWARE_CHECK_FOR_UPDATE_MS (60 * 60 * 1000) /** ms */
 
 static AirGradient ag(DIY_PRO_INDOOR_V3_3);
 static Configuration configuration(Serial);
@@ -68,8 +67,6 @@ static LocalServer localServer(Serial, openMetrics, measurements, configuration,
                                wifiConnector);
 static MqttClient mqttClient(Serial);
 
-static int pmFailCount = 0;
-static int getCO2FailCount = 0;
 static AgFirmwareMode fwMode = FW_MODE_I_33PS;
 
 static String fwNewVersion;
@@ -91,6 +88,8 @@ static void wdgFeedUpdate(void);
 static bool sgp41Init(void);
 static void wifiFactoryConfigure(void);
 static void mqttHandle(void);
+static int calculateMaxPeriod(int updateInterval);
+static void setMeasurementMaxPeriod();
 
 AgSchedule dispLedSchedule(DISP_UPDATE_INTERVAL, oledDisplaySchedule);
 AgSchedule configSchedule(SERVER_CONFIG_SYNC_INTERVAL,
@@ -131,6 +130,10 @@ void setup() {
 
   /** Init sensor */
   boardInit();
+  setMeasurementMaxPeriod();
+
+  // Uncomment below line to print every measurements reading update
+  // measurements.setDebug(true);
 
   /** Connecting wifi */
   bool connectToWifi = false;
@@ -205,11 +208,7 @@ void loop() {
     tvocSchedule.run();
   }
 
-  /** Auto reset watchdog timer if offline mode or postDataToAirGradient */
-  if (configuration.isOfflineMode() ||
-      (configuration.isPostDataToAirGradient() == false)) {
-    watchdogFeedSchedule.run();
-  }
+  watchdogFeedSchedule.run();
 
   /** Check for handle WiFi reconnect */
   wifiConnector.handle();
@@ -233,17 +232,16 @@ void loop() {
 }
 
 static void co2Update(void) {
+  if (!configuration.hasSensorS8) {
+    // Device don't have S8 sensor
+    return;
+  }
+
   int value = ag.s8.getCo2();
   if (utils::isValidCO2(value)) {
-    measurements.CO2 = value;
-    getCO2FailCount = 0;
-    Serial.printf("CO2 (ppm): %d\r\n", measurements.CO2);
+    measurements.update(Measurements::CO2, value);
   } else {
-    getCO2FailCount++;
-    Serial.printf("Get CO2 failed: %d\r\n", getCO2FailCount);
-    if (getCO2FailCount >= 3) {
-      measurements.CO2 = utils::getInvalidCO2();
-    }
+    measurements.update(Measurements::CO2, utils::getInvalidCO2());
   }
 }
 
@@ -265,10 +263,17 @@ static void mdnsInit(void) {
 }
 
 static void initMqtt(void) {
-  if (mqttClient.begin(configuration.getMqttBrokerUri())) {
-    Serial.println("Setup connect to MQTT broker successful");
+  String mqttUri = configuration.getMqttBrokerUri();
+  if (mqttUri.isEmpty()) {
+    Serial.println(
+        "MQTT is not configured, skipping initialization of MQTT client");
+    return;
+  }
+
+  if (mqttClient.begin(mqttUri)) {
+    Serial.println("Successfully connected to MQTT broker");
   } else {
-    Serial.println("setup Connect to MQTT broker failed");
+    Serial.println("Connection to MQTT broker failed");
   }
 }
 
@@ -333,9 +338,7 @@ static void factoryConfigReset(void) {
 
 static void wdgFeedUpdate(void) {
   ag.watchdog.reset();
-  Serial.println();
-  Serial.println("Offline mode or isPostToAirGradient = false: watchdog reset");
-  Serial.println();
+  Serial.println("External watchdog feed!");
 }
 
 static bool sgp41Init(void) {
@@ -370,8 +373,7 @@ static void mqttHandle(void) {
   }
 
   if (mqttClient.isConnected()) {
-    String payload = measurements.toString(true, fwMode, wifiConnector.RSSI(),
-                                           &ag, &configuration);
+    String payload = measurements.toString(true, fwMode, wifiConnector.RSSI(), ag, configuration);
     String topic = "airgradient/readings/" + ag.deviceId();
     if (mqttClient.publish(topic.c_str(), payload.c_str(), payload.length())) {
       Serial.println("MQTT sync success");
@@ -542,84 +544,98 @@ static void oledDisplaySchedule(void) {
 }
 
 static void updateTvoc(void) {
-  measurements.TVOC = ag.sgp41.getTvocIndex();
-  measurements.TVOCRaw = ag.sgp41.getTvocRaw();
-  measurements.NOx = ag.sgp41.getNoxIndex();
-  measurements.NOxRaw = ag.sgp41.getNoxRaw();
+  if (!configuration.hasSensorSGP) {
+    return;
+  }
 
-  Serial.println();
-  Serial.printf("TVOC index: %d\r\n", measurements.TVOC);
-  Serial.printf("TVOC raw: %d\r\n", measurements.TVOCRaw);
-  Serial.printf("NOx index: %d\r\n", measurements.NOx);
-  Serial.printf("NOx raw: %d\r\n", measurements.NOxRaw);
+  measurements.update(Measurements::TVOC, ag.sgp41.getTvocIndex());
+  measurements.update(Measurements::TVOCRaw, ag.sgp41.getTvocRaw());
+  measurements.update(Measurements::NOx, ag.sgp41.getNoxIndex());
+  measurements.update(Measurements::NOxRaw, ag.sgp41.getNoxRaw());
 }
 
 static void updatePm(void) {
-  if (ag.pms5003.isFailed() == false) {
-    measurements.pm01_1 = ag.pms5003.getPm01Ae();
-    measurements.pm25_1 = ag.pms5003.getPm25Ae();
-    measurements.pm10_1 = ag.pms5003.getPm10Ae();
-    measurements.pm03PCount_1 = ag.pms5003.getPm03ParticleCount();
-
-    Serial.println();
-    Serial.printf("PM1 ug/m3: %d\r\n", measurements.pm01_1);
-    Serial.printf("PM2.5 ug/m3: %d\r\n", measurements.pm25_1);
-    Serial.printf("PM10 ug/m3: %d\r\n", measurements.pm10_1);
-    Serial.printf("PM0.3 Count: %d\r\n", measurements.pm03PCount_1);
-    pmFailCount = 0;
+  if (ag.pms5003.connected()) {
+    measurements.update(Measurements::PM01, ag.pms5003.getPm01Ae());
+    measurements.update(Measurements::PM25, ag.pms5003.getPm25Ae());
+    measurements.update(Measurements::PM10, ag.pms5003.getPm10Ae());
+    measurements.update(Measurements::PM03_PC, ag.pms5003.getPm03ParticleCount());
   } else {
-    pmFailCount++;
-    Serial.printf("PMS read failed: %d\r\n", pmFailCount);
-    if (pmFailCount >= 3) {
-      measurements.pm01_1 = utils::getInvalidPMS();
-      measurements.pm25_1 = utils::getInvalidPMS();
-      measurements.pm10_1 = utils::getInvalidPMS();
-      measurements.pm03PCount_1 = utils::getInvalidPMS();
-    }
+    measurements.update(Measurements::PM01, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM25, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM10, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM03_PC, utils::getInvalidPmValue());
   }
 }
 
 static void sendDataToServer(void) {
+  /** Increment bootcount when send measurements data is scheduled */
+  measurements.bootCount++;
+
   /** Ignore send data to server if postToAirGradient disabled */
   if (configuration.isPostDataToAirGradient() == false ||
       configuration.isOfflineMode()) {
     return;
   }
 
-  String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI(),
-                                          &ag, &configuration);
+  String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI(), ag, configuration);
   if (apiClient.postToServer(syncData)) {
-    ag.watchdog.reset();
     Serial.println();
     Serial.println(
         "Online mode and isPostToAirGradient = true: watchdog reset");
     Serial.println();
   }
-
-  measurements.bootCount++;
 }
 
 static void tempHumUpdate(void) {
-  delay(100);
   if (ag.sht.measure()) {
-    measurements.Temperature = ag.sht.getTemperature();
-    measurements.Humidity = ag.sht.getRelativeHumidity();
+    float temp = ag.sht.getTemperature();
+    float rhum = ag.sht.getRelativeHumidity();
 
-    Serial.printf("Temperature in C: %0.2f\r\n", measurements.Temperature);
-    Serial.printf("Relative Humidity: %d\r\n", measurements.Humidity);
-    Serial.printf("Temperature compensated in C: %0.2f\r\n",
-                  measurements.Temperature);
-    Serial.printf("Relative Humidity compensated: %d\r\n",
-                  measurements.Humidity);
+    measurements.update(Measurements::Temperature, temp);
+    measurements.update(Measurements::Humidity, rhum);
 
     // Update compensation temperature and humidity for SGP41
     if (configuration.hasSensorSGP) {
-      ag.sgp41.setCompensationTemperatureHumidity(measurements.Temperature,
-                                                  measurements.Humidity);
+      ag.sgp41.setCompensationTemperatureHumidity(temp, rhum);
     }
   } else {
+    measurements.update(Measurements::Temperature, utils::getInvalidTemperature());
+    measurements.update(Measurements::Humidity, utils::getInvalidHumidity());
     Serial.println("SHT read failed");
-    measurements.Temperature = utils::getInvalidTemperature();
-    measurements.Humidity = utils::getInvalidHumidity();
   }
 }
+
+/* Set max period for each measurement type based on sensor update interval*/
+void setMeasurementMaxPeriod() {
+  /// Max period for S8 sensors measurements
+  measurements.maxPeriod(Measurements::CO2, calculateMaxPeriod(SENSOR_CO2_UPDATE_INTERVAL));
+  /// Max period for SGP sensors measurements
+  measurements.maxPeriod(Measurements::TVOC, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::TVOCRaw, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::NOx, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::NOxRaw, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  /// Max period for PMS sensors measurements
+  measurements.maxPeriod(Measurements::PM25, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::PM01, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::PM10, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::PM03_PC, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  // Temperature and Humidity
+  if (configuration.hasSensorSHT) {
+    /// Max period for SHT sensors measurements
+    measurements.maxPeriod(Measurements::Temperature,
+                           calculateMaxPeriod(SENSOR_TEMP_HUM_UPDATE_INTERVAL));
+    measurements.maxPeriod(Measurements::Humidity,
+                           calculateMaxPeriod(SENSOR_TEMP_HUM_UPDATE_INTERVAL));
+  } else {
+    /// Temp and hum data retrieved from PMS5003T sensor
+    measurements.maxPeriod(Measurements::Temperature,
+                           calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+    measurements.maxPeriod(Measurements::Humidity, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  }
+}
+
+int calculateMaxPeriod(int updateInterval) {
+  // 0.5 is 50% reduced interval for max period
+  return (SERVER_SYNC_INTERVAL - (SERVER_SYNC_INTERVAL * 0.5)) / updateInterval;
+}

examples/DiyProIndoorV3_3/LocalServer.cpp

@@ -53,9 +53,8 @@ void LocalServer::_GET_metrics(void) {
 }
 
 void LocalServer::_GET_measure(void) {
-  server.send(
-      200, "application/json",
-      measure.toString(true, fwMode, wifiConnector.RSSI(), ag, &config));
+  String toSend = measure.toString(true, fwMode, wifiConnector.RSSI(), *ag, config);
+  server.send(200, "application/json", toSend);
 }
 
 void LocalServer::setFwMode(AgFirmwareMode fwMode) { this->fwMode = fwMode; }

examples/DiyProIndoorV3_3/OpenMetrics.cpp

@@ -67,50 +67,61 @@ String OpenMetrics::getPayload(void) {
 
   float _temp = utils::getInvalidTemperature();
   float _hum = utils::getInvalidHumidity();
-  int pm01 = utils::getInvalidPMS();
-  int pm25 = utils::getInvalidPMS();
-  int pm10 = utils::getInvalidPMS();
-  int pm03PCount = utils::getInvalidPMS();
+  int pm01 = utils::getInvalidPmValue();
+  int pm25 = utils::getInvalidPmValue();
+  int pm10 = utils::getInvalidPmValue();
+  int pm03PCount = utils::getInvalidPmValue();
   int atmpCompensated = utils::getInvalidTemperature();
   int ahumCompensated = utils::getInvalidHumidity();
+  int tvoc = utils::getInvalidVOC();
+  int tvoc_raw = utils::getInvalidVOC();
+  int nox = utils::getInvalidNOx();
+  int nox_raw = utils::getInvalidNOx();
 
   if (config.hasSensorSHT) {
-    _temp = measure.Temperature;
-    _hum = measure.Humidity;
+    _temp = measure.getFloat(Measurements::Temperature);
+    _hum = measure.getFloat(Measurements::Humidity);
     atmpCompensated = _temp;
     ahumCompensated = _hum;
   }
 
   if (config.hasSensorPMS1) {
-    pm01 = measure.pm01_1;
-    pm25 = measure.pm25_1;
-    pm10 = measure.pm10_1;
-    pm03PCount = measure.pm03PCount_1;
+    pm01 = measure.get(Measurements::PM01);
+    pm25 = measure.get(Measurements::PM25);
+    pm10 = measure.get(Measurements::PM10);
+    pm03PCount = measure.get(Measurements::PM03_PC);
+  }
+
+  if (config.hasSensorSGP) {
+    tvoc = measure.get(Measurements::TVOC);
+    tvoc_raw = measure.get(Measurements::TVOCRaw);
+    nox = measure.get(Measurements::NOx);
+    nox_raw = measure.get(Measurements::NOxRaw);
   }
 
   if (config.hasSensorPMS1) {
-    if (utils::isValidPMS(pm01)) {
+    if (utils::isValidPm(pm01)) {
       add_metric("pm1",
                  "PM1.0 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm01));
     }
-    if (utils::isValidPMS(pm25)) {
+    if (utils::isValidPm(pm25)) {
       add_metric("pm2d5",
                  "PM2.5 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm25));
     }
-    if (utils::isValidPMS(pm10)) {
+    if (utils::isValidPm(pm10)) {
       add_metric("pm10",
                  "PM10 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm10));
     }
-    if (utils::isValidPMS03Count(pm03PCount)) {
+    if (utils::isValidPm03Count(pm03PCount)) {
       add_metric("pm0d3",
                  "PM0.3 concentration as measured by the AirGradient PMS "
                  "sensor, in number of particules per 100 milliliters",
@@ -120,33 +131,33 @@ String OpenMetrics::getPayload(void) {
   }
 
   if (config.hasSensorSGP) {
-    if (utils::isValidVOC(measure.TVOC)) {
+    if (utils::isValidVOC(tvoc)) {
       add_metric("tvoc_index",
                  "The processed Total Volatile Organic Compounds (TVOC) index "
                  "as measured by the AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.TVOC));
+      add_metric_point("", String(tvoc));
     }
-    if (utils::isValidVOC(measure.TVOCRaw)) {
+    if (utils::isValidVOC(tvoc_raw)) {
       add_metric("tvoc_raw",
                  "The raw input value to the Total Volatile Organic Compounds "
                  "(TVOC) index as measured by the AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.TVOCRaw));
+      add_metric_point("", String(tvoc_raw));
     }
-    if (utils::isValidNOx(measure.NOx)) {
+    if (utils::isValidNOx(nox)) {
       add_metric("nox_index",
                  "The processed Nitrous Oxide (NOx) index as measured by the "
                  "AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.NOx));
+      add_metric_point("", String(nox));
     }
-    if (utils::isValidNOx(measure.NOxRaw)) {
+    if (utils::isValidNOx(nox_raw)) {
       add_metric("nox_raw",
                  "The raw input value to the Nitrous Oxide (NOx) index as "
                  "measured by the AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.NOxRaw));
+      add_metric_point("", String(nox_raw));
     }
   }
 

examples/DiyProIndoorV4_2/DiyProIndoorV4_2.ino

@@ -49,9 +49,8 @@ CC BY-SA 4.0 Attribution-ShareAlike 4.0 International License
 #define SENSOR_TVOC_UPDATE_INTERVAL 1000              /** ms */
 #define SENSOR_CO2_UPDATE_INTERVAL 4000               /** ms */
 #define SENSOR_PM_UPDATE_INTERVAL 2000                /** ms */
-#define SENSOR_TEMP_HUM_UPDATE_INTERVAL 2000          /** ms */
+#define SENSOR_TEMP_HUM_UPDATE_INTERVAL 6000          /** ms */
 #define DISPLAY_DELAY_SHOW_CONTENT_MS 2000            /** ms */
-#define FIRMWARE_CHECK_FOR_UPDATE_MS (60 * 60 * 1000) /** ms */
 
 static AirGradient ag(DIY_PRO_INDOOR_V4_2);
 static Configuration configuration(Serial);
@@ -68,9 +67,7 @@ static LocalServer localServer(Serial, openMetrics, measurements, configuration,
                                wifiConnector);
 static MqttClient mqttClient(Serial);
 
-static int pmFailCount = 0;
 static uint32_t factoryBtnPressTime = 0;
-static int getCO2FailCount = 0;
 static AgFirmwareMode fwMode = FW_MODE_I_42PS;
 
 static String fwNewVersion;
@@ -92,6 +89,8 @@ static void wdgFeedUpdate(void);
 static bool sgp41Init(void);
 static void wifiFactoryConfigure(void);
 static void mqttHandle(void);
+static int calculateMaxPeriod(int updateInterval);
+static void setMeasurementMaxPeriod();
 
 AgSchedule dispLedSchedule(DISP_UPDATE_INTERVAL, oledDisplaySchedule);
 AgSchedule configSchedule(SERVER_CONFIG_SYNC_INTERVAL,
@@ -132,6 +131,10 @@ void setup() {
 
   /** Init sensor */
   boardInit();
+  setMeasurementMaxPeriod();
+
+  // Uncomment below line to print every measurements reading update
+  // measurements.setDebug(true);
 
   /** Connecting wifi */
   bool connectToWifi = false;
@@ -232,11 +235,7 @@ void loop() {
     tvocSchedule.run();
   }
 
-  /** Auto reset watchdog timer if offline mode or postDataToAirGradient */
-  if (configuration.isOfflineMode() ||
-      (configuration.isPostDataToAirGradient() == false)) {
-    watchdogFeedSchedule.run();
-  }
+  watchdogFeedSchedule.run();
 
   /** Check for handle WiFi reconnect */
   wifiConnector.handle();
@@ -260,17 +259,16 @@ void loop() {
 }
 
 static void co2Update(void) {
+  if (!configuration.hasSensorS8) {
+    // Device don't have S8 sensor
+    return;
+  }
+
   int value = ag.s8.getCo2();
   if (utils::isValidCO2(value)) {
-    measurements.CO2 = value;
-    getCO2FailCount = 0;
-    Serial.printf("CO2 (ppm): %d\r\n", measurements.CO2);
+    measurements.update(Measurements::CO2, value);
   } else {
-    getCO2FailCount++;
-    Serial.printf("Get CO2 failed: %d\r\n", getCO2FailCount);
-    if (getCO2FailCount >= 3) {
-      measurements.CO2 = utils::getInvalidCO2();
-    }
+    measurements.update(Measurements::CO2, utils::getInvalidCO2());
   }
 }
 
@@ -292,10 +290,17 @@ static void mdnsInit(void) {
 }
 
 static void initMqtt(void) {
-  if (mqttClient.begin(configuration.getMqttBrokerUri())) {
-    Serial.println("Setup connect to MQTT broker successful");
+  String mqttUri = configuration.getMqttBrokerUri();
+  if (mqttUri.isEmpty()) {
+    Serial.println(
+        "MQTT is not configured, skipping initialization of MQTT client");
+    return;
+  }
+
+  if (mqttClient.begin(mqttUri)) {
+    Serial.println("Successfully connected to MQTT broker");
   } else {
-    Serial.println("setup Connect to MQTT broker failed");
+    Serial.println("Connection to MQTT broker failed");
   }
 }
 
@@ -328,8 +333,6 @@ static void factoryConfigReset(void) {
             // }
 
             /** Reset WIFI */
-            // WiFi.enableSTA(true); // Incase offline mode
-            // WiFi.disconnect(true, true);
             wifiConnector.reset();
 
             /** Reset local config */
@@ -358,9 +361,7 @@ static void factoryConfigReset(void) {
 
 static void wdgFeedUpdate(void) {
   ag.watchdog.reset();
-  Serial.println();
-  Serial.println("Offline mode or isPostToAirGradient = false: watchdog reset");
-  Serial.println();
+  Serial.println("External watchdog feed!");
 }
 
 static bool sgp41Init(void) {
@@ -395,8 +396,7 @@ static void mqttHandle(void) {
   }
 
   if (mqttClient.isConnected()) {
-    String payload = measurements.toString(true, fwMode, wifiConnector.RSSI(),
-                                           &ag, &configuration);
+    String payload = measurements.toString(true, fwMode, wifiConnector.RSSI(), ag, configuration);
     String topic = "airgradient/readings/" + ag.deviceId();
     if (mqttClient.publish(topic.c_str(), payload.c_str(), payload.length())) {
       Serial.println("MQTT sync success");
@@ -585,84 +585,98 @@ static void oledDisplaySchedule(void) {
 }
 
 static void updateTvoc(void) {
-  measurements.TVOC = ag.sgp41.getTvocIndex();
-  measurements.TVOCRaw = ag.sgp41.getTvocRaw();
-  measurements.NOx = ag.sgp41.getNoxIndex();
-  measurements.NOxRaw = ag.sgp41.getNoxRaw();
+  if (!configuration.hasSensorSGP) {
+    return;
+  }
 
