Merge remote-tracking branch 'origin/develop'

Apply PM corrections to all models

docs/local-server.md

@@ -154,11 +154,14 @@ If the monitor is set up on the AirGradient dashboard, it will also receive the
 | `ledBarTestRequested`             | Can be set to trigger a test.                                    | Boolean | `true` : LEDs will run test sequence                                                                                                    | `{"ledBarTestRequested": true}`                 |
 | `noxLearningOffset`               | Set NOx learning gain offset.                                    | Number  | 0-720 (default 12)                                                                                                                      | `{"noxLearningOffset": 12}`                     |
 | `tvocLearningOffset`              | Set VOC learning gain offset.                                    | Number  | 0-720 (default 12)                                                                                                                      | `{"tvocLearningOffset": 12}`                    |
-| `offlineMode`                     | Set monitor to run without WiFi.                                 | Boolean |  `false`: Disabled (default) <br> `true`: Enabled                                                                                       | `{"offlineMode": true}`                         |
 | `monitorDisplayCompensatedValues` | Set the display show the PM value with/without compensate  value (only on [3.1.9]()) | Boolean | `false`: Without compensate (default) <br> `true`: with compensate                                                                      | `{"monitorDisplayCompensatedValues": false }`   |
 | `corrections`                     | Sets correction options to display and measurement values on local server response. (version >= [3.1.11]())    | Object |  _see corrections section_             | _see corrections section_                         |
 
 
+**Notes**
+
+- `offlineMode` : the device will disable all network operation, and only show measurements on the display and ledbar; Read-Only; Change can be apply using reset button on boot.
+- `disableCloudConnection` : disable every request to AirGradient server, means features like post data to AirGradient server, configuration from AirGradient server and automatic firmware updates are disabled. This configuration overrides `configurationControl` and `postDataToAirGradient`; Read-Only; Change can be apply from wifi setup webpage.
 
 ### Corrections
 

examples/BASIC/BASIC.ino

@@ -150,9 +150,12 @@ void setup() {
         initMqtt();
         sendDataToAg();
 
+        if (configuration.getConfigurationControl() !=
+            ConfigurationControl::ConfigurationControlLocal) {
           apiClient.fetchServerConfiguration();
+        }
         configSchedule.update();
-        if (apiClient.isFetchConfigureFailed()) {
+        if (apiClient.isFetchConfigurationFailed()) {
           if (apiClient.isNotAvailableOnDashboard()) {
             stateMachine.displaySetAddToDashBoard();
             stateMachine.displayHandle(
@@ -416,6 +419,14 @@ static void failedHandler(String msg) {
 }
 
 static void configurationUpdateSchedule(void) {
+  if (configuration.isOfflineMode() ||
+      configuration.getConfigurationControl() == ConfigurationControl::ConfigurationControlLocal) {
+    Serial.println("Ignore fetch server configuration. Either mode is offline "
+                   "or configurationControl set to local");
+    apiClient.resetFetchConfigurationStatus();
+    return;
+  }
+
   if (apiClient.fetchServerConfiguration()) {
     configUpdateHandle();
   }
@@ -473,7 +484,7 @@ static void appDispHandler(void) {
   if (configuration.isOfflineMode() == false) {
     if (wifiConnector.isConnected() == false) {
       state = AgStateMachineWiFiLost;
-    } else if (apiClient.isFetchConfigureFailed()) {
+    } else if (apiClient.isFetchConfigurationFailed()) {
       state = AgStateMachineSensorConfigFailed;
       if (apiClient.isNotAvailableOnDashboard()) {
         stateMachine.displaySetAddToDashBoard();
@@ -522,17 +533,21 @@ static void sendDataToServer(void) {
   int bootCount = measurements.bootCount() + 1;
   measurements.setBootCount(bootCount);
 