-  Serial.println();
-  Serial.printf("TVOC index: %d\r\n", measurements.TVOC);
-  Serial.printf("TVOC raw: %d\r\n", measurements.TVOCRaw);
-  Serial.printf("NOx index: %d\r\n", measurements.NOx);
-  Serial.printf("NOx raw: %d\r\n", measurements.NOxRaw);
+  measurements.update(Measurements::TVOC, ag.sgp41.getTvocIndex());
+  measurements.update(Measurements::TVOCRaw, ag.sgp41.getTvocRaw());
+  measurements.update(Measurements::NOx, ag.sgp41.getNoxIndex());
+  measurements.update(Measurements::NOxRaw, ag.sgp41.getNoxRaw());
 }
 
 static void updatePm(void) {
-  if (ag.pms5003.isFailed() == false) {
-    measurements.pm01_1 = ag.pms5003.getPm01Ae();
-    measurements.pm25_1 = ag.pms5003.getPm25Ae();
-    measurements.pm10_1 = ag.pms5003.getPm10Ae();
-    measurements.pm03PCount_1 = ag.pms5003.getPm03ParticleCount();
-
-    Serial.println();
-    Serial.printf("PM1 ug/m3: %d\r\n", measurements.pm01_1);
-    Serial.printf("PM2.5 ug/m3: %d\r\n", measurements.pm25_1);
-    Serial.printf("PM10 ug/m3: %d\r\n", measurements.pm10_1);
-    Serial.printf("PM0.3 Count: %d\r\n", measurements.pm03PCount_1);
-    pmFailCount = 0;
+  if (ag.pms5003.connected()) {
+    measurements.update(Measurements::PM01, ag.pms5003.getPm01Ae());
+    measurements.update(Measurements::PM25, ag.pms5003.getPm25Ae());
+    measurements.update(Measurements::PM10, ag.pms5003.getPm10Ae());
+    measurements.update(Measurements::PM03_PC, ag.pms5003.getPm03ParticleCount());
   } else {
-    pmFailCount++;
-    Serial.printf("PMS read failed: %d\r\n", pmFailCount);
-    if (pmFailCount >= 3) {
-      measurements.pm01_1 = utils::getInvalidPMS();
-      measurements.pm25_1 = utils::getInvalidPMS();
-      measurements.pm10_1 = utils::getInvalidPMS();
-      measurements.pm03PCount_1 = utils::getInvalidPMS();
-    }
+    measurements.update(Measurements::PM01, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM25, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM10, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM03_PC, utils::getInvalidPmValue());
   }
 }
 
 static void sendDataToServer(void) {
+  /** Increment bootcount when send measurements data is scheduled */
+  measurements.bootCount++;
+
   /** Ignore send data to server if postToAirGradient disabled */
   if (configuration.isPostDataToAirGradient() == false ||
       configuration.isOfflineMode()) {
     return;
   }
 
-  String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI(),
-                                          &ag, &configuration);
+  String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI(), ag, configuration);
   if (apiClient.postToServer(syncData)) {
-    ag.watchdog.reset();
     Serial.println();
     Serial.println(
         "Online mode and isPostToAirGradient = true: watchdog reset");
     Serial.println();
   }
-
-  measurements.bootCount++;
 }
 
 static void tempHumUpdate(void) {
-  delay(100);
   if (ag.sht.measure()) {
-    measurements.Temperature = ag.sht.getTemperature();
-    measurements.Humidity = ag.sht.getRelativeHumidity();
+    float temp = ag.sht.getTemperature();
+    float rhum = ag.sht.getRelativeHumidity();
 
-    Serial.printf("Temperature in C: %0.2f\r\n", measurements.Temperature);
-    Serial.printf("Relative Humidity: %d\r\n", measurements.Humidity);
-    Serial.printf("Temperature compensated in C: %0.2f\r\n",
-                  measurements.Temperature);
-    Serial.printf("Relative Humidity compensated: %d\r\n",
-                  measurements.Humidity);
+    measurements.update(Measurements::Temperature, temp);
+    measurements.update(Measurements::Humidity, rhum);
 
     // Update compensation temperature and humidity for SGP41
     if (configuration.hasSensorSGP) {
-      ag.sgp41.setCompensationTemperatureHumidity(measurements.Temperature,
-                                                  measurements.Humidity);
+      ag.sgp41.setCompensationTemperatureHumidity(temp, rhum);
     }
   } else {
+    measurements.update(Measurements::Temperature, utils::getInvalidTemperature());
+    measurements.update(Measurements::Humidity, utils::getInvalidHumidity());
     Serial.println("SHT read failed");
-    measurements.Temperature = utils::getInvalidTemperature();
-    measurements.Humidity = utils::getInvalidHumidity();
   }
 }
+
+/* Set max period for each measurement type based on sensor update interval*/
+void setMeasurementMaxPeriod() {
+  /// Max period for S8 sensors measurements
+  measurements.maxPeriod(Measurements::CO2, calculateMaxPeriod(SENSOR_CO2_UPDATE_INTERVAL));
+  /// Max period for SGP sensors measurements
+  measurements.maxPeriod(Measurements::TVOC, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::TVOCRaw, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::NOx, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::NOxRaw, calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL));
+  /// Max period for PMS sensors measurements
+  measurements.maxPeriod(Measurements::PM25, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::PM01, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::PM10, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  measurements.maxPeriod(Measurements::PM03_PC, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  // Temperature and Humidity
+  if (configuration.hasSensorSHT) {
+    /// Max period for SHT sensors measurements
+    measurements.maxPeriod(Measurements::Temperature,
+                           calculateMaxPeriod(SENSOR_TEMP_HUM_UPDATE_INTERVAL));
+    measurements.maxPeriod(Measurements::Humidity,
+                           calculateMaxPeriod(SENSOR_TEMP_HUM_UPDATE_INTERVAL));
+  } else {
+    /// Temp and hum data retrieved from PMS5003T sensor
+    measurements.maxPeriod(Measurements::Temperature,
+                           calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+    measurements.maxPeriod(Measurements::Humidity, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  }
+}
+
+int calculateMaxPeriod(int updateInterval) {
+  // 0.5 is 50% reduced interval for max period
+  return (SERVER_SYNC_INTERVAL - (SERVER_SYNC_INTERVAL * 0.5)) / updateInterval;
+}

examples/DiyProIndoorV4_2/LocalServer.cpp

@@ -53,9 +53,8 @@ void LocalServer::_GET_metrics(void) {
 }
 
 void LocalServer::_GET_measure(void) {
-  server.send(
-      200, "application/json",
-      measure.toString(true, fwMode, wifiConnector.RSSI(), ag, &config));
+  String toSend = measure.toString(true, fwMode, wifiConnector.RSSI(), *ag, config);
+  server.send(200, "application/json", toSend);
 }
 
 void LocalServer::setFwMode(AgFirmwareMode fwMode) { this->fwMode = fwMode; }

examples/DiyProIndoorV4_2/OpenMetrics.cpp

@@ -67,50 +67,61 @@ String OpenMetrics::getPayload(void) {
 
   float _temp = utils::getInvalidTemperature();
   float _hum = utils::getInvalidHumidity();
-  int pm01 = utils::getInvalidPMS();
-  int pm25 = utils::getInvalidPMS();
-  int pm10 = utils::getInvalidPMS();
-  int pm03PCount = utils::getInvalidPMS();
+  int pm01 = utils::getInvalidPmValue();
+  int pm25 = utils::getInvalidPmValue();
+  int pm10 = utils::getInvalidPmValue();
+  int pm03PCount = utils::getInvalidPmValue();
   int atmpCompensated = utils::getInvalidTemperature();
   int ahumCompensated = utils::getInvalidHumidity();
+  int tvoc = utils::getInvalidVOC();
+  int tvoc_raw = utils::getInvalidVOC();
+  int nox = utils::getInvalidNOx();
+  int nox_raw = utils::getInvalidNOx();
 
   if (config.hasSensorSHT) {
-    _temp = measure.Temperature;
-    _hum = measure.Humidity;
+    _temp = measure.getFloat(Measurements::Temperature);
+    _hum = measure.getFloat(Measurements::Humidity);
     atmpCompensated = _temp;
     ahumCompensated = _hum;
   }
 
   if (config.hasSensorPMS1) {
-    pm01 = measure.pm01_1;
-    pm25 = measure.pm25_1;
-    pm10 = measure.pm10_1;
-    pm03PCount = measure.pm03PCount_1;
+    pm01 = measure.get(Measurements::PM01);
+    pm25 = measure.get(Measurements::PM25);
+    pm10 = measure.get(Measurements::PM10);
+    pm03PCount = measure.get(Measurements::PM03_PC);
+  }
+
+  if (config.hasSensorSGP) {
+    tvoc = measure.get(Measurements::TVOC);
+    tvoc_raw = measure.get(Measurements::TVOCRaw);
+    nox = measure.get(Measurements::NOx);
+    nox_raw = measure.get(Measurements::NOxRaw);
   }
 
   if (config.hasSensorPMS1) {
-    if (utils::isValidPMS(pm01)) {
+    if (utils::isValidPm(pm01)) {
       add_metric("pm1",
                  "PM1.0 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm01));
     }
-    if (utils::isValidPMS(pm25)) {
+    if (utils::isValidPm(pm25)) {
       add_metric("pm2d5",
                  "PM2.5 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm25));
     }
-    if (utils::isValidPMS(pm10)) {
+    if (utils::isValidPm(pm10)) {
       add_metric("pm10",
                  "PM10 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm10));
     }
-    if (utils::isValidPMS03Count(pm03PCount)) {
+    if (utils::isValidPm03Count(pm03PCount)) {
       add_metric("pm0d3",
                  "PM0.3 concentration as measured by the AirGradient PMS "
                  "sensor, in number of particules per 100 milliliters",
@@ -120,33 +131,33 @@ String OpenMetrics::getPayload(void) {
   }
 
   if (config.hasSensorSGP) {
-    if (utils::isValidVOC(measure.TVOC)) {
+    if (utils::isValidVOC(tvoc)) {
       add_metric("tvoc_index",
                  "The processed Total Volatile Organic Compounds (TVOC) index "
                  "as measured by the AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.TVOC));
+      add_metric_point("", String(tvoc));
     }
-    if (utils::isValidVOC(measure.TVOCRaw)) {
+    if (utils::isValidVOC(tvoc_raw)) {
       add_metric("tvoc_raw",
                  "The raw input value to the Total Volatile Organic Compounds "
                  "(TVOC) index as measured by the AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.TVOCRaw));
+      add_metric_point("", String(tvoc_raw));
     }
-    if (utils::isValidNOx(measure.NOx)) {
+    if (utils::isValidNOx(nox)) {
       add_metric("nox_index",
                  "The processed Nitrous Oxide (NOx) index as measured by the "
                  "AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.NOx));
+      add_metric_point("", String(nox));
     }
-    if (utils::isValidNOx(measure.NOxRaw)) {
+    if (utils::isValidNOx(nox_raw)) {
       add_metric("nox_raw",
                  "The raw input value to the Nitrous Oxide (NOx) index as "
                  "measured by the AirGradient SGP sensor",
                  "gauge");
-      add_metric_point("", String(measure.NOxRaw));
+      add_metric_point("", String(nox_raw));
     }
   }
 

examples/OneOpenAir/LocalServer.cpp

@@ -64,9 +64,8 @@ void LocalServer::_GET_metrics(void) {
 }
 
 void LocalServer::_GET_measure(void) {
-  server.send(
-      200, "application/json",
-      measure.toString(true, fwMode, wifiConnector.RSSI(), ag, &config));
+  String toSend = measure.toString(true, fwMode, wifiConnector.RSSI(), *ag, config);
+  server.send(200, "application/json", toSend);
 }
 
 void LocalServer::setFwMode(AgFirmwareMode fwMode) { this->fwMode = fwMode; }

examples/OneOpenAir/OneOpenAir.ino

@@ -62,7 +62,7 @@ CC BY-SA 4.0 Attribution-ShareAlike 4.0 International License
 #define SENSOR_TVOC_UPDATE_INTERVAL 1000     /** ms */
 #define SENSOR_CO2_UPDATE_INTERVAL 4000      /** ms */
 #define SENSOR_PM_UPDATE_INTERVAL 2000       /** ms */
-#define SENSOR_TEMP_HUM_UPDATE_INTERVAL 2000 /** ms */
+#define SENSOR_TEMP_HUM_UPDATE_INTERVAL 6000 /** ms */
 #define DISPLAY_DELAY_SHOW_CONTENT_MS 2000   /** ms */
 #define FIRMWARE_CHECK_FOR_UPDATE_MS (60*60*1000)   /** ms */
 
@@ -88,9 +88,7 @@ static OtaHandler otaHandler;
 static LocalServer localServer(Serial, openMetrics, measurements, configuration,
                                wifiConnector);
 
-static int pmFailCount = 0;
 static uint32_t factoryBtnPressTime = 0;
-static int getCO2FailCount = 0;
 static AgFirmwareMode fwMode = FW_MODE_I_9PSL;
 
 static bool ledBarButtonTest = false;
@@ -99,9 +97,7 @@ static String fwNewVersion;
 static void boardInit(void);
 static void failedHandler(String msg);
 static void configurationUpdateSchedule(void);
-static void appLedHandler(void);
-static void appDispHandler(void);
-static void oledDisplayLedBarSchedule(void);
+static void updateDisplayAndLedBar(void);
 static void updateTvoc(void);
 static void updatePm(void);
 static void sendDataToServer(void);
@@ -118,8 +114,10 @@ static void firmwareCheckForUpdate(void);
 static void otaHandlerCallback(OtaState state, String mesasge);
 static void displayExecuteOta(OtaState state, String msg,
                               int processing);
+static int calculateMaxPeriod(int updateInterval);
+static void setMeasurementMaxPeriod();
 
-AgSchedule dispLedSchedule(DISP_UPDATE_INTERVAL, oledDisplayLedBarSchedule);
+AgSchedule dispLedSchedule(DISP_UPDATE_INTERVAL, updateDisplayAndLedBar);
 AgSchedule configSchedule(SERVER_CONFIG_SYNC_INTERVAL,
                           configurationUpdateSchedule);
 AgSchedule agApiPostSchedule(SERVER_SYNC_INTERVAL, sendDataToServer);
@@ -168,6 +166,10 @@ void setup() {
 
   /** Init sensor */
   boardInit();
+  setMeasurementMaxPeriod();
+
+  // Comment below line to disable debug measurement readings
+  measurements.setDebug(true);
 
   /** Connecting wifi */
   bool connectToWifi = false;
@@ -262,8 +264,8 @@ void setup() {
     oledDisplay.setBrightness(configuration.getDisplayBrightness());
   }
 
-  appLedHandler();
-  appDispHandler();
+  // Update display and led bar after finishing setup to show dashboard
+  updateDisplayAndLedBar();
 }
 
 void loop() {
@@ -289,6 +291,11 @@ void loop() {
   if (ag->isOne()) {
     if (configuration.hasSensorPMS1) {
       ag->pms5003.handle();
+      static bool pmsConnected = false;
+      if (pmsConnected != ag->pms5003.connected()) {
+        pmsConnected = ag->pms5003.connected();
+        Serial.printf("PMS sensor %s ", pmsConnected?"connected":"removed");
+      }
     }
   } else {
     if (configuration.hasSensorPMS1) {
@@ -299,11 +306,7 @@ void loop() {
     }
   }
 
-  /** Auto reset watchdog timer if offline mode or postDataToAirGradient */
-  if (configuration.isOfflineMode() ||
-      (configuration.isPostDataToAirGradient() == false)) {
-    watchdogFeedSchedule.run();
-  }
+  watchdogFeedSchedule.run();
 
   /** Check for handle WiFi reconnect */
   wifiConnector.handle();
@@ -319,17 +322,16 @@ void loop() {
 }
 
 static void co2Update(void) {
+  if (!configuration.hasSensorS8) {
+    // Device don't have S8 sensor
+    return;
+  }
+
   int value = ag->s8.getCo2();
   if (utils::isValidCO2(value)) {
-    measurements.CO2 = value;
-    getCO2FailCount = 0;
-    Serial.printf("CO2 (ppm): %d\r\n", measurements.CO2);
+    measurements.update(Measurements::CO2, value);
   } else {
-    getCO2FailCount++;
-    Serial.printf("Get CO2 failed: %d\r\n", getCO2FailCount);
-    if (getCO2FailCount >= 3) {
-      measurements.CO2 = utils::getInvalidCO2();
-    }
+    measurements.update(Measurements::CO2, utils::getInvalidCO2());
   }
 }
 
@@ -362,8 +364,8 @@ static void createMqttTask(void) {
 
           /** Send data */
           if (mqttClient.isConnected()) {
-            String payload = measurements.toString(
-                true, fwMode, wifiConnector.RSSI(), ag, &configuration);
+            String payload =
+                measurements.toString(true, fwMode, wifiConnector.RSSI(), *ag, configuration);
             String topic = "airgradient/readings/" + ag->deviceId();
 
             if (mqttClient.publish(topic.c_str(), payload.c_str(),
@@ -383,11 +385,18 @@ static void createMqttTask(void) {
 }
 
 static void initMqtt(void) {
-  if (mqttClient.begin(configuration.getMqttBrokerUri())) {
-    Serial.println("Connect to MQTT broker successful");
+  String mqttUri = configuration.getMqttBrokerUri();
+  if (mqttUri.isEmpty()) {
+    Serial.println(
+        "MQTT is not configured, skipping initialization of MQTT client");
+    return;
+  }
+
+  if (mqttClient.begin(mqttUri)) {
+    Serial.println("Successfully connected to MQTT broker");
     createMqttTask();
   } else {
-    Serial.println("Connect to MQTT broker failed");
+    Serial.println("Connection to MQTT broker failed");
   }
 }
 
@@ -424,8 +433,7 @@ static void factoryConfigReset(void) {
             }
 
             /** Reset WIFI */
-            Serial.println("Set wifi connect to 'airgradient' as default");
-            WiFi.begin("airgradient", "cleanair");
+            WiFi.disconnect(true, true);
 
             /** Reset local config */
             configuration.reset();
@@ -444,7 +452,7 @@ static void factoryConfigReset(void) {
         /** Show current content cause reset ignore */
         factoryBtnPressTime = 0;
         if (ag->isOne()) {
-          appDispHandler();
+          updateDisplayAndLedBar();
         }
       }
     }
@@ -452,7 +460,7 @@ static void factoryConfigReset(void) {
     if (factoryBtnPressTime != 0) {
       if (ag->isOne()) {
         /** Restore last display content */
-        appDispHandler();
+        updateDisplayAndLedBar();
       }
     }
     factoryBtnPressTime = 0;
@@ -461,9 +469,7 @@ static void factoryConfigReset(void) {
 
 static void wdgFeedUpdate(void) {
   ag->watchdog.reset();
-  Serial.println();
-  Serial.println("Offline mode or isPostToAirGradient = false: watchdog reset");
-  Serial.println();
+  Serial.println("External watchdog feed!");
 }
 
 static void ledBarEnabledUpdate(void) {
@@ -699,7 +705,7 @@ static void oneIndoorInit(void) {
   ledBarEnabledUpdate();
 
   /** Show message init sensor */
-  oledDisplay.setText("Sensor", "initializing...", "");
+  oledDisplay.setText("Monitor", "initializing...", "");
 
   /** Init sensor SGP41 */
   if (sgp41Init() == false) {
@@ -780,27 +786,27 @@ static void openAirInit(void) {
     }
   }
 
-  /** Try to find the PMS on other difference port with S8 */
+  /** Attempt to detect PM sensors */
   if (fwMode == FW_MODE_O_1PST) {
     bool pmInitSuccess = false;
     if (serial0Available) {
       if (ag->pms5003t_1.begin(Serial0) == false) {
         configuration.hasSensorPMS1 = false;
-        Serial.println("PMS1 sensor not found");
+        Serial.println("No PM sensor detected on Serial0");
       } else {
         serial0Available = false;
         pmInitSuccess = true;
-        Serial.println("Found PMS 1 on Serial0");
+        Serial.println("Detected PM 1 on Serial0");
       }
     }
     if (pmInitSuccess == false) {
       if (serial1Available) {
         if (ag->pms5003t_1.begin(Serial1) == false) {
           configuration.hasSensorPMS1 = false;
-          Serial.println("PMS1 sensor not found");
+          Serial.println("No PM sensor detected on Serial1");
         } else {
           serial1Available = false;
-          Serial.println("Found PMS 1 on Serial1");
+          Serial.println("Detected PM 1 on Serial1");
         }
       }
     }
@@ -808,15 +814,15 @@ static void openAirInit(void) {
   } else {
     if (ag->pms5003t_1.begin(Serial0) == false) {
       configuration.hasSensorPMS1 = false;
-      Serial.println("PMS1 sensor not found");
+      Serial.println("No PM sensor detected on Serial0");
     } else {
-      Serial.println("Found PMS 1 on Serial0");
+      Serial.println("Detected PM 1 on Serial0");
     }
     if (ag->pms5003t_2.begin(Serial1) == false) {
       configuration.hasSensorPMS2 = false;
-      Serial.println("PMS2 sensor not found");
+      Serial.println("No PM sensor detected on Serial1");
     } else {
-      Serial.println("Found PMS 2 on Serial1");
+      Serial.println("Detected PM 2 on Serial1");
     }
 
     if (fwMode == FW_MODE_O_1PP) {
@@ -940,297 +946,276 @@ static void configUpdateHandle() {
 
     stateMachine.executeLedBarTest();
   }
-
-  appDispHandler();
-  appLedHandler();
-}
-
-static void appLedHandler(void) {
-  AgStateMachineState state = AgStateMachineNormal;
-  if (configuration.isOfflineMode() == false) {
-    if (wifiConnector.isConnected() == false) {
-      state = AgStateMachineWiFiLost;
-    } else if (apiClient.isFetchConfigureFailed()) {
-      state = AgStateMachineSensorConfigFailed;
-    } else if (apiClient.isPostToServerFailed()) {
-      state = AgStateMachineServerLost;
-    }
+  else if(ag->isOpenAir()) {
+    stateMachine.executeLedBarTest();
   }
 
+  // Update display and led bar notification based on updated configuration
+  updateDisplayAndLedBar();
+}
+
+static void updateDisplayAndLedBar(void) {
+  if (factoryBtnPressTime != 0) {
+    // Do not distrub factory reset sequence countdown
+    return;
+  }
+
+  if (configuration.isOfflineMode()) {
+    // Ignore network related status when in offline mode
+    stateMachine.displayHandle(AgStateMachineNormal);
+    stateMachine.handleLeds(AgStateMachineNormal);
+    return;
+  }
+
+  AgStateMachineState state = AgStateMachineNormal;
+  if (wifiConnector.isConnected() == false) {
+    state = AgStateMachineWiFiLost;
+  } else if (apiClient.isFetchConfigureFailed()) {
+    state = AgStateMachineSensorConfigFailed;
+    if (apiClient.isNotAvailableOnDashboard()) {
+      stateMachine.displaySetAddToDashBoard();
+    } else {
+      stateMachine.displayClearAddToDashBoard();
+    }
+  } else if (apiClient.isPostToServerFailed() && configuration.isPostDataToAirGradient()) {
+    state = AgStateMachineServerLost;
+  }
+
+  stateMachine.displayHandle(state);
   stateMachine.handleLeds(state);
 }
 