-  /** Ignore send data to server if postToAirGradient disabled */
+  if (configuration.isOfflineMode() || !configuration.isPostDataToAirGradient()) {
-  if (configuration.isPostDataToAirGradient() == false ||
+    Serial.println("Skipping transmission of data to AG server. Either mode is offline "
-      configuration.isOfflineMode()) {
+                   "or post data to server disabled");
+    return;
+  }
+
+  if (wifiConnector.isConnected() == false) {
+    Serial.println("WiFi not connected, skipping data transmission to AG server");
     return;
   }
 
   String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI());
   if (apiClient.postToServer(syncData)) {
     Serial.println();
-    Serial.println(
+    Serial.println("Online mode and isPostToAirGradient = true");
-        "Online mode and isPostToAirGradient = true: watchdog reset");
     Serial.println();
   }
 }

examples/BASIC/OpenMetrics.cpp

@@ -43,7 +43,7 @@ String OpenMetrics::getPayload(void) {
              "1 if the AirGradient device was able to successfully fetch its "
              "configuration from the server",
              "gauge");
-  add_metric_point("", apiClient.isFetchConfigureFailed() ? "0" : "1");
+  add_metric_point("", apiClient.isFetchConfigurationFailed() ? "0" : "1");
 
   add_metric(
       "post_ok",

examples/DiyProIndoorV3_3/DiyProIndoorV3_3.ino

@@ -150,9 +150,12 @@ void setup() {
         initMqtt();
         sendDataToAg();
 
+        if (configuration.getConfigurationControl() !=
+            ConfigurationControl::ConfigurationControlLocal) {
           apiClient.fetchServerConfiguration();
+        }
         configSchedule.update();
-        if (apiClient.isFetchConfigureFailed()) {
+        if (apiClient.isFetchConfigurationFailed()) {
           if (apiClient.isNotAvailableOnDashboard()) {
             stateMachine.displaySetAddToDashBoard();
             stateMachine.displayHandle(
@@ -468,6 +471,14 @@ static void failedHandler(String msg) {
 }
 
 static void configurationUpdateSchedule(void) {
+  if (configuration.isOfflineMode() ||
+      configuration.getConfigurationControl() == ConfigurationControl::ConfigurationControlLocal) {
+    Serial.println("Ignore fetch server configuration. Either mode is offline "
+                   "or configurationControl set to local");
+    apiClient.resetFetchConfigurationStatus();
+    return;
+  }
+
   if (apiClient.fetchServerConfiguration()) {
     configUpdateHandle();
   }
@@ -525,7 +536,7 @@ static void appDispHandler(void) {
   if (configuration.isOfflineMode() == false) {
     if (wifiConnector.isConnected() == false) {
       state = AgStateMachineWiFiLost;
-    } else if (apiClient.isFetchConfigureFailed()) {
+    } else if (apiClient.isFetchConfigurationFailed()) {
       state = AgStateMachineSensorConfigFailed;
       if (apiClient.isNotAvailableOnDashboard()) {
         stateMachine.displaySetAddToDashBoard();
@@ -574,17 +585,21 @@ static void sendDataToServer(void) {
   int bootCount = measurements.bootCount() + 1;
   measurements.setBootCount(bootCount);
 
-  /** Ignore send data to server if postToAirGradient disabled */
+  if (configuration.isOfflineMode() || !configuration.isPostDataToAirGradient()) {
-  if (configuration.isPostDataToAirGradient() == false ||
+    Serial.println("Skipping transmission of data to AG server. Either mode is offline "
-      configuration.isOfflineMode()) {
+                   "or post data to server disabled");
+    return;
+  }
+
+  if (wifiConnector.isConnected() == false) {
+    Serial.println("WiFi not connected, skipping data transmission to AG server");
     return;
   }
 
   String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI());
   if (apiClient.postToServer(syncData)) {
     Serial.println();
-    Serial.println(
+    Serial.println("Online mode and isPostToAirGradient = true");
-        "Online mode and isPostToAirGradient = true: watchdog reset");
     Serial.println();
   }
 }

examples/DiyProIndoorV3_3/OpenMetrics.cpp

@@ -43,7 +43,7 @@ String OpenMetrics::getPayload(void) {
              "1 if the AirGradient device was able to successfully fetch its "
              "configuration from the server",
              "gauge");
-  add_metric_point("", apiClient.isFetchConfigureFailed() ? "0" : "1");
+  add_metric_point("", apiClient.isFetchConfigurationFailed() ? "0" : "1");
 
   add_metric(
       "post_ok",

examples/DiyProIndoorV4_2/DiyProIndoorV4_2.ino

@@ -177,9 +177,12 @@ void setup() {
         initMqtt();
         sendDataToAg();
 
+        if (configuration.getConfigurationControl() !=
+            ConfigurationControl::ConfigurationControlLocal) {
           apiClient.fetchServerConfiguration();
+        }
         configSchedule.update();
-        if (apiClient.isFetchConfigureFailed()) {
+        if (apiClient.isFetchConfigurationFailed()) {
           if (apiClient.isNotAvailableOnDashboard()) {
             stateMachine.displaySetAddToDashBoard();
             stateMachine.displayHandle(
@@ -508,6 +511,14 @@ static void failedHandler(String msg) {
 }
 
 static void configurationUpdateSchedule(void) {
+  if (configuration.isOfflineMode() ||
+      configuration.getConfigurationControl() == ConfigurationControl::ConfigurationControlLocal) {
+    Serial.println("Ignore fetch server configuration. Either mode is offline "
+                   "or configurationControl set to local");
+    apiClient.resetFetchConfigurationStatus();
+    return;
+  }
+
   if (apiClient.fetchServerConfiguration()) {
     configUpdateHandle();
   }
@@ -565,7 +576,7 @@ static void appDispHandler(void) {
   if (configuration.isOfflineMode() == false) {
     if (wifiConnector.isConnected() == false) {
       state = AgStateMachineWiFiLost;
-    } else if (apiClient.isFetchConfigureFailed()) {
+    } else if (apiClient.isFetchConfigurationFailed()) {
       state = AgStateMachineSensorConfigFailed;
       if (apiClient.isNotAvailableOnDashboard()) {
         stateMachine.displaySetAddToDashBoard();
@@ -615,17 +626,21 @@ static void sendDataToServer(void) {
   int bootCount = measurements.bootCount() + 1;
   measurements.setBootCount(bootCount);
 
-  /** Ignore send data to server if postToAirGradient disabled */
+  if (configuration.isOfflineMode() || !configuration.isPostDataToAirGradient()) {
-  if (configuration.isPostDataToAirGradient() == false ||
+    Serial.println("Skipping transmission of data to AG server. Either mode is offline "
-      configuration.isOfflineMode()) {
+                   "or post data to server disabled");
+    return;
+  }
+
+  if (wifiConnector.isConnected() == false) {
+    Serial.println("WiFi not connected, skipping data transmission to AG server");
     return;
   }
 
   String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI());
   if (apiClient.postToServer(syncData)) {
     Serial.println();
-    Serial.println(
+    Serial.println("Online mode and isPostToAirGradient = true");
-        "Online mode and isPostToAirGradient = true: watchdog reset");
     Serial.println();
   }
 }

examples/DiyProIndoorV4_2/OpenMetrics.cpp

@@ -43,7 +43,7 @@ String OpenMetrics::getPayload(void) {
              "1 if the AirGradient device was able to successfully fetch its "
              "configuration from the server",
              "gauge");
-  add_metric_point("", apiClient.isFetchConfigureFailed() ? "0" : "1");
+  add_metric_point("", apiClient.isFetchConfigurationFailed() ? "0" : "1");
 
   add_metric(
       "post_ok",

examples/OneOpenAir/OneOpenAir.ino

@@ -96,6 +96,7 @@ static bool ledBarButtonTest = false;
 static String fwNewVersion;
 