-static void appDispHandler(void) {
-  if (ag->isOne()) {
-    AgStateMachineState state = AgStateMachineNormal;
-
-    /** Only show display status on online mode. */
-    if (configuration.isOfflineMode() == false) {
-      if (wifiConnector.isConnected() == false) {
-        state = AgStateMachineWiFiLost;
-      } else if (apiClient.isFetchConfigureFailed()) {
-        state = AgStateMachineSensorConfigFailed;
-        if (apiClient.isNotAvailableOnDashboard()) {
-          stateMachine.displaySetAddToDashBoard();
-        } else {
-          stateMachine.displayClearAddToDashBoard();
-        }
-      } else if (apiClient.isPostToServerFailed()) {
-        state = AgStateMachineServerLost;
-      }
-    }
-    stateMachine.displayHandle(state);
-  }
-}
-
-static void oledDisplayLedBarSchedule(void) {
-  if (ag->isOne()) {
-    if (factoryBtnPressTime == 0) {
-      appDispHandler();
-    }
-  }
-  appLedHandler();
-}
-
 static void updateTvoc(void) {
-  measurements.TVOC = ag->sgp41.getTvocIndex();
-  measurements.TVOCRaw = ag->sgp41.getTvocRaw();
-  measurements.NOx = ag->sgp41.getNoxIndex();
-  measurements.NOxRaw = ag->sgp41.getNoxRaw();
+  if (!configuration.hasSensorSGP) {
+    return;
+  }
 
-  Serial.println();
-  Serial.printf("TVOC index: %d\r\n", measurements.TVOC);
-  Serial.printf("TVOC raw: %d\r\n", measurements.TVOCRaw);
-  Serial.printf("NOx index: %d\r\n", measurements.NOx);
-  Serial.printf("NOx raw: %d\r\n", measurements.NOxRaw);
+  measurements.update(Measurements::TVOC, ag->sgp41.getTvocIndex());
+  measurements.update(Measurements::TVOCRaw, ag->sgp41.getTvocRaw());
+  measurements.update(Measurements::NOx, ag->sgp41.getNoxIndex());
+  measurements.update(Measurements::NOxRaw, ag->sgp41.getNoxRaw());
+}
+
+static void updatePMS5003() {
+  if (ag->pms5003.connected()) {
+    measurements.update(Measurements::PM01, ag->pms5003.getPm01Ae());
+    measurements.update(Measurements::PM25, ag->pms5003.getPm25Ae());
+    measurements.update(Measurements::PM10, ag->pms5003.getPm10Ae());
+    measurements.update(Measurements::PM01_SP, ag->pms5003.getPm01Sp());
+    measurements.update(Measurements::PM25_SP, ag->pms5003.getPm25Sp());
+    measurements.update(Measurements::PM10_SP, ag->pms5003.getPm10Sp());
+    measurements.update(Measurements::PM03_PC, ag->pms5003.getPm03ParticleCount());
+    measurements.update(Measurements::PM05_PC, ag->pms5003.getPm05ParticleCount());
+    measurements.update(Measurements::PM01_PC, ag->pms5003.getPm01ParticleCount());
+    measurements.update(Measurements::PM25_PC, ag->pms5003.getPm25ParticleCount());
+    measurements.update(Measurements::PM5_PC, ag->pms5003.getPm5ParticleCount());
+    measurements.update(Measurements::PM10_PC, ag->pms5003.getPm10ParticleCount());
+  } else {
+    measurements.update(Measurements::PM01, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM25, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM10, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM01_SP, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM25_SP, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM10_SP, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM03_PC, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM05_PC, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM01_PC, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM25_PC, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM5_PC, utils::getInvalidPmValue());
+    measurements.update(Measurements::PM10_PC, utils::getInvalidPmValue());
+  }
 }
 
 static void updatePm(void) {
   if (ag->isOne()) {
-    if (ag->pms5003.isFailed() == false) {
-      measurements.pm01_1 = ag->pms5003.getPm01Ae();
-      measurements.pm25_1 = ag->pms5003.getPm25Ae();
-      measurements.pm10_1 = ag->pms5003.getPm10Ae();
-      measurements.pm03PCount_1 = ag->pms5003.getPm03ParticleCount();
+    updatePMS5003();
+    return;
+  }
 
-      Serial.println();
-      Serial.printf("PM1 ug/m3: %d\r\n", measurements.pm01_1);
-      Serial.printf("PM2.5 ug/m3: %d\r\n", measurements.pm25_1);
-      Serial.printf("PM10 ug/m3: %d\r\n", measurements.pm10_1);
-      Serial.printf("PM0.3 Count: %d\r\n", measurements.pm03PCount_1);
-      pmFailCount = 0;
+  // Open Air Monitor series, can have two PMS5003T sensor
+  bool newPMS1Value = false;
+  bool newPMS2Value = false;
+
+  // Read PMS channel 1 if available
+  int channel = 1;
+  if (configuration.hasSensorPMS1) {
+    if (ag->pms5003t_1.connected()) {
+      measurements.update(Measurements::PM01, ag->pms5003t_1.getPm01Ae(), channel);
+      measurements.update(Measurements::PM25, ag->pms5003t_1.getPm25Ae(), channel);
+      measurements.update(Measurements::PM10, ag->pms5003t_1.getPm10Ae(), channel);
+      measurements.update(Measurements::PM01_SP, ag->pms5003t_1.getPm01Sp(), channel);
+      measurements.update(Measurements::PM25_SP, ag->pms5003t_1.getPm25Sp(), channel);
+      measurements.update(Measurements::PM10_SP, ag->pms5003t_1.getPm10Sp(), channel);
+      measurements.update(Measurements::PM03_PC, ag->pms5003t_1.getPm03ParticleCount(), channel);
+      measurements.update(Measurements::PM05_PC, ag->pms5003t_1.getPm05ParticleCount(), channel);
+      measurements.update(Measurements::PM01_PC, ag->pms5003t_1.getPm01ParticleCount(), channel);
+      measurements.update(Measurements::PM25_PC, ag->pms5003t_1.getPm25ParticleCount(), channel);
+      measurements.update(Measurements::Temperature, ag->pms5003t_1.getTemperature(), channel);
+      measurements.update(Measurements::Humidity, ag->pms5003t_1.getRelativeHumidity(), channel);
+
+      // flag that new valid PMS value exists
+      newPMS1Value = true;
     } else {
-      pmFailCount++;
-      Serial.printf("PMS read failed: %d\r\n", pmFailCount);
-      if (pmFailCount >= 3) {
-        measurements.pm01_1 = utils::getInvalidPMS();
-        measurements.pm25_1 = utils::getInvalidPMS();
-        measurements.pm10_1 = utils::getInvalidPMS();
-        measurements.pm03PCount_1 = utils::getInvalidPMS();
-      }
+      // PMS channel 1 now is not connected, update using invalid value
+      measurements.update(Measurements::PM01, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM25, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM10, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM01_SP, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM25_SP, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM10_SP, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM03_PC, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM05_PC, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM01_PC, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM25_PC, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::Temperature, utils::getInvalidTemperature(), channel);
+      measurements.update(Measurements::Humidity, utils::getInvalidHumidity(), channel);
     }
-  } else {
-    bool pmsResult_1 = false;
-    bool pmsResult_2 = false;
-    if (configuration.hasSensorPMS1 && (ag->pms5003t_1.isFailed() == false)) {
-      measurements.pm01_1 = ag->pms5003t_1.getPm01Ae();
-      measurements.pm25_1 = ag->pms5003t_1.getPm25Ae();
-      measurements.pm10_1 = ag->pms5003t_1.getPm10Ae();
-      measurements.pm03PCount_1 = ag->pms5003t_1.getPm03ParticleCount();
-      measurements.temp_1 = ag->pms5003t_1.getTemperature();
-      measurements.hum_1 = ag->pms5003t_1.getRelativeHumidity();
+  }
 
-      pmsResult_1 = true;
+  // Read PMS channel 2 if available
+  channel = 2;
+  if (configuration.hasSensorPMS2) {
+    if (ag->pms5003t_2.connected()) {
+      measurements.update(Measurements::PM01, ag->pms5003t_2.getPm01Ae(), channel);
+      measurements.update(Measurements::PM25, ag->pms5003t_2.getPm25Ae(), channel);
+      measurements.update(Measurements::PM10, ag->pms5003t_2.getPm10Ae(), channel);
+      measurements.update(Measurements::PM01_SP, ag->pms5003t_2.getPm01Sp(), channel);
+      measurements.update(Measurements::PM25_SP, ag->pms5003t_2.getPm25Sp(), channel);
+      measurements.update(Measurements::PM10_SP, ag->pms5003t_2.getPm10Sp(), channel);
+      measurements.update(Measurements::PM03_PC, ag->pms5003t_2.getPm03ParticleCount(), channel);
+      measurements.update(Measurements::PM05_PC, ag->pms5003t_2.getPm05ParticleCount(), channel);
+      measurements.update(Measurements::PM01_PC, ag->pms5003t_2.getPm01ParticleCount(), channel);
+      measurements.update(Measurements::PM25_PC, ag->pms5003t_2.getPm25ParticleCount(), channel);
+      measurements.update(Measurements::Temperature, ag->pms5003t_2.getTemperature(), channel);
+      measurements.update(Measurements::Humidity, ag->pms5003t_2.getRelativeHumidity(), channel);
 
-      Serial.println();
-      Serial.printf("[1] PM1 ug/m3: %d\r\n", measurements.pm01_1);
-      Serial.printf("[1] PM2.5 ug/m3: %d\r\n", measurements.pm25_1);
-      Serial.printf("[1] PM10 ug/m3: %d\r\n", measurements.pm10_1);
-      Serial.printf("[1] PM3.0 Count: %d\r\n", measurements.pm03PCount_1);
-      Serial.printf("[1] Temperature in C: %0.2f\r\n", measurements.temp_1);
-      Serial.printf("[1] Relative Humidity: %d\r\n", measurements.hum_1);
-      Serial.printf("[1] Temperature compensated in C: %0.2f\r\n",
-                    ag->pms5003t_1.temperatureCompensated(measurements.temp_1));
-      Serial.printf("[1] Relative Humidity compensated: %f\r\n",
-                    ag->pms5003t_1.humidityCompensated(measurements.hum_1));
+      // flag that new valid PMS value exists
+      newPMS2Value = true;
     } else {
-      measurements.pm01_1 = utils::getInvalidPMS();
-      measurements.pm25_1 = utils::getInvalidPMS();
-      measurements.pm10_1 = utils::getInvalidPMS();
-      measurements.pm03PCount_1 = utils::getInvalidPMS();
-      measurements.temp_1 = utils::getInvalidTemperature();
-      measurements.hum_1 = utils::getInvalidHumidity();
+      // PMS channel 2 now is not connected, update using invalid value
+      measurements.update(Measurements::PM01, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM25, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM10, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM01_SP, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM25_SP, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM10_SP, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM03_PC, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM05_PC, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM01_PC, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::PM25_PC, utils::getInvalidPmValue(), channel);
+      measurements.update(Measurements::Temperature, utils::getInvalidTemperature(), channel);
+      measurements.update(Measurements::Humidity, utils::getInvalidHumidity(), channel);
     }
+  }
 
-    if (configuration.hasSensorPMS2 && (ag->pms5003t_2.isFailed() == false)) {
-      measurements.pm01_2 = ag->pms5003t_2.getPm01Ae();
-      measurements.pm25_2 = ag->pms5003t_2.getPm25Ae();
-      measurements.pm10_2 = ag->pms5003t_2.getPm10Ae();
-      measurements.pm03PCount_2 = ag->pms5003t_2.getPm03ParticleCount();
-      measurements.temp_2 = ag->pms5003t_2.getTemperature();
-      measurements.hum_2 = ag->pms5003t_2.getRelativeHumidity();
-
-      pmsResult_2 = true;
-
-      Serial.println();
-      Serial.printf("[2] PM1 ug/m3: %d\r\n", measurements.pm01_2);
-      Serial.printf("[2] PM2.5 ug/m3: %d\r\n", measurements.pm25_2);
-      Serial.printf("[2] PM10 ug/m3: %d\r\n", measurements.pm10_2);
-      Serial.printf("[2] PM3.0 Count: %d\r\n", measurements.pm03PCount_2);
-      Serial.printf("[2] Temperature in C: %0.2f\r\n", measurements.temp_2);
-      Serial.printf("[2] Relative Humidity: %d\r\n", measurements.hum_2);
-      Serial.printf("[2] Temperature compensated in C: %0.2f\r\n",
-                    ag->pms5003t_1.temperatureCompensated(measurements.temp_2));
-      Serial.printf("[2] Relative Humidity compensated: %d\r\n",
-                    ag->pms5003t_1.humidityCompensated(measurements.hum_2));
+  if (configuration.hasSensorSGP) {
+    float temp, hum;
+    if (newPMS1Value && newPMS2Value) {
+      // Both PMS has new valid value
+      temp = (measurements.getFloat(Measurements::Temperature, 1) +
+              measurements.getFloat(Measurements::Temperature, 2)) /
+             2.0f;
+      hum = (measurements.getFloat(Measurements::Humidity, 1) +
+             measurements.getFloat(Measurements::Humidity, 2)) /
+            2.0f;
+    } else if (newPMS1Value) {
+      // Only PMS1 has new valid value
+      temp = measurements.getFloat(Measurements::Temperature, 1);
+      hum = measurements.getFloat(Measurements::Humidity, 1);
     } else {
-      measurements.pm01_2 = utils::getInvalidPMS();
-      measurements.pm25_2 = utils::getInvalidPMS();
-      measurements.pm10_2 = utils::getInvalidPMS();
-      measurements.pm03PCount_2 = utils::getInvalidPMS();
-      measurements.temp_2 = utils::getInvalidTemperature();
-      measurements.hum_2 = utils::getInvalidHumidity();
+      // Only PMS2 has new valid value
+      temp = measurements.getFloat(Measurements::Temperature, 2);
+      hum = measurements.getFloat(Measurements::Humidity, 2);
     }
 
-    if (configuration.hasSensorPMS1 && configuration.hasSensorPMS2 &&
-        pmsResult_1 && pmsResult_2) {
-      /** Get total of PMS1*/
-      measurements.pm1Value01 = measurements.pm1Value01 + measurements.pm01_1;
-      measurements.pm1Value25 = measurements.pm1Value25 + measurements.pm25_1;
-      measurements.pm1Value10 = measurements.pm1Value10 + measurements.pm10_1;
-      measurements.pm1PCount =
-          measurements.pm1PCount + measurements.pm03PCount_1;
-      measurements.pm1temp = measurements.pm1temp + measurements.temp_1;
-      measurements.pm1hum = measurements.pm1hum + measurements.hum_1;
-
-      /** Get total of PMS2 */
-      measurements.pm2Value01 = measurements.pm2Value01 + measurements.pm01_2;
-      measurements.pm2Value25 = measurements.pm2Value25 + measurements.pm25_2;
-      measurements.pm2Value10 = measurements.pm2Value10 + measurements.pm10_2;
-      measurements.pm2PCount =
-          measurements.pm2PCount + measurements.pm03PCount_2;
-      measurements.pm2temp = measurements.pm2temp + measurements.temp_2;
-      measurements.pm2hum = measurements.pm2hum + measurements.hum_2;
-
-      measurements.countPosition++;
-
-      /** Get average */
-      if (measurements.countPosition == measurements.targetCount) {
-        measurements.pm01_1 =
-            measurements.pm1Value01 / measurements.targetCount;
-        measurements.pm25_1 =
-            measurements.pm1Value25 / measurements.targetCount;
-        measurements.pm10_1 =
-            measurements.pm1Value10 / measurements.targetCount;
-        measurements.pm03PCount_1 =
-            measurements.pm1PCount / measurements.targetCount;
-        measurements.temp_1 = measurements.pm1temp / measurements.targetCount;
-        measurements.hum_1 = measurements.pm1hum / measurements.targetCount;
-
-        measurements.pm01_2 =
-            measurements.pm2Value01 / measurements.targetCount;
-        measurements.pm25_2 =
-            measurements.pm2Value25 / measurements.targetCount;
-        measurements.pm10_2 =
-            measurements.pm2Value10 / measurements.targetCount;
-        measurements.pm03PCount_2 =
-            measurements.pm2PCount / measurements.targetCount;
-        measurements.temp_2 = measurements.pm2temp / measurements.targetCount;
-        measurements.hum_2 = measurements.pm2hum / measurements.targetCount;
-
-        measurements.countPosition = 0;
-
-        measurements.pm1Value01 = 0;
-        measurements.pm1Value25 = 0;
-        measurements.pm1Value10 = 0;
-        measurements.pm1PCount = 0;
-        measurements.pm1temp = 0;
-        measurements.pm1hum = 0;
-        measurements.pm2Value01 = 0;
-        measurements.pm2Value25 = 0;
-        measurements.pm2Value10 = 0;
-        measurements.pm2PCount = 0;
-        measurements.pm2temp = 0;
-        measurements.pm2hum = 0;
-      }
-    }
-
-    if (pmsResult_1 && pmsResult_2) {
-      measurements.Temperature =
-          (measurements.temp_1 + measurements.temp_2) / 2;
-      measurements.Humidity = (measurements.hum_1 + measurements.hum_2) / 2;
-    } else {
-      if (pmsResult_1) {
-        measurements.Temperature = measurements.temp_1;
-        measurements.Humidity = measurements.hum_1;
-      }
-      if (pmsResult_2) {
-        measurements.Temperature = measurements.temp_2;
-        measurements.Humidity = measurements.hum_2;
-      }
-    }
-
-    if (configuration.hasSensorSGP) {
-      float temp;
-      float hum;
-      if (pmsResult_1 && pmsResult_2) {
-        temp = (measurements.temp_1 + measurements.temp_2) / 2.0f;
-        hum = (measurements.hum_1 + measurements.hum_2) / 2.0f;
-      } else {
-        if (pmsResult_1) {
-          temp = measurements.temp_1;
-          hum = measurements.hum_1;
-        }
-        if (pmsResult_2) {
-          temp = measurements.temp_2;
-          hum = measurements.hum_2;
-        }
-      }
-      ag->sgp41.setCompensationTemperatureHumidity(temp, hum);
-    }
+    // Update compensation temperature and humidity for SGP41
+    ag->sgp41.setCompensationTemperatureHumidity(temp, hum);
   }
 }
 
 static void sendDataToServer(void) {
+  /** Increment bootcount when send measurements data is scheduled */
+  measurements.bootCount++;
+
   /** Ignore send data to server if postToAirGradient disabled */
   if (configuration.isPostDataToAirGradient() == false || configuration.isOfflineMode()) {
     return;
   }
 
-  String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI(),
-                                          ag, &configuration);
+  String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI(), *ag, configuration);
   if (apiClient.postToServer(syncData)) {
-    ag->watchdog.reset();
     Serial.println();
     Serial.println(
         "Online mode and isPostToAirGradient = true: watchdog reset");
     Serial.println();
   }
-
-  measurements.bootCount++;
 }
 
 static void tempHumUpdate(void) {
   delay(100);
   if (ag->sht.measure()) {
-    measurements.Temperature = ag->sht.getTemperature();
-    measurements.Humidity = ag->sht.getRelativeHumidity();
+    float temp = ag->sht.getTemperature();
+    float rhum = ag->sht.getRelativeHumidity();
 
-    Serial.printf("Temperature in C: %0.2f\r\n", measurements.Temperature);
-    Serial.printf("Relative Humidity: %d\r\n", measurements.Humidity);
-    Serial.printf("Temperature compensated in C: %0.2f\r\n",
-                  measurements.Temperature);
-    Serial.printf("Relative Humidity compensated: %d\r\n",
-                  measurements.Humidity);
+    measurements.update(Measurements::Temperature, temp);
+    measurements.update(Measurements::Humidity, rhum);
 
     // Update compensation temperature and humidity for SGP41
     if (configuration.hasSensorSGP) {
-      ag->sgp41.setCompensationTemperatureHumidity(measurements.Temperature,
-                                                   measurements.Humidity);
+      ag->sgp41.setCompensationTemperatureHumidity(temp, rhum);
     }
   } else {
-    measurements.Temperature = utils::getInvalidTemperature();
-    measurements.Humidity = utils::getInvalidHumidity();
+    measurements.update(Measurements::Temperature, utils::getInvalidTemperature());
+    measurements.update(Measurements::Humidity, utils::getInvalidHumidity());
     Serial.println("SHT read failed");
   }
 }
+
+/* Set max period for each measurement type based on sensor update interval*/
+void setMeasurementMaxPeriod() {
+  int max;
+
+  /// Max period for S8 sensors measurements
+  measurements.maxPeriod(Measurements::CO2, calculateMaxPeriod(SENSOR_CO2_UPDATE_INTERVAL));
+
+  /// Max period for SGP sensors measurements
+  max = calculateMaxPeriod(SENSOR_TVOC_UPDATE_INTERVAL);
+  measurements.maxPeriod(Measurements::TVOC, max);
+  measurements.maxPeriod(Measurements::TVOCRaw, max);
+  measurements.maxPeriod(Measurements::NOx, max);
+  measurements.maxPeriod(Measurements::NOxRaw, max);
+
+  /// Max period for PMS sensors measurements
+  max = calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL);
+  measurements.maxPeriod(Measurements::PM25, max);
+  measurements.maxPeriod(Measurements::PM01, max);
+  measurements.maxPeriod(Measurements::PM10, max);
+  measurements.maxPeriod(Measurements::PM25_SP, max);
+  measurements.maxPeriod(Measurements::PM01_SP, max);
+  measurements.maxPeriod(Measurements::PM10_SP, max);
+  measurements.maxPeriod(Measurements::PM03_PC, max);
+  measurements.maxPeriod(Measurements::PM05_PC, max);
+  measurements.maxPeriod(Measurements::PM01_PC, max);
+  measurements.maxPeriod(Measurements::PM25_PC, max);
+  measurements.maxPeriod(Measurements::PM5_PC, max);
+  measurements.maxPeriod(Measurements::PM10_PC, max);
+
+  // Temperature and Humidity
+  if (configuration.hasSensorSHT) {
+    /// Max period for SHT sensors measurements
+    measurements.maxPeriod(Measurements::Temperature,
+                           calculateMaxPeriod(SENSOR_TEMP_HUM_UPDATE_INTERVAL));
+    measurements.maxPeriod(Measurements::Humidity,
+                           calculateMaxPeriod(SENSOR_TEMP_HUM_UPDATE_INTERVAL));
+  } else {
+    /// Temp and hum data retrieved from PMS5003T sensor
+    measurements.maxPeriod(Measurements::Temperature,
+                           calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+    measurements.maxPeriod(Measurements::Humidity, calculateMaxPeriod(SENSOR_PM_UPDATE_INTERVAL));
+  }
+}
+
+int calculateMaxPeriod(int updateInterval) {
+  // 0.8 is 80% reduced interval for max period
+  return (SERVER_SYNC_INTERVAL - (SERVER_SYNC_INTERVAL * 0.8)) / updateInterval;
+}

examples/OneOpenAir/OpenMetrics.cpp

@@ -67,48 +67,53 @@ String OpenMetrics::getPayload(void) {
 
   float _temp = utils::getInvalidTemperature();
   float _hum = utils::getInvalidHumidity();
-  int pm01 = utils::getInvalidPMS();
-  int pm25 = utils::getInvalidPMS();
-  int pm10 = utils::getInvalidPMS();
-  int pm03PCount = utils::getInvalidPMS();
+  int pm01 = utils::getInvalidPmValue();
+  int pm25 = utils::getInvalidPmValue();
+  int pm10 = utils::getInvalidPmValue();
+  int pm03PCount = utils::getInvalidPmValue();
   int atmpCompensated = utils::getInvalidTemperature();
   int ahumCompensated = utils::getInvalidHumidity();
   if (config.hasSensorPMS1 && config.hasSensorPMS2) {
-    _temp = (measure.temp_1 + measure.temp_2) / 2.0f;
-    _hum = (measure.hum_1 + measure.hum_2) / 2.0f;
-    pm01 = (measure.pm01_1 + measure.pm01_2) / 2;
-    pm25 = (measure.pm25_1 + measure.pm25_2) / 2;
-    pm10 = (measure.pm10_1 + measure.pm10_2) / 2;
-    pm03PCount = (measure.pm03PCount_1 + measure.pm03PCount_2) / 2;
+    _temp = (measure.getFloat(Measurements::Temperature, 1) +
+             measure.getFloat(Measurements::Temperature, 2)) /
+            2.0f;
+    _hum = (measure.getFloat(Measurements::Humidity, 1) +
+            measure.getFloat(Measurements::Humidity, 2)) /
+           2.0f;
+    pm01 = (measure.get(Measurements::PM01, 1) + measure.get(Measurements::PM01, 2)) / 2.0f;
+    pm25 = (measure.get(Measurements::PM25, 1) + measure.get(Measurements::PM25, 2)) / 2.0f;
+    pm10 = (measure.get(Measurements::PM10, 1) + measure.get(Measurements::PM10, 2)) / 2.0f;
+    pm03PCount =
+        (measure.get(Measurements::PM03_PC, 1) + measure.get(Measurements::PM03_PC, 2)) / 2.0f;
   } else {
     if (ag->isOne()) {
       if (config.hasSensorSHT) {
-        _temp = measure.Temperature;
-        _hum = measure.Humidity;
+        _temp = measure.getFloat(Measurements::Temperature);
+        _hum = measure.getFloat(Measurements::Humidity);
       }
 
       if (config.hasSensorPMS1) {
-        pm01 = measure.pm01_1;
-        pm25 = measure.pm25_1;
-        pm10 = measure.pm10_1;
-        pm03PCount = measure.pm03PCount_1;
+        pm01 = measure.get(Measurements::PM01);
+        pm25 = measure.get(Measurements::PM25);
+        pm10 = measure.get(Measurements::PM10);
+        pm03PCount = measure.get(Measurements::PM03_PC);
       }
     } else {
       if (config.hasSensorPMS1) {
-        _temp = measure.temp_1;
-        _hum = measure.hum_1;
-        pm01 = measure.pm01_1;
-        pm25 = measure.pm25_1;
-        pm10 = measure.pm10_1;
-        pm03PCount = measure.pm03PCount_1;
+        _temp = measure.getFloat(Measurements::Temperature, 1);
+        _hum = measure.getFloat(Measurements::Humidity, 1);
+        pm01 = measure.get(Measurements::PM01, 1);
+        pm25 = measure.get(Measurements::PM25, 1);
+        pm10 = measure.get(Measurements::PM10, 1);
+        pm03PCount = measure.get(Measurements::PM03_PC, 1);
       }
       if (config.hasSensorPMS2) {
-        _temp = measure.temp_2;
-        _hum = measure.hum_2;
-        pm01 = measure.pm01_2;
-        pm25 = measure.pm25_2;
-        pm10 = measure.pm10_2;
-        pm03PCount = measure.pm03PCount_2;
+        _temp = measure.getFloat(Measurements::Temperature, 2);
+        _hum = measure.getFloat(Measurements::Humidity, 2);
+        pm01 = measure.get(Measurements::PM01, 2);
+        pm25 = measure.get(Measurements::PM25, 2);
+        pm10 = measure.get(Measurements::PM10, 2);
+        pm03PCount = measure.get(Measurements::PM03_PC, 2);
       }
     }
   }
@@ -118,33 +123,33 @@ String OpenMetrics::getPayload(void) {
     atmpCompensated = _temp;
     ahumCompensated = _hum;
   } else {
-    atmpCompensated = ag->pms5003t_1.temperatureCompensated(_temp);
-    ahumCompensated = ag->pms5003t_1.humidityCompensated(_hum);
+    atmpCompensated = ag->pms5003t_1.compensateTemp(_temp);
+    ahumCompensated = ag->pms5003t_1.compensateHum(_hum);
   }
 
   if (config.hasSensorPMS1 || config.hasSensorPMS2) {
-    if (utils::isValidPMS(pm01)) {
+    if (utils::isValidPm(pm01)) {
       add_metric("pm1",
                  "PM1.0 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm01));
     }
-    if (utils::isValidPMS(pm25)) {
+    if (utils::isValidPm(pm25)) {
       add_metric("pm2d5",
                  "PM2.5 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm25));
     }
-    if (utils::isValidPMS(pm10)) {
+    if (utils::isValidPm(pm10)) {
       add_metric("pm10",
                  "PM10 concentration as measured by the AirGradient PMS "
                  "sensor, in micrograms per cubic meter",
                  "gauge", "ugm3");
       add_metric_point("", String(pm10));
     }
-    if (utils::isValidPMS03Count(pm03PCount)) {
+    if (utils::isValidPm03Count(pm03PCount)) {
       add_metric("pm0d3",
                  "PM0.3 concentration as measured by the AirGradient PMS "
                  "sensor, in number of particules per 100 milliliters",

examples/TestPM/TestPM.ino

@@ -44,7 +44,7 @@ void loop() {
   if (ms >= 5000) {
     lastRead = millis();
 #ifdef ESP8266
-    if (ag.pms5003.isFailed() == false) {
+    if (ag.pms5003.connected()) {
       PM2 = ag.pms5003.getPm25Ae();
       Serial.printf("PM2.5 in ug/m3: %d\r\n", PM2);
       Serial.printf("PM2.5 in US AQI: %d\r\n",
@@ -54,12 +54,12 @@ void loop() {
     }
 #else
     if (ag.getBoardType() == OPEN_AIR_OUTDOOR) {
-      if (ag.pms5003t_1.isFailed() == false) {
+      if (ag.pms5003t_1.connected()) {
         PM2 = ag.pms5003t_1.getPm25Ae();
         readResul = true;
       }
     } else {
-      if (ag.pms5003.isFailed() == false) {
+      if (ag.pms5003.connected()) {
         PM2 = ag.pms5003.getPm25Ae();
         readResul = true;
       }

library.properties

@@ -1,5 +1,5 @@
 name=AirGradient Air Quality Sensor
-version=3.1.5
+version=3.1.12
 author=AirGradient <support@airgradient.com>
 maintainer=AirGradient <support@airgradient.com>
 sentence=ESP32-C3 / ESP8266 library for air quality monitor measuring PM, CO2, Temperature, TVOC and Humidity with OLED display.

src/AgApiClient.cpp

@@ -58,6 +58,7 @@ bool AgApiClient::fetchServerConfiguration(void) {
   }
 #else
   HTTPClient client;
+  client.setTimeout(timeoutMs);
   if (client.begin(uri) == false) {
     getConfigFailed = true;
     return false;
@@ -113,14 +114,13 @@ bool AgApiClient::postToServer(String data) {
     return false;
   }
 
-  String uri =
-      "http://hw.airgradient.com/sensors/airgradient:" + ag->deviceId() +
-      "/measures";
+  String uri = apiRoot + "/sensors/airgradient:" + ag->deviceId() + "/measures";
   // logInfo("Post uri: " + uri);
   // logInfo("Post data: " + data);
 
   WiFiClient wifiClient;
   HTTPClient client;
+  client.setTimeout(timeoutMs);
   if (client.begin(wifiClient, uri.c_str()) == false) {
     logError("Init client failed");
     return false;
@@ -130,7 +130,7 @@ bool AgApiClient::postToServer(String data) {
   client.end();
 
   logInfo(String("POST: ") + uri);
-  logInfo(String("DATA: ") + data);
+  // logInfo(String("DATA: ") + data);
   logInfo(String("Return code: ") + String(retCode));
 
   if ((retCode == 200) || (retCode == 429)) {
@@ -190,3 +190,12 @@ bool AgApiClient::sendPing(int rssi, int bootCount) {
 String AgApiClient::getApiRoot() const { return apiRoot; }
 
 void AgApiClient::setApiRoot(const String &apiRoot) { this->apiRoot = apiRoot; }
+
+/**
+ * @brief Set http request timeout. (Default: 10s)
+ *
+ * @param timeoutMs
+ */
+void AgApiClient::setTimeout(uint16_t timeoutMs) {
+  this->timeoutMs = timeoutMs;
+}

src/AgApiClient.h

@@ -25,6 +25,7 @@ private:
   bool getConfigFailed;
   bool postToServerFailed;
   bool notAvailableOnDashboard = false; // Device not setup on Airgradient cloud dashboard.
+  uint16_t timeoutMs = 10000;           // Default set to 10s
 
 public:
   AgApiClient(Stream &stream, Configuration &config);
@@ -40,6 +41,7 @@ public:
   bool sendPing(int rssi, int bootCount);
   String getApiRoot() const;
   void setApiRoot(const String &apiRoot);
+  void setTimeout(uint16_t timeoutMs);
 };
 
 #endif /** _AG_API_CLIENT_H_ */

src/AgConfigure.cpp

@@ -1,5 +1,4 @@
 #include "AgConfigure.h"
-#include "Libraries/Arduino_JSON/src/Arduino_JSON.h"
 #if ESP32
 #include "FS.h"
 #include "SPIFFS.h"
@@ -22,6 +21,18 @@ const char *LED_BAR_MODE_NAMES[] = {
     [LedBarModeCO2] = "co2",
 };
 
+const char *PM_CORRECTION_ALGORITHM_NAMES[] = {
+    [Unknown] = "-", // This is only to pass "non-trivial designated initializers" error
+    [None] = "none",
+    [EPA_2021] = "epa_2021",
+    [SLR_PMS5003_20220802] = "slr_PMS5003_20220802",
+    [SLR_PMS5003_20220803] = "slr_PMS5003_20220803",
+    [SLR_PMS5003_20220824] = "slr_PMS5003_20220824",
+    [SLR_PMS5003_20231030] = "slr_PMS5003_20231030",
+    [SLR_PMS5003_20231218] = "slr_PMS5003_20231218",
+    [SLR_PMS5003_20240104] = "slr_PMS5003_20240104",
+};
+
 #define JSON_PROP_NAME(name) jprop_##name
 #define JSON_PROP_DEF(name) const char *JSON_PROP_NAME(name) = #name
 
@@ -41,21 +52,24 @@ JSON_PROP_DEF(displayBrightness);
 JSON_PROP_DEF(co2CalibrationRequested);
 JSON_PROP_DEF(ledBarTestRequested);
 JSON_PROP_DEF(offlineMode);
+JSON_PROP_DEF(monitorDisplayCompensatedValues);
+JSON_PROP_DEF(corrections);
 
-#define jprop_model_default                 ""
-#define jprop_country_default               "TH"
-#define jprop_pmStandard_default            getPMStandardString(false)
-#define jprop_ledBarMode_default            getLedBarModeName(LedBarMode::LedBarModeCO2)
-#define jprop_abcDays_default               8
-#define jprop_tvocLearningOffset_default    12
-#define jprop_noxLearningOffset_default     12
-#define jprop_mqttBrokerUrl_default         ""
-#define jprop_temperatureUnit_default       "c"
-#define jprop_configurationControl_default  String(CONFIGURATION_CONTROL_NAME[ConfigurationControl::ConfigurationControlBoth])
-#define jprop_postDataToAirGradient_default true
-#define jprop_ledBarBrightness_default      100
-#define jprop_displayBrightness_default     100
-#define jprop_offlineMode_default           false
+#define jprop_model_default                           ""
+#define jprop_country_default                         "TH"
+#define jprop_pmStandard_default                      getPMStandardString(false)
+#define jprop_ledBarMode_default                      getLedBarModeName(LedBarMode::LedBarModeCO2)
+#define jprop_abcDays_default                         8
+#define jprop_tvocLearningOffset_default              12
+#define jprop_noxLearningOffset_default               12
+#define jprop_mqttBrokerUrl_default                   ""
+#define jprop_temperatureUnit_default                 "c"
+#define jprop_configurationControl_default            String(CONFIGURATION_CONTROL_NAME[ConfigurationControl::ConfigurationControlBoth])
+#define jprop_postDataToAirGradient_default           true
+#define jprop_ledBarBrightness_default                100
+#define jprop_displayBrightness_default               100
+#define jprop_offlineMode_default                     false
+#define jprop_monitorDisplayCompensatedValues_default false
 
 JSONVar jconfig;
 
@@ -85,6 +99,112 @@ String Configuration::getLedBarModeName(LedBarMode mode) {
   return String("unknown");
 }
 
+PMCorrectionAlgorithm Configuration::matchPmAlgorithm(String algorithm) {
+  // Loop through all algorithm names in the PM_CORRECTION_ALGORITHM_NAMES array
+  // If the input string matches an algorithm name, return the corresponding enum value
+  // Else return Unknown
+
+  const size_t enumSize = SLR_PMS5003_20240104 + 1; // Get the actual size of the enum
+  PMCorrectionAlgorithm result = PMCorrectionAlgorithm::Unknown;
+  
+  // Loop through enum values
+  for (size_t enumVal = 0; enumVal < enumSize; enumVal++) {
+    if (algorithm == PM_CORRECTION_ALGORITHM_NAMES[enumVal]) {
+      result = static_cast<PMCorrectionAlgorithm>(enumVal);
+    }
+  }
+
+  return result;
+}
+
+bool Configuration::updatePmCorrection(JSONVar &json) {
+  if (!json.hasOwnProperty("corrections")) {
+    // TODO: need to response message?
+    Serial.println("corrections not found");
+    return false;
+  }
+
+  JSONVar corrections = json["corrections"];
+  if (!corrections.hasOwnProperty("pm02")) {
+    Serial.println("pm02 not found");
+    return false;
+  }
+
+  JSONVar pm02 = corrections["pm02"];
+  if (!pm02.hasOwnProperty("correctionAlgorithm")) {
+    Serial.println("correctionAlgorithm not found");
+    return false;
+  }
+
+  // TODO: Need to have data type check, with error message response if invalid 
+
+  // Check algorithm
+  String algorithm = pm02["correctionAlgorithm"];
+  PMCorrectionAlgorithm algo = matchPmAlgorithm(algorithm);
+  if (algo == Unknown) {
+    logInfo("Unknown algorithm");
+    return false;
+  }
+  logInfo("Correction algorithm: " + algorithm);
+
+  // If algo is None or EPA_2021, no need to check slr
+  // But first check if pmCorrection different from algo
+  if (algo == None || algo == EPA_2021) {
+    if (pmCorrection.algorithm != algo) {
+      // Deep copy corrections from root to jconfig, so it will be saved later
+      jconfig[jprop_corrections]["pm02"]["correctionAlgorithm"] = algorithm;
+      jconfig[jprop_corrections]["pm02"]["slr"] = JSON.parse("{}"); // Clear slr
+      // Update pmCorrection with new values
+      pmCorrection.algorithm = algo;
+      pmCorrection.changed = true;
+      logInfo("PM2.5 correction updated");
+      return true;
+    }
+
+    return false;
+  }
+
+  // Check if pm02 has slr object
+  if (!pm02.hasOwnProperty("slr")) {
+    Serial.println("slr not found");
+    return false;
+  }
+
+  JSONVar slr = pm02["slr"];
+
+  // Validate required slr properties exist
+  if (!slr.hasOwnProperty("intercept") || !slr.hasOwnProperty("scalingFactor") ||
+      !slr.hasOwnProperty("useEpa2021")) {
+    Serial.println("Missing required slr properties");
+    return false;
+  }
+
+  // arduino_json doesn't support float type, need to cast to double first
+  float intercept = (float)((double)slr["intercept"]);
+  float scalingFactor = (float)((double)slr["scalingFactor"]);
+
+  // Compare with current pmCorrection
+  if (pmCorrection.algorithm == algo && pmCorrection.intercept == intercept &&
+      pmCorrection.scalingFactor == scalingFactor &&
+      pmCorrection.useEPA == (bool)slr["useEpa2021"]) {
+    return false; // No changes needed
+  }
+
+  // Deep copy corrections from root to jconfig, so it will be saved later
+  jconfig[jprop_corrections] = corrections;
+
+  // Update pmCorrection with new values
+  pmCorrection.algorithm = algo;
+  pmCorrection.intercept = intercept;
+  pmCorrection.scalingFactor = scalingFactor;
+  pmCorrection.useEPA = (bool)slr["useEpa2021"];
+  pmCorrection.changed = true;
+
+  // Correction values were updated
+  logInfo("PM2.5 correction updated");
+  return true;
+}
+
 /**
  * @brief Save configure to device storage (EEPROM)
  *
@@ -160,13 +280,21 @@ void Configuration::defaultConfig(void) {
     jconfig[jprop_displayBrightness] = jprop_displayBrightness_default;
   }
   if (ag->isOne()) {
-    jconfig[jprop_ledBarMode] = jprop_ledBarBrightness_default;
+    jconfig[jprop_ledBarMode] = jprop_ledBarMode_default;
   }
   jconfig[jprop_tvocLearningOffset] = jprop_tvocLearningOffset_default;
   jconfig[jprop_noxLearningOffset] = jprop_noxLearningOffset_default;
   jconfig[jprop_abcDays] = jprop_abcDays_default;
   jconfig[jprop_model] = jprop_model_default;
   jconfig[jprop_offlineMode] = jprop_offlineMode_default;
+  jconfig[jprop_monitorDisplayCompensatedValues] = jprop_monitorDisplayCompensatedValues_default;
+
+  // PM2.5 correction
+  pmCorrection.algorithm = None;
+  pmCorrection.changed = false;
+  pmCorrection.intercept = 0;
+  pmCorrection.scalingFactor = 1;
+  pmCorrection.useEPA = false;
 
   saveConfig();
 }
@@ -226,16 +354,16 @@ bool Configuration::begin(void) {
  * @return false Failure
  */
 bool Configuration::parse(String data, bool isLocal) {
-  logInfo("Parse configure: " + data);
+  logInfo("Parsing configuration: " + data);
 
   JSONVar root = JSON.parse(data);
   failedMessage = "";
-  if (root == undefined) {
+  if (root == undefined || JSONVar::typeof_(root) != "object") {
+    logError("Parse configuration failed, JSON invalid (" + JSONVar::typeof_(root) + ")");
     failedMessage = "JSON invalid";
-    logError(failedMessage);
     return false;
   }
-  logInfo("Parse configure success");
+  logInfo("Parse configuration success");
 
   /** Is configuration changed */
   bool changed = false;
@@ -628,6 +756,27 @@ bool Configuration::parse(String data, bool isLocal) {
     }
   }
 
+  if (JSON.typeof_(root[jprop_monitorDisplayCompensatedValues]) == "boolean") {
+    bool value = root[jprop_monitorDisplayCompensatedValues];
+    bool oldValue = jconfig[jprop_monitorDisplayCompensatedValues];
+    if (value != oldValue) {
+      changed = true;
+      jconfig[jprop_monitorDisplayCompensatedValues] = value;
+
+      configLogInfo(String(jprop_monitorDisplayCompensatedValues),
+                    String(oldValue ? "true" : "false"),
+                    String(value ? "true" : "false"));
+    }
+  } else {
+    if (jsonTypeInvalid(root[jprop_monitorDisplayCompensatedValues],
+                        "boolean")) {
+      failedMessage = jsonTypeInvalidMessage(
+          String(jprop_monitorDisplayCompensatedValues), "boolean");
+      jsonInvalid();
+      return false;
+    }
+  }
+
   if (ag->getBoardType() == ONE_INDOOR ||
       ag->getBoardType() == OPEN_AIR_OUTDOOR) {
     if (JSON.typeof_(root["targetFirmware"]) == "string") {
@@ -636,20 +785,25 @@ bool Configuration::parse(String data, bool isLocal) {
       if (curVer != newVer) {
         logInfo("Detected new firmware version: " + newVer);
         otaNewFirmwareVersion = newVer;
-        udpated = true;
+        updated = true;
       } else {
         otaNewFirmwareVersion = String("");
       }
     }
   }
 
+  // Corrections
+  if (updatePmCorrection(root)) {
+    changed = true;
+  }
+
   if (changed) {
-    udpated = true;
+    updated = true;
     saveConfig();
     printConfig();
   } else {
     if (ledBarTestRequested || co2CalibrationRequested) {
-      udpated = true;
+      updated = true;
     }
   }
   return true;
@@ -836,8 +990,8 @@ String Configuration::getModel(void) {
 }
 
 bool Configuration::isUpdated(void) {
-  bool updated = this->udpated;
-  this->udpated = false;
+  bool updated = this->updated;
+  this->updated = false;
   return updated;
 }
 
@@ -1082,14 +1236,27 @@ void Configuration::toConfig(const char *buf) {
   }
 
   if (JSON.typeof_(jconfig[jprop_offlineMode]) != "boolean") {
-    isInvalid = true;
-  } else {
-    isInvalid = false;
+    changed = true;
+    jconfig[jprop_offlineMode] = jprop_offlineMode_default;
   }
-  if (isInvalid) {
-    jconfig[jprop_offlineMode] = false;
+
+  /** Validate monitorDisplayCompensatedValues */
+  if (JSON.typeof_(jconfig[jprop_monitorDisplayCompensatedValues]) !=
+      "boolean") {
+    changed = true;
+    jconfig[jprop_monitorDisplayCompensatedValues] =
+        jprop_monitorDisplayCompensatedValues_default;
   }
 
+
+  // Set default first before parsing local config
+  pmCorrection.algorithm = PMCorrectionAlgorithm::None;
+  pmCorrection.intercept = 0;
+  pmCorrection.scalingFactor = 0;
+  pmCorrection.useEPA = false;
+  // Load correction from saved config
+  updatePmCorrection(jconfig);
+
   if (changed) {
     saveConfig();
   }
@@ -1173,6 +1340,10 @@ bool Configuration::isLedBarModeChanged(void) {
   return changed;
 }
 
+bool Configuration::isMonitorDisplayCompensatedValues(void) { 
+  return jconfig[jprop_monitorDisplayCompensatedValues];
+}
+
 bool Configuration::isDisplayBrightnessChanged(void) {
   bool changed = displayBrightnessChanged;
   displayBrightnessChanged = false;
@@ -1184,3 +1355,28 @@ String Configuration::newFirmwareVersion(void) {
   otaNewFirmwareVersion = String("");
   return newFw;
 }
+
+bool Configuration::isPMCorrectionChanged(void) {
+  bool changed = pmCorrection.changed;
+  pmCorrection.changed = false;
+  return changed;
+}
+
+/**
+ * @brief Check if PM correction is enabled 
+ * 
+ * @return true if PM correction algorithm is not None, otherwise false
+ */
+bool Configuration::isPMCorrectionEnabled(void) {
+  PMCorrection pmCorrection = getPMCorrection();
+  if (pmCorrection.algorithm == PMCorrectionAlgorithm::None ||
+      pmCorrection.algorithm == PMCorrectionAlgorithm::Unknown) {
+    return false;
+  }
+
+  return true;
+}
+
+Configuration::PMCorrection Configuration::getPMCorrection(void) {
+  return pmCorrection;
+}

src/AgConfigure.h

@@ -5,12 +5,22 @@
 #include "Main/PrintLog.h"
 #include "AirGradient.h"
 #include <Arduino.h>
+#include "Libraries/Arduino_JSON/src/Arduino_JSON.h"
 
 class Configuration : public PrintLog {
+public:
+  struct PMCorrection {
+    PMCorrectionAlgorithm algorithm;
+    float intercept;
+    float scalingFactor;
+    bool useEPA; // EPA 2021
+    bool changed;
+  };
+
 private:
   bool co2CalibrationRequested;
   bool ledBarTestRequested;
-  bool udpated;
+  bool updated;
   String failedMessage;
   bool _noxLearnOffsetChanged;
   bool _tvocLearningOffsetChanged;
@@ -19,10 +29,13 @@ private:
   String otaNewFirmwareVersion;
   bool _offlineMode = false;
   bool _ledBarModeChanged = false;
+  PMCorrection pmCorrection;
 
   AirGradient* ag;
 
   String getLedBarModeName(LedBarMode mode);
+  PMCorrectionAlgorithm matchPmAlgorithm(String algorithm);
+  bool updatePmCorrection(JSONVar &json);
   void saveConfig(void);
   void loadConfig(void);
   void defaultConfig(void);
@@ -82,6 +95,10 @@ public:
   void setOfflineMode(bool offline);
   void setOfflineModeWithoutSave(bool offline);
   bool isLedBarModeChanged(void);
+  bool isMonitorDisplayCompensatedValues(void);
+  bool isPMCorrectionChanged(void);
+  bool isPMCorrectionEnabled(void);
+  PMCorrection getPMCorrection(void);
 };
 
 #endif /** _AG_CONFIG_H_ */

src/AgOledDisplay.cpp

@@ -10,40 +10,48 @@
  *
  * @param hasStatus
  */
-void OledDisplay::showTempHum(bool hasStatus) {
-  char buf[16];
-  if (utils::isValidTemperature(value.Temperature)) {
+void OledDisplay::showTempHum(bool hasStatus, char *buf, int buf_size) {
+  /** Temperature */
+  float temp = value.getAverage(Measurements::Temperature);
+  if (utils::isValidTemperature(temp)) {
+    float t = 0.0f;
+    if (config.isTemperatureUnitInF()) {
+      t = utils::degreeC_To_F(temp);
+    } else {
+      t = temp;
+    }
+
     if (config.isTemperatureUnitInF()) {
-      float tempF = (value.Temperature * 9) / 5 + 32;
       if (hasStatus) {
-        snprintf(buf, sizeof(buf), "%0.1f", tempF);
+        snprintf(buf, buf_size, "%0.1f", t);
       } else {
-        snprintf(buf, sizeof(buf), "%0.1f°F", tempF);
+        snprintf(buf, buf_size, "%0.1f°F", t);
       }
     } else {
       if (hasStatus) {
-        snprintf(buf, sizeof(buf), "%.1f", value.Temperature);
+        snprintf(buf, buf_size, "%.1f", t);
       } else {
-        snprintf(buf, sizeof(buf), "%.1f°C", value.Temperature);
+        snprintf(buf, buf_size, "%.1f°C", t);
       }
     }
-  } else {
+  } else { /** Show invalid value */
     if (config.isTemperatureUnitInF()) {
-      snprintf(buf, sizeof(buf), "-°F");
+      snprintf(buf, buf_size, "-°F");
     } else {
-      snprintf(buf, sizeof(buf), "-°C");
+      snprintf(buf, buf_size, "-°C");
     }
   }
   DISP()->drawUTF8(1, 10, buf);
 
-  /** Show humidty */
-  if (utils::isValidHumidity(value.Humidity)) {
-    snprintf(buf, sizeof(buf), "%d%%", value.Humidity);
+  /** Show humidity */
+  int rhum = round(value.getAverage(Measurements::Humidity));
+  if (utils::isValidHumidity(rhum)) {
+    snprintf(buf, buf_size, "%d%%", rhum);
   } else {
-    snprintf(buf, sizeof(buf), "-%%");
+    snprintf(buf, buf_size, "-%%");
   }
 
-  if (value.Humidity > 99) {
+  if (rhum > 99.0) {
     DISP()->drawStr(97, 10, buf);
   } else {
     DISP()->drawStr(105, 10, buf);
@@ -261,7 +269,7 @@ void OledDisplay::showDashboard(const char *status) {
     do {
       DISP()->setFont(u8g2_font_t0_16_tf);
       if ((status == NULL) || (strlen(status) == 0)) {
-        showTempHum(false);
+        showTempHum(false, strBuf, sizeof(strBuf));
       } else {
         String strStatus = "Show status: " + String(status);
         logInfo(strStatus);
@@ -272,7 +280,7 @@ void OledDisplay::showDashboard(const char *status) {
         /** Show WiFi NA*/
         if (strcmp(status, "WiFi N/A") == 0) {
           DISP()->setFont(u8g2_font_t0_12_tf);
-          showTempHum(true);
+          showTempHum(true, strBuf, sizeof(strBuf));
         }
       }
 
@@ -284,8 +292,9 @@ void OledDisplay::showDashboard(const char *status) {
       DISP()->drawUTF8(1, 27, "CO2");
 
       DISP()->setFont(u8g2_font_t0_22b_tf);
-      if (utils::isValidCO2(value.CO2)) {
-        sprintf(strBuf, "%d", value.CO2);
+      int co2 = round(value.getAverage(Measurements::CO2));
+      if (utils::isValidCO2(co2)) {
+        sprintf(strBuf, "%d", co2);
       } else {
         sprintf(strBuf, "%s", "-");
       }
@@ -304,28 +313,27 @@ void OledDisplay::showDashboard(const char *status) {
       DISP()->drawStr(55, 27, "PM2.5");
 
       /** Draw PM2.5 value */
-      int pm25 = value.pm25_1;
-      if (config.hasSensorSHT) {
-        pm25 = ag->pms5003.compensated(pm25, value.Humidity);
+      int pm25 = round(value.getAverage(Measurements::PM25));
+      if (utils::isValidPm(pm25)) {
+        if (config.hasSensorSHT && config.isPMCorrectionEnabled()) {
+          pm25 = round(value.getCorrectedPM25(*ag, config, true));
+        }
+        if (config.isPmStandardInUSAQI()) {
+          sprintf(strBuf, "%d", ag->pms5003.convertPm25ToUsAqi(pm25));
+        } else {
+          sprintf(strBuf, "%d", pm25);
+        }
+      } else { /** Show invalid value. */
+        sprintf(strBuf, "%s", "-");
       }
       DISP()->setFont(u8g2_font_t0_22b_tf);
+      DISP()->drawStr(55, 48, strBuf);
+
+      /** Draw PM2.5 unit */
+      DISP()->setFont(u8g2_font_t0_12_tf);
       if (config.isPmStandardInUSAQI()) {
-        if (utils::isValidPMS(value.pm25_1)) {
-          sprintf(strBuf, "%d", ag->pms5003.convertPm25ToUsAqi(value.pm25_1));
-        } else {
-          sprintf(strBuf, "%s", "-");
-        }
-        DISP()->drawStr(55, 48, strBuf);
-        DISP()->setFont(u8g2_font_t0_12_tf);
         DISP()->drawUTF8(55, 61, "AQI");
       } else {
-        if (utils::isValidPMS(value.pm25_1)) {
-          sprintf(strBuf, "%d", value.pm25_1);
-        } else {
-          sprintf(strBuf, "%s", "-");
-        }
-        DISP()->drawStr(55, 48, strBuf);
-        DISP()->setFont(u8g2_font_t0_12_tf);
         DISP()->drawUTF8(55, 61, "ug/m³");
       }
 
@@ -334,17 +342,19 @@ void OledDisplay::showDashboard(const char *status) {
       DISP()->drawStr(100, 27, "VOC:");
 
       /** Draw tvocIndexvalue */
-      if (utils::isValidVOC(value.TVOC)) {
-        sprintf(strBuf, "%d", value.TVOC);
+      int tvoc = round(value.getAverage(Measurements::TVOC));
+      if (utils::isValidVOC(tvoc)) {
+        sprintf(strBuf, "%d", tvoc);
       } else {
         sprintf(strBuf, "%s", "-");
       }
       DISP()->drawStr(100, 39, strBuf);
 
       /** Draw NOx label */
+      int nox = round(value.getAverage(Measurements::NOx));
       DISP()->drawStr(100, 53, "NOx:");
-      if (utils::isValidNOx(value.NOx)) {
-        sprintf(strBuf, "%d", value.NOx);
+      if (utils::isValidNOx(nox)) {
+        sprintf(strBuf, "%d", nox);
       } else {
         sprintf(strBuf, "%s", "-");
       }
@@ -354,35 +364,37 @@ void OledDisplay::showDashboard(const char *status) {
     ag->display.clear();
 
     /** Set CO2 */
-    if(utils::isValidCO2(value.CO2)) {
-      snprintf(strBuf, sizeof(strBuf), "CO2:%d", value.CO2);
+    int co2 = round(value.getAverage(Measurements::CO2));
+    if (utils::isValidCO2(co2)) {
+      snprintf(strBuf, sizeof(strBuf), "CO2:%d", co2);
     } else {
       snprintf(strBuf, sizeof(strBuf), "CO2:-");
     }
-    
+
     ag->display.setCursor(0, 0);
     ag->display.setText(strBuf);
 
     /** Set PM */
-    int pm25 = value.pm25_1;
-    if(config.hasSensorSHT) {
-      pm25 = (int)ag->pms5003.compensated(pm25, value.Humidity);
+    int pm25 = round(value.getAverage(Measurements::PM25));
+    if (config.hasSensorSHT && config.isPMCorrectionEnabled()) {
+      pm25 = round(value.getCorrectedPM25(*ag, config, true));
     }
+
     ag->display.setCursor(0, 12);
-    if (utils::isValidPMS(value.pm25_1)) {
-      snprintf(strBuf, sizeof(strBuf), "PM2.5:%d", value.pm25_1);
+    if (utils::isValidPm(pm25)) {
+      snprintf(strBuf, sizeof(strBuf), "PM2.5:%d", pm25);
     } else {
       snprintf(strBuf, sizeof(strBuf), "PM2.5:-");
     }
     ag->display.setText(strBuf);
 
     /** Set temperature and humidity */
-    if (utils::isValidTemperature(value.Temperature)) {
+    float temp = value.getAverage(Measurements::Temperature);
+    if (utils::isValidTemperature(temp)) {
       if (config.isTemperatureUnitInF()) {
-        float tempF = (value.Temperature * 9) / 5 + 32;
-        snprintf(strBuf, sizeof(strBuf), "T:%0.1f F", tempF);
+        snprintf(strBuf, sizeof(strBuf), "T:%0.1f F", utils::degreeC_To_F(temp));
       } else {
-        snprintf(strBuf, sizeof(strBuf), "T:%0.f1 C", value.Temperature);
+        snprintf(strBuf, sizeof(strBuf), "T:%0.f1 C", temp);
       }
     } else {
       if (config.isTemperatureUnitInF()) {
@@ -395,8 +407,9 @@ void OledDisplay::showDashboard(const char *status) {
     ag->display.setCursor(0, 24);
     ag->display.setText(strBuf);
 
-    if (utils::isValidHumidity(value.Humidity)) {
-      snprintf(strBuf, sizeof(strBuf), "H:%d %%", (int)value.Humidity);
+    int rhum = round(value.getAverage(Measurements::Humidity));
+    if (utils::isValidHumidity(rhum)) {
+      snprintf(strBuf, sizeof(strBuf), "H:%d %%", rhum);
     } else {
       snprintf(strBuf, sizeof(strBuf), "H:- %%");
     }
@@ -423,7 +436,17 @@ void OledDisplay::setBrightness(int percent) {
       DISP()->setContrast((127 * percent) / 100);
     }
   } else if (ag->isBasic()) {
-    ag->display.setContrast((255 * percent) / 100);
+    if (percent == 0) {
+      isDisplayOff = true;
+
+      // Clear display.
+      ag->display.clear();
+      ag->display.show();
+    }
+    else {
+      isDisplayOff = false;
+      ag->display.setContrast((255 * percent) / 100);
+    }
   }
 }
 
@@ -518,7 +541,7 @@ void OledDisplay::showRebooting(void) {
     do {
       DISP()->setFont(u8g2_font_t0_16_tf);
       // setCentralText(20, "Firmware Update");
-      setCentralText(40, "Reboot...");
+      setCentralText(40, "Rebooting...");
       // setCentralText(60, String("Retry after 24h"));
     } while (DISP()->nextPage());
   } else if (ag->isBasic()) {

src/AgOledDisplay.h

@@ -16,7 +16,7 @@ private:
   Measurements &value;
   bool isDisplayOff = false;
 
-  void showTempHum(bool hasStatus);
+  void showTempHum(bool hasStatus, char* buf, int buf_size);
   void setCentralText(int y, String text);
   void setCentralText(int y, const char *text);
 

src/AgStateMachine.cpp

@@ -1,5 +1,6 @@
 #include "AgStateMachine.h"
 
+#define LED_TEST_BLINK_DELAY  50  /** ms */
 #define LED_FAST_BLINK_DELAY 250  /** ms */
 #define LED_SLOW_BLINK_DELAY 1000 /** ms */
 #define LED_SHORT_BLINK_DELAY 500 /** ms */
@@ -12,6 +13,7 @@
 #define RGB_COLOR_Y 255, 150, 0  /** Yellow */
 #define RGB_COLOR_O 255, 40, 0  /** Orange */
 #define RGB_COLOR_P 180, 0, 255 /** Purple */
+#define RGB_COLOR_CLEAR 0, 0, 0 /** No color */
 
 /**
  * @brief Animation LED bar with color
@@ -46,47 +48,67 @@ void StateMachine::ledStatusBlinkDelay(uint32_t ms) {
 }
 
 /**
- * @brief Led bar show led color status
+ * @brief Led bar show PM or CO2 led color status
  *
+ * @return true if all led bar are used, false othwerwise 
  */
-void StateMachine::sensorhandleLeds(void) {
+bool StateMachine::sensorhandleLeds(void) {
+  int totalLedUsed = 0;
   switch (config.getLedBarMode()) {
   case LedBarMode::LedBarModeCO2:
-    co2handleLeds();
+    totalLedUsed = co2handleLeds();
     break;
   case LedBarMode::LedBarModePm:
-    pm25handleLeds();
+    totalLedUsed = pm25handleLeds();
     break;
   default:
     ag->ledBar.clear();
     break;
   }
+
+  if (totalLedUsed == ag->ledBar.getNumberOfLeds()) {
+    return true;
+  }
+
+  // Clear the rest of unused led
+  int startIndex = totalLedUsed + 1;
+  for (int i = startIndex; i <= ag->ledBar.getNumberOfLeds(); i++) {
+    ag->ledBar.setColor(RGB_COLOR_CLEAR, ag->ledBar.getNumberOfLeds() - i);
+  }
+
+  return false;
 }
 
 /**
  * @brief Show CO2 LED status
  *
+ * @return return total number of led that are used on the monitor 
  */
-void StateMachine::co2handleLeds(void) {
-  int co2Value = value.CO2;
+int StateMachine::co2handleLeds(void) {
+  int totalUsed = ag->ledBar.getNumberOfLeds();
+  int co2Value = round(value.getAverage(Measurements::CO2));
   if (co2Value <= 600) {
     /** G; 1 */
     ag->ledBar.setColor(RGB_COLOR_G, ag->ledBar.getNumberOfLeds() - 1);
+    totalUsed = 1;
   } else if (co2Value <= 800) {
     /** GG; 2 */
     ag->ledBar.setColor(RGB_COLOR_G, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_G, ag->ledBar.getNumberOfLeds() - 2);
+    totalUsed = 2;
   } else if (co2Value <= 1000) {
     /** YYY; 3 */
     ag->ledBar.setColor(RGB_COLOR_Y, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_Y, ag->ledBar.getNumberOfLeds() - 2);
     ag->ledBar.setColor(RGB_COLOR_Y, ag->ledBar.getNumberOfLeds() - 3);
+    totalUsed = 3;
   } else if (co2Value <= 1250) {
     /** OOOO; 4 */
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 2);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 3);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 4);
+    totalUsed = 4;
   } else if (co2Value <= 1500) {
     /** OOOOO; 5 */
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 1);
@@ -94,6 +116,7 @@ void StateMachine::co2handleLeds(void) {
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 3);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 4);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 5);
+    totalUsed = 5;
   } else if (co2Value <= 1750) {
     /** RRRRRR; 6 */
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 1);
@@ -102,6 +125,7 @@ void StateMachine::co2handleLeds(void) {
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 4);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 5);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 6);
+    totalUsed = 6;
   } else if (co2Value <= 2000) {
     /** RRRRRRR; 7 */
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 1);
@@ -111,6 +135,7 @@ void StateMachine::co2handleLeds(void) {
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 5);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 6);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 7);
+    totalUsed = 7;
   } else if (co2Value <= 3000) {
     /** PPPPPPPP; 8 */
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 1);
@@ -121,6 +146,7 @@ void StateMachine::co2handleLeds(void) {
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 6);
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 7);
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 8);
+    totalUsed = 8;
   } else { /** > 3000 */
     /* PRPRPRPRP; 9 */
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 1);
@@ -132,41 +158,56 @@ void StateMachine::co2handleLeds(void) {
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 7);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 8);
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 9);
+    totalUsed = 9;
   }
+
+  return totalUsed;
 }
 
 /**
  * @brief Show PM2.5 LED status
- *
+ * 
+ * @return return total number of led that are used on the monitor 
  */
-void StateMachine::pm25handleLeds(void) {
-  int pm25Value = value.pm25_1;
-  if (pm25Value < 5) {
+int StateMachine::pm25handleLeds(void) {
+  int totalUsed = ag->ledBar.getNumberOfLeds();
+
+  int pm25Value = round(value.getAverage(Measurements::PM25));
+  if (config.hasSensorSHT && config.isPMCorrectionEnabled()) {
+    pm25Value = round(value.getCorrectedPM25(*ag, config, true));
+  }
+
+  if (pm25Value <= 5) {
     /** G; 1 */
     ag->ledBar.setColor(RGB_COLOR_G, ag->ledBar.getNumberOfLeds() - 1);
-  } else if (pm25Value < 10) {
+    totalUsed = 1;
+  } else if (pm25Value <= 9) {
     /** GG; 2 */
     ag->ledBar.setColor(RGB_COLOR_G, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_G, ag->ledBar.getNumberOfLeds() - 2);
-  } else if (pm25Value < 20) {
+    totalUsed = 2;
+  } else if (pm25Value <= 20) {
     /** YYY; 3 */
     ag->ledBar.setColor(RGB_COLOR_Y, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_Y, ag->ledBar.getNumberOfLeds() - 2);
     ag->ledBar.setColor(RGB_COLOR_Y, ag->ledBar.getNumberOfLeds() - 3);
-  } else if (pm25Value < 35) {
+    totalUsed = 3;
+  } else if (pm25Value <= 35) {
     /** YYYY; 4 */
     ag->ledBar.setColor(RGB_COLOR_Y, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_Y, ag->ledBar.getNumberOfLeds() - 2);
     ag->ledBar.setColor(RGB_COLOR_Y, ag->ledBar.getNumberOfLeds() - 3);
     ag->ledBar.setColor(RGB_COLOR_Y, ag->ledBar.getNumberOfLeds() - 4);
-  } else if (pm25Value < 45) {
+    totalUsed = 4;
+  } else if (pm25Value <= 45) {
     /** OOOOO; 5 */
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 2);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 3);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 4);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 5);
-  } else if (pm25Value < 55) {
+    totalUsed = 5;
+  } else if (pm25Value <= 55) {
     /** OOOOOO; 6 */
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 2);
@@ -174,7 +215,8 @@ void StateMachine::pm25handleLeds(void) {
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 4);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 5);
     ag->ledBar.setColor(RGB_COLOR_O, ag->ledBar.getNumberOfLeds() - 6);
-  } else if (pm25Value < 100) {
+    totalUsed = 6;
+  } else if (pm25Value <= 100) {
     /** RRRRRRR; 7 */
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 2);
@@ -183,7 +225,8 @@ void StateMachine::pm25handleLeds(void) {
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 5);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 6);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 7);
-  } else if (pm25Value < 200) {
+    totalUsed = 7;
+  } else if (pm25Value <= 125) {
     /** RRRRRRRR; 8 */
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 2);
@@ -193,7 +236,8 @@ void StateMachine::pm25handleLeds(void) {
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 6);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 7);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 8);
-  } else if (pm25Value < 250) {
+    totalUsed = 8;
+  } else if (pm25Value <= 225) {
     /** PPPPPPPPP; 9 */
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 2);
@@ -204,7 +248,8 @@ void StateMachine::pm25handleLeds(void) {
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 7);
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 8);
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 9);
-  } else { /** > 250 */
+    totalUsed = 9;
+  } else { /** > 225 */
     /* PRPRPRPRP; 9 */
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 1);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 2);
@@ -215,7 +260,10 @@ void StateMachine::pm25handleLeds(void) {
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 7);
     ag->ledBar.setColor(RGB_COLOR_R, ag->ledBar.getNumberOfLeds() - 8);
     ag->ledBar.setColor(RGB_COLOR_P, ag->ledBar.getNumberOfLeds() - 9);
+    totalUsed = 9;
   }
+
+  return totalUsed;
 }
 
 void StateMachine::co2Calibration(void) {
@@ -305,42 +353,62 @@ void StateMachine::co2Calibration(void) {
 
 void StateMachine::ledBarTest(void) {
   if (config.isLedBarTestRequested()) {
-    if (config.getCountry() == "TH") {
-      uint32_t tstart = millis();
-      logInfo("Start run LED test for 2 min");
-      while (1) {
-        ledBarRunTest();
-        uint32_t ms = (uint32_t)(millis() - tstart);
-        if (ms >= (60 * 1000 * 2)) {
-          logInfo("LED test after 2 min finish");
-          break;
+    if (ag->isOne()) {
+      ag->ledBar.clear();
+      if (config.getCountry() == "TH") {
+        uint32_t tstart = millis();
+        logInfo("Start run LED test for 2 min");
+        while (1) {
+          ledBarRunTest();
+          uint32_t ms = (uint32_t)(millis() - tstart);
+          if (ms >= (60 * 1000 * 2)) {
+            logInfo("LED test after 2 min finish");
+            break;
+          }
         }
+      } else {
+        ledBarRunTest();
       }
-    } else {
+    }
+    else if(ag->isOpenAir()) {
       ledBarRunTest();
     }
   }
 }
 
-void StateMachine::ledBarPowerUpTest(void) { ledBarRunTest(); }
+void StateMachine::ledBarPowerUpTest(void) { 
+  if (ag->isOne()) {
+    ag->ledBar.clear();
+  }
+  ledBarRunTest(); 
+}
 
 void StateMachine::ledBarRunTest(void) {
-  disp.setText("LED Test", "running", ".....");
-  runLedTest('r');
-  ag->ledBar.show();
-  delay(1000);
-  runLedTest('g');
-  ag->ledBar.show();
-  delay(1000);
-  runLedTest('b');
-  ag->ledBar.show();
-  delay(1000);
-  runLedTest('w');
-  ag->ledBar.show();
-  delay(1000);
-  runLedTest('n');
-  ag->ledBar.show();
-  delay(1000);
+  if (ag->isOne()) {
+    disp.setText("LED Test", "running", ".....");
+    runLedTest('r');
+    ag->ledBar.show();
+    delay(1000);
+    runLedTest('g');
+    ag->ledBar.show();
+    delay(1000);
+    runLedTest('b');
+    ag->ledBar.show();
+    delay(1000);
+    runLedTest('w');
+    ag->ledBar.show();
+    delay(1000);
+    runLedTest('n');
+    ag->ledBar.show();
+    delay(1000);
+  } else if (ag->isOpenAir()) {
+    for (int i = 0; i < 100; i++) {
+      ag->statusLed.setOn();
+      delay(LED_TEST_BLINK_DELAY);
+      ag->statusLed.setOff();
+      delay(LED_TEST_BLINK_DELAY);
+    }
+  }
 }
 
 void StateMachine::runLedTest(char color) {
@@ -480,7 +548,7 @@ void StateMachine::displayHandle(AgStateMachineState state) {
     break;
   }
   case AgStateMachineServerLost: {
-    disp.showDashboard("Server N/A");
+    disp.showDashboard("AG Server N/A");
     break;
   }
   case AgStateMachineSensorConfigFailed: {
@@ -489,7 +557,7 @@ void StateMachine::displayHandle(AgStateMachineState state) {
       if (ms >= 5000) {
         addToDashboardTime = millis();
         if (addToDashBoardToggle) {
-          disp.showDashboard("Add to Dashboard");
+          disp.showDashboard("Add to AG Dashb.");
         } else {
           disp.showDashboard(ag->deviceId().c_str());
         }
@@ -566,15 +634,13 @@ void StateMachine::handleLeds(AgStateMachineState state) {
   }
 
   ledState = state;
-  if (ag->isOne()) {
-    ag->ledBar.clear(); // Set all LED OFF
-  }
   switch (state) {
   case AgStateMachineWiFiManagerMode: {
     /** In WiFi Manager Mode */
     /** Turn LED OFF */
     /** Turn middle LED Color */
     if (ag->isOne()) {
+      ag->ledBar.clear();
       ag->ledBar.setColor(0, 0, 255, ag->ledBar.getNumberOfLeds() / 2);
     } else {
       ag->statusLed.setToggle();
@@ -584,6 +650,7 @@ void StateMachine::handleLeds(AgStateMachineState state) {
   case AgStateMachineWiFiManagerPortalActive: {
     /** WiFi Manager has connected to mobile phone */
     if (ag->isOne()) {
+      ag->ledBar.clear();
       ag->ledBar.setColor(0, 0, 255);
     } else {
       ag->statusLed.setOn();
@@ -594,6 +661,7 @@ void StateMachine::handleLeds(AgStateMachineState state) {
     /** after SSID and PW entered and OK clicked, connection to WiFI network is
      * attempted */
     if (ag->isOne()) {
+      ag->ledBar.clear();
       ledBarSingleLedAnimation(255, 255, 255);
     } else {
       ag->statusLed.setOff();
@@ -603,6 +671,7 @@ void StateMachine::handleLeds(AgStateMachineState state) {
   case AgStateMachineWiFiManagerStaConnected: {
     /** Connecting to WiFi worked */
     if (ag->isOne()) {
+      ag->ledBar.clear();
       ag->ledBar.setColor(255, 255, 255);
     } else {
       ag->statusLed.setOff();
@@ -612,6 +681,7 @@ void StateMachine::handleLeds(AgStateMachineState state) {
   case AgStateMachineWiFiOkServerConnecting: {
     /** once connected to WiFi an attempt to reach the server is performed */
     if (ag->isOne()) {
+      ag->ledBar.clear();
       ledBarSingleLedAnimation(0, 255, 0);
     } else {
       ag->statusLed.setOff();
@@ -621,6 +691,7 @@ void StateMachine::handleLeds(AgStateMachineState state) {
   case AgStateMachineWiFiOkServerConnected: {
     /** Server is reachable, all fine */
     if (ag->isOne()) {
+      ag->ledBar.clear();
       ag->ledBar.setColor(0, 255, 0);
     } else {
       ag->statusLed.setOff();
@@ -637,6 +708,7 @@ void StateMachine::handleLeds(AgStateMachineState state) {
   case AgStateMachineWiFiManagerConnectFailed: {
     /** Cannot connect to WiFi (e.g. wrong password, WPA Enterprise etc.) */
     if (ag->isOne()) {
+      ag->ledBar.clear();
       ag->ledBar.setColor(255, 0, 0);
     } else {
       ag->statusLed.setOff();
@@ -655,6 +727,7 @@ void StateMachine::handleLeds(AgStateMachineState state) {
     /** Connected to WiFi but server not reachable, e.g. firewall block/
      * whitelisting needed etc. */
     if (ag->isOne()) {
+      ag->ledBar.clear();
       ag->ledBar.setColor(233, 183, 54); /** orange */
     } else {
       ag->statusLed.setOff();
@@ -671,6 +744,7 @@ void StateMachine::handleLeds(AgStateMachineState state) {
   case AgStateMachineWiFiOkServerOkSensorConfigFailed: {
     /** Server reachable but sensor not configured correctly */
     if (ag->isOne()) {
+      ag->ledBar.clear();
       ag->ledBar.setColor(139, 24, 248); /** violet */
     } else {
       ag->statusLed.setOff();
@@ -688,11 +762,10 @@ void StateMachine::handleLeds(AgStateMachineState state) {
     /** Connection to WiFi network failed credentials incorrect encryption not
      * supported etc. */
     if (ag->isOne()) {
-      /** WIFI failed status LED color */
-      ag->ledBar.setColor(255, 0, 0, 0);
-      /** Show CO2 or PM color status */
-      // sensorLedColorHandler();
-      sensorhandleLeds();
+      bool allUsed = sensorhandleLeds();
+      if (allUsed == false) {
+        ag->ledBar.setColor(255, 0, 0, 0);
+      }
     } else {
       ag->statusLed.setOff();
     }
@@ -702,11 +775,10 @@ void StateMachine::handleLeds(AgStateMachineState state) {
     /** Connected to WiFi network but the server cannot be reached through the
      * internet, e.g. blocked by firewall */
     if (ag->isOne()) {
-      ag->ledBar.setColor(233, 183, 54, 0);
-
-      /** Show CO2 or PM color status */
-      sensorhandleLeds();
-      // sensorLedColorHandler();
+      bool allUsed = sensorhandleLeds();
+      if (allUsed == false) {
+        ag->ledBar.setColor(233, 183, 54, 0);
+      }
     } else {
       ag->statusLed.setOff();
     }
@@ -716,10 +788,10 @@ void StateMachine::handleLeds(AgStateMachineState state) {
     /** Server is reachable but there is some configuration issue to be fixed on
      * the server side */
     if (ag->isOne()) {
-      ag->ledBar.setColor(139, 24, 248, 0);
-
-      /** Show CO2 or PM color status */
-      sensorhandleLeds();
+      bool allUsed = sensorhandleLeds();
+      if (allUsed == false) {
+        ag->ledBar.setColor(139, 24, 248, 0);
+      }
     } else {
       ag->statusLed.setOff();
     }

src/AgStateMachine.h

@@ -24,9 +24,9 @@ private:
 
   void ledBarSingleLedAnimation(uint8_t r, uint8_t g, uint8_t b);
   void ledStatusBlinkDelay(uint32_t delay);
-  void sensorhandleLeds(void);
-  void co2handleLeds(void);
-  void pm25handleLeds(void);
+  bool sensorhandleLeds(void);
+  int co2handleLeds(void);
+  int pm25handleLeds(void);
   void co2Calibration(void);
   void ledBarTest(void);
   void ledBarPowerUpTest(void);

src/AgValue.h

@@ -1,76 +1,217 @@
 #ifndef _AG_VALUE_H_
 #define _AG_VALUE_H_
 
-#include <Arduino.h>
+#include "AgConfigure.h"
+#include "AirGradient.h"
 #include "App/AppDef.h"
+#include "Libraries/Arduino_JSON/src/Arduino_JSON.h"
+#include "Main/utils.h"
+#include <Arduino.h>
+#include <vector>
 
 class Measurements {
 private:
+  // Generic struct for update indication for respective value
+  struct Update {
+    int invalidCounter; // Counting on how many invalid value that are passed to update function
+    int max;            // Maximum length of the period of the moving average
+    float avg;          // Moving average value, updated every update function called
+  };
+
+  // Reading type for sensor value that outputs float
+  struct FloatValue {
+    float sumValues; // Total value from each update
+    std::vector<float> listValues; // List of update value that are kept
+    Update update;
+  };
+
+  // Reading type for sensor value that outputs integer
+  struct IntegerValue {
+    unsigned long sumValues; // Total value from each update; unsigned long to accomodate TVOx and
+                             // NOx raw data
+    std::vector<int> listValues; // List of update value that are kept
+    Update update;
+  };
+
 public:
-  Measurements() {
-    pm25_1 = -1;
-    pm01_1 = -1;
-    pm10_1 = -1;
-    pm03PCount_1 = -1;
-    temp_1 = -1001;
-    hum_1 = -1;
-
-    pm25_2 = -1;
-    pm01_2 = -1;
-    pm10_2 = -1;
-    pm03PCount_2 = -1;
-    temp_2 = -1001;
-    hum_2 = -1;
-
-    Temperature = -1001;
-    Humidity = -1;
-    CO2 = -1;
-    TVOC = -1;
-    TVOCRaw = -1;
-    NOx = -1;
-    NOxRaw = -1;
-  }
+  Measurements() {}
   ~Measurements() {}
 
-  float Temperature;
-  int Humidity;
-  int CO2;
-  int TVOC;
-  int TVOCRaw;
-  int NOx;
-  int NOxRaw;
+  // Enumeration for every AG measurements
+  enum MeasurementType {
+    Temperature,
+    Humidity,
+    CO2,
+    TVOC, // index value
+    TVOCRaw,
+    NOx, // index value
+    NOxRaw,
+    PM01,    // PM1.0 under atmospheric environment
+    PM25,    // PM2.5 under athompheric environment
+    PM10,    // PM10 under atmospheric environment
+    PM01_SP, // PM1.0 standard particle
+    PM25_SP, // PM2.5 standard particle
+    PM10_SP, // PM10 standard particle
+    PM03_PC, // Particle 0.3 count
+    PM05_PC, // Particle 0.5 count
+    PM01_PC, // Particle 1.0 count
+    PM25_PC, // Particle 2.5 count
+    PM5_PC,  // Particle 5.0 count
+    PM10_PC, // Particle 10 count
+  };
 
-  int pm25_1;
-  int pm01_1;
-  int pm10_1;
-  int pm03PCount_1;
-  float temp_1;
-  int hum_1;
+  /**
+   * @brief Set each MeasurementType maximum period length for moving average
+   *
+   * @param type the target measurement type to set
+   * @param max the maximum period length
+   */
+  void maxPeriod(MeasurementType, int max);
 
-  int pm25_2;
-  int pm01_2;
-  int pm10_2;
-  int pm03PCount_2;
-  float temp_2;
-  int hum_2;
+  /**
+   * @brief update target measurement type with new value.
+   * Each MeasurementType has last raw value and moving average value based on max period
+   * This function is for MeasurementType that use INT as the data type
+   *
+   * @param type measurement type that will be updated
+   * @param val (int) the new value
+   * @param ch (int) the MeasurementType channel, not every MeasurementType has more than 1 channel.
+   * Currently maximum channel is 2. Default: 1 (channel 1)
+   * @return false if new value invalid consecutively reach threshold (max period)
+   * @return true otherwise
+   */
+  bool update(MeasurementType type, int val, int ch = 1);
 
-  int pm1Value01;
-  int pm1Value25;
-  int pm1Value10;
-  int pm1PCount;
-  int pm1temp;
-  int pm1hum;
-  int pm2Value01;
-  int pm2Value25;
-  int pm2Value10;
-  int pm2PCount;
-  int pm2temp;
-  int pm2hum;
-  int countPosition;
-  const int targetCount = 20;
+  /**
+   * @brief update target measurement type with new value.
+   * Each MeasurementType has last raw value and moving average value based on max period
+   * This function is for MeasurementType that use FLOAT as the data type
+   *
+   * @param type measurement type that will be updated
+   * @param val (float) the new value
+   * @param ch (int) the MeasurementType channel, not every MeasurementType has more than 1 channel.
+   * Currently maximum channel is 2. Default: 1 (channel 1)
+   * @return false if new value invalid consecutively reach threshold (max period)
+   * @return true otherwise
+   */
+  bool update(MeasurementType type, float val, int ch = 1);
+
+  /**
+   * @brief Get the target measurement latest value
+   *
+   * @param type measurement type that will be retrieve
+   * @param ch target type value channel
+   * @return int measurement type value
+   */
+  int get(MeasurementType type, int ch = 1);
+
+  /**
+   * @brief Get the target measurement latest value
+   *
+   * @param type measurement type that will be retrieve
+   * @param ch target type value channel
+   * @return float measurement type value
+   */
+  float getFloat(MeasurementType type, int ch = 1);
+
+  /**
+   * @brief Get the target measurement average value
+   *
+   * @param type measurement type that will be retrieve
+   * @param ch target type value channel
+   * @return moving average value of target measurements type  
+   */
+  float getAverage(MeasurementType type, int ch = 1);
+
+  /**
+   * @brief Get the Corrected PM25 object based on the correction algorithm from configuration
+   * 
+   * If correction is not enabled, then will return the raw value (either average or last value)
+   *
+   * @param ag AirGradient instance
+   * @param config Configuration instance
+   * @param useAvg Use moving average value if true, otherwise use latest value
+   * @param ch MeasurementType channel
+   * @return float Corrected PM2.5 value
+   */
+  float getCorrectedPM25(AirGradient &ag, Configuration &config, bool useAvg = false, int ch = 1);
+
+  /**
+   * build json payload for every measurements
+   */
+  String toString(bool localServer, AgFirmwareMode fwMode, int rssi, AirGradient &ag,
+                  Configuration &config);
+
+  /**
+   * Set to true if want to debug every update value
+   */
+  void setDebug(bool debug);
+
+  // TODO: update this to use setter
   int bootCount;
 
-  String toString(bool isLocal, AgFirmwareMode fwMode, int rssi, void* _ag, void* _config);
+private:
+  // Some declared as an array (channel), because FW_MODE_O_1PPx has two PMS5003T
+  FloatValue _temperature[2];
+  FloatValue _humidity[2];
+  IntegerValue _co2;
+  IntegerValue _tvoc; // Index value
+  IntegerValue _tvoc_raw;
+  IntegerValue _nox; // Index value
+  IntegerValue _nox_raw;
+  IntegerValue _pm_01[2];    // pm 1.0 atmospheric environment
+  IntegerValue _pm_25[2];    // pm 2.5 atmospheric environment
+  IntegerValue _pm_10[2];    // pm 10 atmospheric environment
+  IntegerValue _pm_01_sp[2]; // pm 1.0 standard particle
+  IntegerValue _pm_25_sp[2]; // pm 2.5 standard particle
+  IntegerValue _pm_10_sp[2]; // pm 10 standard particle
+  IntegerValue _pm_03_pc[2]; // particle count 0.3
+  IntegerValue _pm_05_pc[2]; // particle count 0.5
+  IntegerValue _pm_01_pc[2]; // particle count 1.0
+  IntegerValue _pm_25_pc[2]; // particle count 2.5
+  IntegerValue _pm_5_pc[2];  // particle count 5.0
+  IntegerValue _pm_10_pc[2]; // particle count 10
+
+  bool _debug = false;
+
+  /**
+   * @brief Get PMS5003 firmware version string
+   *
+   * @param fwCode
+   * @return String
+   */
+  String pms5003FirmwareVersion(int fwCode);
+  /**
+   * @brief Get PMS5003T firmware version string
+   *
+   * @param fwCode
+   * @return String
+   */
+  String pms5003TFirmwareVersion(int fwCode);
+  /**
+   * @brief Get firmware version string
+   *
+   * @param prefix Prefix firmware string
+   * @param fwCode Version code
+   * @return string
+   */
+  String pms5003FirmwareVersionBase(String prefix, int fwCode);
+
+  /**
+   * Convert AgValue Type to string representation of the value
+   */
+  String measurementTypeStr(MeasurementType type);
+
+  /**
+   * @brief check if provided channel is a valid channel or not
+   * abort program if invalid
+   */
+  void validateChannel(int ch);
+
+  JSONVar buildOutdoor(bool localServer, AgFirmwareMode fwMode, AirGradient &ag,
+                       Configuration &config);
+  JSONVar buildIndoor(bool localServer, AirGradient &ag, Configuration &config);
+  JSONVar buildPMS(AirGradient &ag, int ch, bool allCh, bool withTempHum, bool compensate);
 };
 
 #endif /** _AG_VALUE_H_ */

src/AgWiFiConnector.cpp

@@ -41,6 +41,28 @@ bool WifiConnector::connect(void) {
     }
   }
 
+  WiFi.begin();
+  String wifiSSID = WIFI()->getWiFiSSID(true);
+  if (wifiSSID.isEmpty()) {
+    logInfo("Connected WiFi is empty, connect to default wifi \"" +
+            String(this->defaultSsid) + String("\""));
+
+    /** Set wifi connect */
+    WiFi.begin(this->defaultSsid, this->defaultPassword);
+
+    /** Wait for wifi connect to AP */
+    int count = 0;
+    while (WiFi.status() != WL_CONNECTED) {
+      delay(1000);
+      count++;
+      if (count >= 15) {
+        logError("Try connect to default wifi \"" + String(this->defaultSsid) +
+                 String("\" failed"));
+        break;
+      }
+    }
+  }
+
   WIFI()->setConfigPortalBlocking(false);
   WIFI()->setConnectTimeout(15);
   WIFI()->setTimeout(WIFI_CONNECT_COUNTDOWN_MAX);
@@ -50,7 +72,7 @@ bool WifiConnector::connect(void) {
   WIFI()->setSaveParamsCallback([this]() { _wifiSaveParamCallback(); });
   WIFI()->setConfigPortalTimeoutCallback([this]() {_wifiTimeoutCallback();});
   if (ag->isOne() || (ag->isPro4_2()) || ag->isPro3_3() || ag->isBasic()) {
-    disp.setText("Connect to", "WiFi", "...");
+    disp.setText("Connecting to", "WiFi", "...");
   } else {
     logInfo("Connecting to WiFi...");
   }
@@ -383,3 +405,11 @@ bool WifiConnector::hasConfigurated(void) {
  * @return false
  */
 bool WifiConnector::isConfigurePorttalTimeout(void) { return connectorTimeout; }
+
+/**
+ * @brief Set wifi connect to default WiFi
+ * 
+ */
+void WifiConnector::setDefault(void) {
+  WiFi.begin("airgradient", "cleanair");
+}

src/AgWiFiConnector.h

@@ -46,6 +46,10 @@ public:
   String localIpStr(void);
   bool hasConfigurated(void);
   bool isConfigurePorttalTimeout(void);
+
+  const char* defaultSsid = "airgradient";
+  const char* defaultPassword = "cleanair";
+  void setDefault(void);
 };
 
 #endif /** _AG_WIFI_CONNECTOR_H_ */

src/AirGradient.cpp

@@ -65,6 +65,10 @@ bool AirGradient::isOne(void) {
   return boardType == BoardType::ONE_INDOOR;
 }
 
+bool AirGradient::isOpenAir(void) { 
+  return boardType == BoardType::OPEN_AIR_OUTDOOR; 
+}
+
 bool AirGradient::isPro4_2(void) {
   return boardType == BoardType::DIY_PRO_INDOOR_V4_2;
 }

src/AirGradient.h

@@ -15,7 +15,7 @@
 #include "Main/utils.h"
 
 #ifndef GIT_VERSION
-#define GIT_VERSION "3.1.5-snap"
+#define GIT_VERSION "3.1.12-snap"
 #endif
 
 /**
@@ -135,6 +135,14 @@ public:
    */
   bool isOne(void);
 
+  /**
+   * @brief Check that Airgradient object is OPEN_AIR
+   * 
+   * @return true 
+   * @return false 
+   */
+  bool isOpenAir(void);
+
   /**
    * @brief Check that Airgradient object is DIY_PRO 4.2 indoor
    *

src/App/AppDef.h

@@ -94,6 +94,18 @@ enum ConfigurationControl {
   ConfigurationControlBoth
 };
 
+enum PMCorrectionAlgorithm {
+  Unknown, // Unknown algorithm
+  None,    // No PM correction
+  EPA_2021,
+  SLR_PMS5003_20220802,
+  SLR_PMS5003_20220803,
+  SLR_PMS5003_20220824,
+  SLR_PMS5003_20231030,
+  SLR_PMS5003_20231218,
+  SLR_PMS5003_20240104,
+};
+
 enum AgFirmwareMode {
   FW_MODE_I_9PSL, /** ONE_INDOOR */
   FW_MODE_O_1PST, /** PMS5003T, S8 and SGP41 */

src/Main/utils.cpp

@@ -48,14 +48,14 @@ bool utils::isValidCO2(int16_t value) {
   return false;
 }
 
-bool utils::isValidPMS(int value) {
+bool utils::isValidPm(int value) {
   if ((value >= VALID_PMS_MIN) && (value <= VALID_PMS_MAX)) {
     return true;
   }
   return false;
 }
 
-bool utils::isValidPMS03Count(int value) {
+bool utils::isValidPm03Count(int value) {
   if (value >= VALID_PMS03COUNT_MIN) {
     return true;
   }
@@ -82,8 +82,13 @@ float utils::getInvalidHumidity(void) { return INVALID_HUMIDITY; }
 
 int utils::getInvalidCO2(void) { return INVALID_CO2; }
 
-int utils::getInvalidPMS(void) { return INVALID_PMS; }
+int utils::getInvalidPmValue(void) { return INVALID_PMS; }
 
 int utils::getInvalidNOx(void) { return INVALID_NOX; }
 
 int utils::getInvalidVOC(void) { return INVALID_VOC; }
+
+float utils::degreeC_To_F(float t) {
+  /** (t * 9)/5 + 32 */
+  return t * 1.8f + 32.0f;
+}

src/Main/utils.h

@@ -14,16 +14,17 @@ public:
   static bool isValidTemperature(float value);
   static bool isValidHumidity(float value);
   static bool isValidCO2(int16_t value);
-  static bool isValidPMS(int value);
-  static bool isValidPMS03Count(int value);
+  static bool isValidPm(int value);
+  static bool isValidPm03Count(int value);
   static bool isValidNOx(int value);
   static bool isValidVOC(int value);
   static float getInvalidTemperature(void);
   static float getInvalidHumidity(void);
   static int getInvalidCO2(void);
-  static int getInvalidPMS(void);
+  static int getInvalidPmValue(void);
   static int getInvalidNOx(void);
   static int getInvalidVOC(void);
+  static float degreeC_To_F(float t);
 };
 
 

src/PMS/PMS.cpp

@@ -2,248 +2,294 @@
 #include "../Main/BoardDef.h"
 
 /**
- * @brief Init and check that sensor has connected
+ * @brief Initializes the sensor and attempts to read data.
  *
  * @param stream UART stream
  * @return true Sucecss
  * @return false Failure
  */
 bool PMSBase::begin(Stream *stream) {
-  this->stream = stream;
+  Serial.printf("initializing PM sensor\n");
 
-  failed = true;
-  lastRead = 0; // To read buffer on handle without wait after 1.5sec
+  failCount = 0;
+  _connected = false;
 
-  this->stream->flush();
+  // empty first
+  int bytesCleared = 0;
+  while (stream->read() != -1) {
+    bytesCleared++;
+  }
+  Serial.printf("cleared %d byte(s)\n", bytesCleared);
+
+  // explicitly put the sensor into active mode, this seems to be be needed for the Cubic PM2009X
+  Serial.printf("setting active mode\n");
+  uint8_t activeModeCommand[] = { 0x42, 0x4D, 0xE1, 0x00, 0x01, 0x01, 0x71 };
+  size_t bytesWritten = stream->write(activeModeCommand, sizeof(activeModeCommand));
+  Serial.printf("%d byte(s) written\n", bytesWritten);
 
   // Run and check sensor data for 4sec
-  while (1) {
-    handle();
-    if (failed == false) {
-      return true;
+  unsigned long lastInit = millis();
+  while (true) {
+    readPackage(stream);
+    if (_connected) {
+      break;
     }
 
     delay(1);
-    uint32_t ms = (uint32_t)(millis() - lastRead);
+    unsigned long ms = (unsigned long)(millis() - lastInit);
     if (ms >= 4000) {
       break;
     }
   }
-  return false;
+  return _connected;
 }
 
 /**
- * @brief Check and read sensor data then update variable.
- * Check result from method @isFailed before get value
+ * @brief Read PMS package send to device each 1sec
+ *
+ * @param serial
  */
-void PMSBase::handle() {
-  uint32_t ms;
-  if (lastRead == 0) {
-    lastRead = millis();
-    if (lastRead == 0) {
-      lastRead = 1;
+void PMSBase::readPackage(Stream *serial) {
+  /** If readPackage has process as period larger than READ_PACKAGE_TIMEOUT,
+   * should be clear the lastPackage and readBufferIndex */
+  if (lastReadPackage) {
+    unsigned long ms = (unsigned long)(millis() - lastReadPackage);
+    if (ms >= READ_PACKGE_TIMEOUT) {
+      /** Clear buffer */
+      readBufferIndex = 0;
+
+      /** Disable check read package timeout */
+      lastPackage = 0;
+
+      Serial.println("Last process timeout, clear buffer and last handle package");
+    }
+
+    lastReadPackage = millis();
+    if (!lastReadPackage) {
+      lastReadPackage = 1;
     }
   } else {
-    ms = (uint32_t)(millis() - lastRead);
-    /**
-     * The PMS in Active mode sends an update data every 1 second. If we read
-     * exactly every 1 sec then we may or may not get an update (depending on
-     * timing tolerances). Hence we read every 2.5 seconds and expect 2 ..3
-     * updates,
-     */
-    if (ms < 2500) {
-      return;
+    lastReadPackage = millis();
+    if (!lastReadPackage) {
+      lastReadPackage = 1;
     }
   }
-  bool result = false;
-  char buf[32];
-  int bufIndex;
-  int step = 0;
-  int len = 0;
-  int bcount = 0;
 
-  while (stream->available()) {
-    char value = stream->read();
-    switch (step) {
-    case 0: {
+  /** Count to call delay() to release the while loop MCU resource for avoid the
+   * watchdog time reset */
+  uint8_t delayCount = 0;
+  while (serial->available()) {
+    /** Get value */
+    uint8_t value = (uint8_t)serial->read();
+
+    /** Process receiving package... */
+    switch (readBufferIndex) {
+    case 0: /** Start byte 1 */
       if (value == 0x42) {
-        step = 1;
-        bufIndex = 0;
-        buf[bufIndex++] = value;
+        readBuffer[readBufferIndex++] = value;
       }
       break;
-    }
-    case 1: {
+    case 1: /** Start byte 2 */
       if (value == 0x4d) {
-        step = 2;
-        buf[bufIndex++] = value;
-        // Serial.println("Got 0x4d");
+        readBuffer[readBufferIndex++] = value;
       } else {
-        step = 0;
+        readBufferIndex = 0;
       }
       break;
-    }
-    case 2: {
-      buf[bufIndex++] = value;
-      if (bufIndex >= 4) {
-        len = toI16(&buf[2]);
-        if (len != 28) {
-          // Serial.printf("Got good bad len %d\r\n", len);
-          len += 4;
-          step = 3;
-        } else {
-          // Serial.println("Got good len");
-          step = 4;
+    case 2: /** Frame length */
+      if (value == 0x00) {
+        readBuffer[readBufferIndex++] = value;
+      } else {
+        readBufferIndex = 0;
+      }
+      break;
+    case 3: /** Frame length */
+      if (value == 0x1C) {
+        readBuffer[readBufferIndex++] = value;
+      } else {
+        readBufferIndex = 0;
+      }
+      break;
+    default: /** Data */
+    {
+      readBuffer[readBufferIndex++] = value;
+
+      /** Check that received full bufer */
+      if (readBufferIndex >= sizeof(readBuffer)) {
+        /** validata package */
+        if (validate(readBuffer)) {
+          _connected = true; /** Set connected status */
+
+          /** Parse data */
+          parse(readBuffer);
+
+          /** Set last received package */
+          lastPackage = millis();
+          if (lastPackage == 0) {
+            lastPackage = 1;
+          }
         }
+
+        /** Clear buffer index */
+        readBufferIndex = 0;
       }
       break;
     }
-    case 3: {
-      bufIndex++;
-      if (bufIndex >= len) {
-        step = 0;
-        // Serial.println("Bad lengh read all buffer");
-      }
-      break;
-    }
-    case 4: {
-      buf[bufIndex++] = value;
-      if (bufIndex >= 32) {
-        result |= validate(buf);
-        step = 0;
-        // Serial.println("Got data");
-      }
-      break;
-    }
-    default:
-      break;
     }
 
-    // Reduce core panic: delay 1 ms each 32bytes data
-    bcount++;
-    if ((bcount % 32) == 0) {
+    /** Avoid task watchdog timer reset... */
+    delayCount++;
+    if (delayCount >= 32) {
+      delayCount = 0;
       delay(1);
     }
   }
 
-  if (result) {
-    lastRead = millis();
-    if (lastRead == 0) {
-      lastRead = 1;
-    }
-    failed = false;
-  } else {
-    if (ms > 5000) {
-      failed = true;
+  /** Check that sensor removed */
+  if (lastPackage) {
+    unsigned long ms = (unsigned long)(millis() - lastPackage);
+    if (ms >= READ_PACKGE_TIMEOUT) {
+      lastPackage = 0;
+      _connected = false;
+      Serial.println("PMS disconnected");
     }
   }
 }
 
 /**
- * @brief Check that PMS send is failed or disconnected
+ * @brief Increate number of fail
  *
- * @return true Failed
- * @return false No problem
  */
-bool PMSBase::isFailed(void) { return failed; }
+void PMSBase::updateFailCount(void) {
+  if (failCount < failCountMax) {
+    failCount++;
+  }
+}
+
+void PMSBase::resetFailCount(void) { failCount = 0; }
+
+/**
+ * @brief Get number of fail
+ *
+ * @return int
+ */
+int PMSBase::getFailCount(void) { return failCount; }
+
+int PMSBase::getFailCountMax(void) { return failCountMax; }
 
 /**
  * @brief Read PMS 0.1 ug/m3 with CF = 1 PM estimates
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getRaw0_1(void) { return toU16(&package[4]); }
+uint16_t PMSBase::getRaw0_1(void) { return pms_raw0_1; }
 
 /**
  * @brief Read PMS 2.5 ug/m3 with CF = 1 PM estimates
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getRaw2_5(void) { return toU16(&package[6]); }
+uint16_t PMSBase::getRaw2_5(void) { return pms_raw2_5; }
 
 /**
  * @brief Read PMS 10 ug/m3 with CF = 1 PM estimates
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getRaw10(void) { return toU16(&package[8]); }
+uint16_t PMSBase::getRaw10(void) { return pms_raw10; }
 
 /**
  * @brief Read PMS 0.1 ug/m3
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getPM0_1(void) { return toU16(&package[10]); }
+uint16_t PMSBase::getPM0_1(void) { return pms_pm0_1; }
 
 /**
  * @brief Read PMS 2.5 ug/m3
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getPM2_5(void) { return toU16(&package[12]); }
+uint16_t PMSBase::getPM2_5(void) { return pms_pm2_5; }
 
 /**
  * @brief Read PMS 10 ug/m3
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getPM10(void) { return toU16(&package[14]); }
+uint16_t PMSBase::getPM10(void) { return pms_pm10; }
 
 /**
  * @brief Get numnber concentrations over 0.3 um/0.1L
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getCount0_3(void) { return toU16(&package[16]); }
+uint16_t PMSBase::getCount0_3(void) { return pms_count0_3; }
 
 /**
  * @brief Get numnber concentrations over 0.5 um/0.1L
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getCount0_5(void) { return toU16(&package[18]); }
+uint16_t PMSBase::getCount0_5(void) { return pms_count0_5; }
 
 /**
  * @brief Get numnber concentrations over 1.0 um/0.1L
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getCount1_0(void) { return toU16(&package[20]); }
+uint16_t PMSBase::getCount1_0(void) { return pms_count1_0; }
 
 /**
  * @brief Get numnber concentrations over 2.5 um/0.1L
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getCount2_5(void) { return toU16(&package[22]); }
+uint16_t PMSBase::getCount2_5(void) { return pms_count2_5; }
+
+bool PMSBase::connected(void) { return _connected; }
 
 /**
  * @brief Get numnber concentrations over 5.0 um/0.1L (only PMS5003)
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getCount5_0(void) { return toU16(&package[24]); }
+uint16_t PMSBase::getCount5_0(void) { return pms_count5_0; }
 
 /**
  * @brief Get numnber concentrations over 10.0 um/0.1L (only PMS5003)
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getCount10(void) { return toU16(&package[26]); }
+uint16_t PMSBase::getCount10(void) { return pms_count10; }
 
 /**
  * @brief Get temperature (only PMS5003T)
  *
  * @return uint16_t
  */
-int16_t PMSBase::getTemp(void) { return toI16(&package[24]); }
+int16_t PMSBase::getTemp(void) { return pms_temp; }
 
 /**
  * @brief Get humidity (only PMS5003T)
  *
  * @return uint16_t
  */
-uint16_t PMSBase::getHum(void) { return toU16(&package[26]); }
+uint16_t PMSBase::getHum(void) { return pms_hum; }
+
+/**
+ * @brief Get firmware version code
+ *
+ * @return uint8_t
+ */
+uint8_t PMSBase::getFirmwareVersion(void) { return pms_firmwareVersion; }
+
+/**
+ * @brief Ge PMS5003 error code
+ *
+ * @return uint8_t
+ */
+uint8_t PMSBase::getErrorCode(void) { return pms_errorCode; }
 
 /**
  * @brief Convert PMS2.5 to US AQI unit
@@ -252,57 +298,99 @@ uint16_t PMSBase::getHum(void) { return toU16(&package[26]); }
  * @return int
  */
 int PMSBase::pm25ToAQI(int pm02) {
-  if (pm02 <= 12.0)
-    return ((50 - 0) / (12.0 - .0) * (pm02 - .0) + 0);
+  if (pm02 <= 9.0)
+    return ((50 - 0) / (9.0 - .0) * (pm02 - .0) + 0);
   else if (pm02 <= 35.4)
-    return ((100 - 50) / (35.4 - 12.0) * (pm02 - 12.0) + 50);
+    return ((100 - 51) / (35.4 - 9.1) * (pm02 - 9.0) + 51);
   else if (pm02 <= 55.4)
-    return ((150 - 100) / (55.4 - 35.4) * (pm02 - 35.4) + 100);
-  else if (pm02 <= 150.4)
-    return ((200 - 150) / (150.4 - 55.4) * (pm02 - 55.4) + 150);
-  else if (pm02 <= 250.4)
-    return ((300 - 200) / (250.4 - 150.4) * (pm02 - 150.4) + 200);
-  else if (pm02 <= 350.4)
-    return ((400 - 300) / (350.4 - 250.4) * (pm02 - 250.4) + 300);
-  else if (pm02 <= 500.4)
-    return ((500 - 400) / (500.4 - 350.4) * (pm02 - 350.4) + 400);
+    return ((150 - 101) / (55.4 - 35.5) * (pm02 - 35.5) + 101);
+  else if (pm02 <= 125.4)
+    return ((200 - 151) / (125.4 - 55.5) * (pm02 - 55.5) + 151);
+  else if (pm02 <= 225.4)
+    return ((300 - 201) / (225.4 - 125.5) * (pm02 - 125.5) + 201);
+  else if (pm02 <= 325.4)
+    return ((500 - 301) / (325.4 - 225.5) * (pm02 - 225.5) + 301);
   else
     return 500;
 }
 
+
+/**
+ * @brief SLR correction for PM2.5 
+ * 
+ * Reference: https://www.airgradient.com/blog/low-readings-from-pms5003/
+ * 
+ * @param pm25 PM2.5 raw value
+ * @param pm003Count PM0.3 count
+ * @param scalingFactor Scaling factor
+ * @param intercept Intercept
+ * @return float Calibrated PM2.5 value
+ */
+float PMSBase::slrCorrection(float pm25, float pm003Count, float scalingFactor, float intercept) {
+  float calibrated;
+
+  float lowCalibrated = (scalingFactor * pm003Count) + intercept;
+  if (lowCalibrated < 31) {
+    calibrated = lowCalibrated;
+  } else {
+    calibrated = pm25;
+  }
+
+  // No negative value for pm2.5
+  if (calibrated < 0) {
+    return 0.0;
+  }
+
+  return calibrated;
+}
+
 /**
  * @brief Correction PM2.5
- * 
+ *
+ * Formula: https://www.airgradient.com/documentation/correction-algorithms/
+ *
  * @param pm25 Raw PM2.5 value
  * @param humidity Humidity value (%)
- * @return int 
+ * @return compensated pm25 value
  */
-int PMSBase::compensated(int pm25, float humidity) {
+float PMSBase::compensate(float pm25, float humidity) {
   float value;
+
+  // Correct invalid humidity value
   if (humidity < 0) {
     humidity = 0;
   }
   if (humidity > 100) {
-    humidity = 100;
+    humidity = 100.0f;
   }
 
-  if(pm25 < 30) {
+  // If its already 0, do not proceed
+  if (pm25 == 0) {
+    return 0.0;
+  }
+
+  if (pm25 < 30) { /** pm2.5 < 30 */
     value = (pm25 * 0.524f) - (humidity * 0.0862f) + 5.75f;
-  } else if(pm25 < 50) {
-    value = (0.786f * (pm25 / 20 - 3 / 2) + 0.524f * (1 - (pm25 / 20 - 3 / 2))) * pm25 - (0.0862f * humidity) + 5.75f;
-  } else if(pm25 < 210) {
+  } else if (pm25 < 50) { /** 30 <= pm2.5 < 50 */
+    value = (0.786f * (pm25 * 0.05f - 1.5f) + 0.524f * (1.0f - (pm25 * 0.05f - 1.5f))) * pm25 -
+            (0.0862f * humidity) + 5.75f;
+  } else if (pm25 < 210) { /** 50 <= pm2.5 < 210 */
     value = (0.786f * pm25) - (0.0862f * humidity) + 5.75f;
-  } else if(pm25 < 260) {
-    value = (0.69f * (pm25/50 - 21/5) + 0.786f * (1 - (pm25/50 - 21/5))) * pm25 - (0.0862f * humidity * (1 - (pm25/50 - 21/5))) + (2.966f * (pm25/50 -21/5)) + (5.75f * (1 - (pm25/50 - 21/5))) + (8.84f * (1.e-4) * pm25* (pm25/50 - 21/5));
-  } else {
-    value = 2.966f + (0.69f * pm25) + (8.84f * (1.e-4) * pm25);
+  } else if (pm25 < 260) { /** 210 <= pm2.5 < 260 */
+    value = (0.69f * (pm25 * 0.02f - 4.2f) + 0.786f * (1.0f - (pm25 * 0.02f - 4.2f))) * pm25 -
+            (0.0862f * humidity * (1.0f - (pm25 * 0.02f - 4.2f))) +
+            (2.966f * (pm25 * 0.02f - 4.2f)) + (5.75f * (1.0f - (pm25 * 0.02f - 4.2f))) +
+            (8.84f * (1.e-4) * pm25 * pm25 * (pm25 * 0.02f - 4.2f));
+  } else { /** 260 <= pm2.5 */
+    value = 2.966f + (0.69f * pm25) + (8.84f * (1.e-4) * pm25 * pm25);
   }
 
-  if(value < 0) {
-    value = 0;
+  // No negative value for pm2.5
+  if (value < 0) {
+    return 0.0;
   }
 
-  return (int)value;
+  return value;
 }
 
 /**
@@ -311,13 +399,13 @@ int PMSBase::compensated(int pm25, float humidity) {
  * @param buf bytes array (must be >= 2)
  * @return int16_t
  */
-int16_t PMSBase::toI16(char *buf) {
+int16_t PMSBase::toI16(const uint8_t *buf) {
   int16_t value = buf[0];
   value = (value << 8) | buf[1];
   return value;
 }
 
-uint16_t PMSBase::toU16(char *buf) {
+uint16_t PMSBase::toU16(const uint8_t *buf) {
   uint16_t value = buf[0];
   value = (value << 8) | buf[1];
   return value;
@@ -330,16 +418,38 @@ uint16_t PMSBase::toU16(char *buf) {
  * @return true Success
  * @return false Failed
  */
-bool PMSBase::validate(char *buf) {
+bool PMSBase::validate(const uint8_t *buf) {
   uint16_t sum = 0;
   for (int i = 0; i < 30; i++) {
     sum += buf[i];
   }
   if (sum == toU16(&buf[30])) {
-    for (int i = 0; i < 32; i++) {
-      package[i] = buf[i];
-    }
     return true;
   }
   return false;
 }
+
+void PMSBase::parse(const uint8_t *buf) {
+  // Standard particle
+  pms_raw0_1 = toU16(&buf[4]);
+  pms_raw2_5 = toU16(&buf[6]);
+  pms_raw10 = toU16(&buf[8]);
+  // atmospheric
+  pms_pm0_1 = toU16(&buf[10]);
+  pms_pm2_5 = toU16(&buf[12]);
+  pms_pm10 = toU16(&buf[14]);
+
+  // particle count
+  pms_count0_3 = toU16(&buf[16]);
+  pms_count0_5 = toU16(&buf[18]);
+  pms_count1_0 = toU16(&buf[20]);
+  pms_count2_5 = toU16(&buf[22]);
+  pms_count5_0 = toU16(&buf[24]); // PMS5003 only
+  pms_count10 = toU16(&buf[26]);  // PMS5003 only
+
+  // Others
+  pms_temp = toU16(&buf[24]); // PMS5003T only
+  pms_hum = toU16(&buf[26]);  // PMS5003T only
+  pms_firmwareVersion = buf[28];
+  pms_errorCode = buf[29];
+}

src/PMS/PMS.h

@@ -3,11 +3,19 @@
 
 #include <Arduino.h>
 
+#define PMS_FAIL_COUNT_SET_INVALID 3
+
+/**
+ * Known to work with these sensors: Plantower PMS5003, Plantower PMS5003, Cubic PM2009X
+ */
 class PMSBase {
 public:
   bool begin(Stream *stream);
-  void handle();
-  bool isFailed(void);
+  void readPackage(Stream *stream);
+  void updateFailCount(void);
+  void resetFailCount(void);
+  int getFailCount(void);
+  int getFailCountMax(void);
   uint16_t getRaw0_1(void);
   uint16_t getRaw2_5(void);
   uint16_t getRaw10(void);
@@ -18,6 +26,7 @@ public:
   uint16_t getCount0_5(void);
   uint16_t getCount1_0(void);
   uint16_t getCount2_5(void);
+  bool connected(void);
 
   /** For PMS5003 */
   uint16_t getCount5_0(void);
@@ -26,20 +35,56 @@ public:
   /** For PMS5003T*/
   int16_t getTemp(void);
   uint16_t getHum(void);
+  uint8_t getFirmwareVersion(void); 
+  uint8_t getErrorCode(void);
 
   int pm25ToAQI(int pm02);
-  int compensated(int pm25, float humidity);
+  float slrCorrection(float pm25, float pm003Count, float scalingFactor, float intercept);
+  float compensate(float pm25, float humidity);
 
 private:
-  Stream *stream;
-  char package[32];
-  int packageIndex;
-  bool failed = false;
-  uint32_t lastRead;
+  static const uint8_t package_size = 32;
 
-  int16_t toI16(char *buf);
-  uint16_t toU16(char* buf);
-  bool validate(char *buf);
+  /** In normal package interval is 200-800ms, In case small changed on sensor
+   * it's will interval reach to 2.3sec
+   */
+  const uint16_t READ_PACKGE_TIMEOUT = 3000;   /** ms */
+  const int failCountMax = 10;
+  int failCount = 0;
+
+  uint8_t readBuffer[package_size];
+  uint8_t readBufferIndex = 0;
+
+  /**
+   * Save last time received package success. 0 to disable check package
+   * timeout.
+   */
+  unsigned long lastPackage = 0;
+  bool _connected;
+
+  unsigned long lastReadPackage = 0;
+
+  uint16_t pms_raw0_1;
+  uint16_t pms_raw2_5;
+  uint16_t pms_raw10;
+  uint16_t pms_pm0_1;
+  uint16_t pms_pm2_5;
+  uint16_t pms_pm10;
+  uint16_t pms_count0_3;
+  uint16_t pms_count0_5;
+  uint16_t pms_count1_0;
+  uint16_t pms_count2_5;
+  uint16_t pms_count5_0;
+  uint16_t pms_count10;
+  int16_t  pms_temp;
+  uint16_t pms_hum;
+  uint8_t  pms_errorCode;
+  uint8_t  pms_firmwareVersion;
+
+  int16_t toI16(const uint8_t *buf);
+  uint16_t toU16(const uint8_t *buf);
+  bool validate(const uint8_t *buf);
+  void parse(const uint8_t* buf);
 };
 
 #endif /** _PMS5003_BASE_H_ */

src/PMS/PMS5003.cpp

@@ -3,7 +3,6 @@
 #include "../Main/utils.h"
 
 #if defined(ESP8266)
-#include <SoftwareSerial.h>
 /**
  * @brief Init sensor
  *
@@ -38,14 +37,11 @@ bool PMS5003::begin(HardwareSerial &serial) {
 PMS5003::PMS5003(BoardType def) : _boardDef(def) {}
 
 /**
- * @brief Init sensor
- *
- * @return true Success
- * @return false Failure
+ * Initializes the sensor.
  */
 bool PMS5003::begin(void) {
   if (this->_isBegin) {
-    AgLog("Initialized, call end() then try again");
+    AgLog("Already initialized, call end() then try again");
     return true;
   }
 
@@ -63,11 +59,10 @@ bool PMS5003::begin(void) {
   }
 
 #if defined(ESP8266)
-  bsp->Pms5003.uart_tx_pin;
-  SoftwareSerial *uart =
+  this->_serial =
       new SoftwareSerial(bsp->Pms5003.uart_tx_pin, bsp->Pms5003.uart_rx_pin);
-  uart->begin(9600);
-  if (pms.begin(uart) == false) {
+  this->_serial->begin(9600);
+  if (pms.begin(this->_serial) == false) {
     AgLog("PMS failed");
     return false;
   }
@@ -78,34 +73,55 @@ bool PMS5003::begin(void) {
     return false;
   }
 #endif
-
+  _ver = pms.getFirmwareVersion();
   this->_isBegin = true;
   return true;
 }
 
 /**
- * @brief Read PM1.0 must call this function after @ref readData success
+ * @brief Read PM1.0
  *
- * @return int PM1.0 index
+ * @return int PM1.0 index (atmospheric environment)
  */
 int PMS5003::getPm01Ae(void) { return pms.getPM0_1(); }
 
 /**
- * @brief Read PM2.5 must call this function after @ref readData success
+ * @brief Read PM2.5
  *
- * @return int PM2.5 index
+ * @return int PM2.5 index (atmospheric environment)
  */
 int PMS5003::getPm25Ae(void) { return pms.getPM2_5(); }
 
 /**
- * @brief Read PM10.0 must call this function after @ref readData success
+ * @brief Read PM10.0
  *
- * @return int PM10.0 index
+ * @return int PM10.0 index (atmospheric environment)
  */
 int PMS5003::getPm10Ae(void) { return pms.getPM10(); }
 
 /**
- * @brief Read PM0.3 must call this function after @ref readData success
+ * @brief Read PM1.0
+ *
+ * @return int PM1.0 index (standard particle)
+ */
+int PMS5003::getPm01Sp(void) { return pms.getRaw0_1(); }
+
+/**
+ * @brief Read PM2.5
+ *
+ * @return int PM2.5 index (standard particle)
+ */
+int PMS5003::getPm25Sp(void) { return pms.getRaw2_5(); }
+
+/**
+ * @brief Read PM10
+ *
+ * @return int PM10 index (standard particle)
+ */
+int PMS5003::getPm10Sp(void) { return pms.getRaw10(); }
+
+/**
+ * @brief Read particle 0.3 count
  *
  * @return int PM0.3 index
  */
@@ -113,6 +129,41 @@ int PMS5003::getPm03ParticleCount(void) {
   return pms.getCount0_3();
 }
 
+/**
+ * @brief Read particle 1.0 count
+ *
+ * @return int particle 1.0 count index
+ */
+int PMS5003::getPm01ParticleCount(void) { return pms.getCount1_0(); }
+
+/**
+ * @brief Read particle 0.5 count
+ *
+ * @return int particle 0.5 count index
+ */
+int PMS5003::getPm05ParticleCount(void) { return pms.getCount0_5(); }
+
+/**
+ * @brief Read particle 2.5 count
+ *
+ * @return int particle 2.5 count index
+ */
+int PMS5003::getPm25ParticleCount(void) { return pms.getCount2_5(); }
+
+/**
+ * @brief Read particle 5.0 count
+ *
+ * @return int particle 5.0 count index
+ */
+int PMS5003::getPm5ParticleCount(void) { return pms.getCount5_0(); }
+
+/**
+ * @brief Read particle 10 count
+ *
+ * @return int particle 10 count index
+ */
+int PMS5003::getPm10ParticleCount(void) { return pms.getCount10(); }
+
 /**
  * @brief Convert PM2.5 to US AQI
  *
@@ -121,16 +172,42 @@ int PMS5003::getPm03ParticleCount(void) {
  */
 int PMS5003::convertPm25ToUsAqi(int pm25) { return pms.pm25ToAQI(pm25); }
 
+float PMS5003::slrCorrection(float pm25, float pm003Count, float scalingFactor, float intercept) {
+  return pms.slrCorrection(pm25, pm003Count, scalingFactor, intercept);
+}
+
 /**
  * @brief Correct PM2.5
- * 
+ *
+ * Reference formula: https://www.airgradient.com/documentation/correction-algorithms/
+ *
  * @param pm25 PM2.5 raw value
  * @param humidity Humidity value
- * @return float 
+ * @return compensated value in float
  */
-int PMS5003::compensated(int pm25, float humidity) {
-  return pms.compensated(pm25, humidity);
-}
+float PMS5003::compensate(float pm25, float humidity) { return pms.compensate(pm25, humidity); }
+
+/**
+ * @brief Get sensor firmware version
+ * 
+ * @return int
+ */
+int PMS5003::getFirmwareVersion(void) { return _ver; }
+
+/**
+ * @brief Get sensor error code
+ * 
+ * @return uint8_t 
+ */
+uint8_t PMS5003::getErrorCode(void) { return pms.getErrorCode(); }
+
+/**
+ * @brief Is sensor connect with device
+ * 
+ * @return true Connected
+ * @return false Removed
+ */
+bool PMS5003::connected(void) { return pms.connected(); }
 
 /**
  * @brief Check device initialized or not
@@ -166,12 +243,26 @@ void PMS5003::end(void) {
  * @brief Check and read PMS sensor data. This method should be callack from
  * loop process to continoue check sensor data if it's available
  */
-void PMS5003::handle(void) { pms.handle(); }
+void PMS5003::handle(void) { pms.readPackage(this->_serial); }
+
+void PMS5003::updateFailCount(void) {
+  pms.updateFailCount();
+}
+
+void PMS5003::resetFailCount(void) {
+  pms.resetFailCount();
+}
 
 /**
- * @brief Get sensor status
+ * @brief Get number of fail count
  * 
- * @return true No problem
- * @return false Communication timeout or sensor has removed
+ * @return int 
  */
-bool PMS5003::isFailed(void) { return pms.isFailed(); }
+int PMS5003::getFailCount(void) { return pms.getFailCount(); }
+
+/**
+ * @brief Get number of fail count max
+ * 
+ * @return int 
+ */
+int PMS5003::getFailCountMax(void) { return pms.getFailCountMax(); }

src/PMS/PMS5003.h

@@ -4,6 +4,9 @@
 #include "../Main/BoardDef.h"
 #include "PMS.h"
 #include "Stream.h"
+#ifdef ESP8266
+#include <SoftwareSerial.h>
+#endif
 
 /**
  * @brief The class define how to handle PMS5003 sensor bas on @ref PMS class
@@ -18,22 +21,43 @@ public:
 #endif
   void end(void);
   void handle(void);
-  bool isFailed(void);
+  void updateFailCount(void);
+  void resetFailCount(void);
+  int getFailCount(void);
+  int getFailCountMax(void);
+  // Atmospheric environment
   int getPm01Ae(void);
   int getPm25Ae(void);
   int getPm10Ae(void);
+  // Standard particle
+  int getPm01Sp(void);
+  int getPm25Sp(void);
+  int getPm10Sp(void);
+  // Particle count
   int getPm03ParticleCount(void);
+  int getPm05ParticleCount(void);
+  int getPm01ParticleCount(void);
+  int getPm25ParticleCount(void);
+  int getPm5ParticleCount(void);
+  int getPm10ParticleCount(void);
+
   int convertPm25ToUsAqi(int pm25);
-  int compensated(int pm25, float humidity);
+  float slrCorrection(float pm25, float pm003Count, float scalingFactor, float intercept);
+  float compensate(float pm25, float humidity);
+  int getFirmwareVersion(void);
+  uint8_t getErrorCode(void);
+  bool connected(void);
 
 private:
   bool _isBegin = false;
+  int _ver;
   BoardType _boardDef;
   PMSBase pms;
   const BoardDef *bsp;
 #if defined(ESP8266)
   Stream *_debugStream;
   const char *TAG = "PMS5003";
+  SoftwareSerial *_serial;
 #else
   HardwareSerial *_serial;
 #endif

src/PMS/PMS5003T.cpp

@@ -67,11 +67,10 @@ bool PMS5003T::begin(void) {
   }
 
 #if defined(ESP8266)
-  bsp->Pms5003.uart_tx_pin;
-  SoftwareSerial *uart =
+  this->_serial =
       new SoftwareSerial(bsp->Pms5003.uart_tx_pin, bsp->Pms5003.uart_rx_pin);
-  uart->begin(9600);
-  if (pms.begin(uart) == false) {
+  this->_serial->begin(9600);
+  if (pms.begin(this->_serial) == false) {
     AgLog("PMS failed");
     return false;
   }
@@ -103,41 +102,83 @@ bool PMS5003T::begin(void) {
     return false;
   }
 #endif
-
+  _ver = pms.getFirmwareVersion();
   this->_isBegin = true;
   return true;
 }
 
 /**
- * @brief Read PM1.0 must call this function after @ref readData success
+ * @brief Read PM1.0
  *
- * @return int PM1.0 index
+ * @return int PM1.0 index (atmospheric environment)
  */
 int PMS5003T::getPm01Ae(void) { return pms.getPM0_1(); }
 
 /**
- * @brief Read PM2.5 must call this function after @ref readData success
+ * @brief Read PM2.5
  *
- * @return int PM2.5 index
+ * @return int PM2.5 index (atmospheric environment)
  */
 int PMS5003T::getPm25Ae(void) { return pms.getPM2_5(); }
 
 /**
- * @brief Read PM10.0 must call this function after @ref readData success
+ * @brief Read PM10.0
  *
- * @return int PM10.0 index
+ * @return int PM10.0 index (atmospheric environment)
  */
 int PMS5003T::getPm10Ae(void) { return pms.getPM10(); }
 
 /**
- * @brief Read PM 0.3 Count must call this function after @ref readData success
+ * @brief Read PM1.0
  *
- * @return int PM 0.3 Count index
+ * @return int PM1.0 index (standard particle)
+ */
+int PMS5003T::getPm01Sp(void) { return pms.getRaw0_1(); }
+
+/**
+ * @brief Read PM2.5
+ *
+ * @return int PM2.5 index (standard particle)
+ */
+int PMS5003T::getPm25Sp(void) { return pms.getRaw2_5(); }
+
+/**
+ * @brief Read PM10
+ *
+ * @return int PM10 index (standard particle)
+ */
+int PMS5003T::getPm10Sp(void) { return pms.getRaw10(); }
+
+/**
+ * @brief Read particle 0.3 count
+ *
+ * @return int particle 0.3 count index
  */
 int PMS5003T::getPm03ParticleCount(void) {
   return pms.getCount0_3();
 }
 
+/**
+ * @brief Read particle 0.5 count
+ *
+ * @return int particle 0.5 count index
+ */
+int PMS5003T::getPm05ParticleCount(void) { return pms.getCount0_5(); }
+
+/**
+ * @brief Read particle 1.0 count
+ *
+ * @return int particle 1.0 count index
+ */
+int PMS5003T::getPm01ParticleCount(void) { return pms.getCount1_0(); }
+
+/**
+ * @brief Read particle 2.5 count
+ *
+ * @return int particle 2.5 count index
+ */
+int PMS5003T::getPm25ParticleCount(void) { return pms.getCount2_5(); }
+
 /**
  * @brief Convert PM2.5 to US AQI
  *
@@ -166,14 +207,36 @@ float PMS5003T::getRelativeHumidity(void) {
 
 /**
  * @brief Correct PM2.5
- * 
+ *
+ * Reference formula: https://www.airgradient.com/documentation/correction-algorithms/
+ *
  * @param pm25 PM2.5 raw value
  * @param humidity Humidity value
- * @return float 
+ * @return compensated value
  */
-float PMS5003T::compensated(int pm25, float humidity) {
-  return pms.compensated(pm25, humidity);
-}
+float PMS5003T::compensate(float pm25, float humidity) { return pms.compensate(pm25, humidity); }
+
+/**
+ * @brief Get module(s) firmware version
+ * 
+ * @return int Version code
+ */
+int PMS5003T::getFirmwareVersion(void) { return _ver; }
+
+/**
+ * @brief Get sensor error code
+ * 
+ * @return uint8_t 
+ */
+uint8_t PMS5003T::getErrorCode(void) { return pms.getErrorCode(); }
+
+/**
+ * @brief Is sensor connect to device
+ * 
+ * @return true Connected
+ * @return false Removed
+ */
+bool PMS5003T::connected(void) { return pms.connected(); }
 
 /**
  * @brief Check device initialized or not
@@ -206,13 +269,26 @@ void PMS5003T::end(void) {
  * @brief Check and read PMS sensor data. This method should be callack from
  * loop process to continoue check sensor data if it's available
  */
-void PMS5003T::handle(void) { pms.handle(); }
+void PMS5003T::handle(void) { pms.readPackage(this->_serial); }
+
+void PMS5003T::updateFailCount(void) {
+  pms.updateFailCount();
+}
+
+void PMS5003T::resetFailCount(void) {
+  pms.resetFailCount();
+}
 
 /**
- * @brief Get sensor status
- *
- * @return true No problem
- * @return false Communication timeout or sensor has removed
+ * @brief Get fail count
+ * 
+ * @return int 
  */
-bool PMS5003T::isFailed(void) { return pms.isFailed(); }
+int PMS5003T::getFailCount(void) { return pms.getFailCount(); }
 
+/**
+ * @brief Get fail count max
+ * 
+ * @return int 
+ */
+int PMS5003T::getFailCountMax(void) { return pms.getFailCountMax(); }

src/PMS/PMS5003T.h

@@ -6,6 +6,9 @@
 #include "PMS5003TBase.h"
 #include "Stream.h"
 #include <HardwareSerial.h>
+#ifdef ESP8266
+#include <SoftwareSerial.h>
+#endif
 
 /**
  * @brief The class define how to handle PMS5003T sensor bas on @ref PMS class
@@ -21,25 +24,43 @@ public:
   void end(void);
 
   void handle(void);
-  bool isFailed(void);
+  void updateFailCount(void);
+  void resetFailCount(void);
+  int getFailCount(void);
+  int getFailCountMax(void);
+  // Atmospheric environment
   int getPm01Ae(void);
   int getPm25Ae(void);
   int getPm10Ae(void);
+  // Standard particle
+  int getPm01Sp(void);
+  int getPm25Sp(void);
+  int getPm10Sp(void);
+  // Particle count
   int getPm03ParticleCount(void);
+  int getPm05ParticleCount(void);
+  int getPm01ParticleCount(void);
+  int getPm25ParticleCount(void);
+
   int convertPm25ToUsAqi(int pm25);
   float getTemperature(void);
   float getRelativeHumidity(void);
-  float compensated(int pm25, float humidity);
+  float compensate(float pm25, float humidity);
+  int getFirmwareVersion(void);
+  uint8_t getErrorCode(void);
+  bool connected(void);
 
 private:
   bool _isBegin = false;
   bool _isSleep = false;
+  int _ver;   /** Firmware version code */
 
   BoardType _boardDef;
   const BoardDef *bsp;
 #if defined(ESP8266)
   Stream *_debugStream;
   const char *TAG = "PMS5003T";
+  SoftwareSerial *_serial;
 #else
   HardwareSerial *_serial;
 #endif

src/PMS/PMS5003TBase.cpp

@@ -4,14 +4,30 @@ PMS5003TBase::PMS5003TBase() {}
 
 PMS5003TBase::~PMS5003TBase() {}
 
-float PMS5003TBase::temperatureCompensated(float temp) {
+/**
+ * @brief Compensate the temperature
+ * 
+ * Reference formula: https://www.airgradient.com/documentation/correction-algorithms/
+ * 
+ * @param temp 
+ * @return * float 
+ */
+float PMS5003TBase::compensateTemp(float temp) {
   if (temp < 10.0f) {
     return temp * 1.327f - 6.738f;
   }
   return temp * 1.181f - 5.113f;
 }
 
-float PMS5003TBase::humidityCompensated(float hum) {
+/**
+ * @brief Compensate the humidity
+ * 
+ * Reference formula: https://www.airgradient.com/documentation/correction-algorithms/
+ * 
+ * @param temp 
+ * @return * float 
+ */
+float PMS5003TBase::compensateHum(float hum) {
   hum = hum * 1.259f + 7.34f;
 
   if (hum > 100.0f) {

src/PMS/PMS5003TBase.h

@@ -8,8 +8,8 @@ private:
 public:
   PMS5003TBase();
   ~PMS5003TBase();
-  float temperatureCompensated(float temp);
-  float humidityCompensated(float hum);
+  float compensateTemp(float temp);
+  float compensateHum(float hum);
 };
 
 #endif