 static void boardInit(void);
+static void initializeNetwork(void);
 static void failedHandler(String msg);
 static void configurationUpdateSchedule(void);
 static void updateDisplayAndLedBar(void);
@@ -111,7 +112,7 @@ static void factoryConfigReset(void);
 static void wdgFeedUpdate(void);
 static void ledBarEnabledUpdate(void);
 static bool sgp41Init(void);
-static void firmwareCheckForUpdate(void);
+static void checkForFirmwareUpdate(void);
 static void otaHandlerCallback(OtaHandler::OtaState state, String mesasge);
 static void displayExecuteOta(OtaHandler::OtaState state, String msg, int processing);
 static int calculateMaxPeriod(int updateInterval);
@@ -126,7 +127,7 @@ AgSchedule pmsSchedule(SENSOR_PM_UPDATE_INTERVAL, updatePm);
 AgSchedule tempHumSchedule(SENSOR_TEMP_HUM_UPDATE_INTERVAL, tempHumUpdate);
 AgSchedule tvocSchedule(SENSOR_TVOC_UPDATE_INTERVAL, updateTvoc);
 AgSchedule watchdogFeedSchedule(60000, wdgFeedUpdate);
-AgSchedule checkForUpdateSchedule(FIRMWARE_CHECK_FOR_UPDATE_MS, firmwareCheckForUpdate);
+AgSchedule checkForUpdateSchedule(FIRMWARE_CHECK_FOR_UPDATE_MS, checkForFirmwareUpdate);
 
 void setup() {
   /** Serial for print debug message */
@@ -209,51 +210,11 @@ void setup() {
     connectToWifi = true;
   }
 
+  // Initialize networking configuration
   if (connectToWifi) {
-    apiClient.begin();
+    initializeNetwork();
+  }
 
-    if (wifiConnector.connect()) {
-      if (wifiConnector.isConnected()) {
-        mdnsInit();
-        localServer.begin();
-        initMqtt();
-        sendDataToAg();
-
-        #ifdef ESP8266
-          // ota not supported
-        #else
-          firmwareCheckForUpdate();
-          checkForUpdateSchedule.update();
-        #endif
-
-        apiClient.fetchServerConfiguration();
-        configSchedule.update();
-        if (apiClient.isFetchConfigureFailed()) {
-          if (ag->isOne()) {
-            if (apiClient.isNotAvailableOnDashboard()) {
-              stateMachine.displaySetAddToDashBoard();
-              stateMachine.displayHandle(
-                  AgStateMachineWiFiOkServerOkSensorConfigFailed);
-            } else {
-              stateMachine.displayClearAddToDashBoard();
-            }
-          }
-          stateMachine.handleLeds(
-              AgStateMachineWiFiOkServerOkSensorConfigFailed);
-          delay(DISPLAY_DELAY_SHOW_CONTENT_MS);
-        } else {
-          ledBarEnabledUpdate();
-        }
-      } else {
-        if (wifiConnector.isConfigurePorttalTimeout()) {
-          oledDisplay.showRebooting();
-          delay(2500);
-          oledDisplay.setText("", "", "");
-          ESP.restart();
-        }
-      }
-    }
-  }
   /** Set offline mode without saving, cause wifi is not configured */
   if (wifiConnector.hasConfigurated() == false) {
     Serial.println("Set offline mode cause wifi is not configurated");
@@ -269,15 +230,16 @@ void setup() {
     oledDisplay.setBrightness(configuration.getDisplayBrightness());
   }
 
-  // Update display and led bar after finishing setup to show dashboard
+  // Reset post schedulers to make sure measurements value already available
-  updateDisplayAndLedBar();
+  agApiPostSchedule.update();
 }
 
 void loop() {
-  /** Handle schedule */
+  /** Run schedulers */
   dispLedSchedule.run();
   configSchedule.run();
   agApiPostSchedule.run();
+  watchdogFeedSchedule.run();
 
   if (configuration.hasSensorS8) {
     co2Schedule.run();
@@ -311,15 +273,13 @@ void loop() {
     }
   }
 
-  watchdogFeedSchedule.run();
-
   /** Check for handle WiFi reconnect */
   wifiConnector.handle();
 
   /** factory reset handle */
   factoryConfigReset();
 
-  /** check that local configura changed then do some action */
+  /** check that local configuration changed then do some action */
   configUpdateHandle();
 
   /** Firmware check for update handle */
@@ -504,17 +464,23 @@ static bool sgp41Init(void) {
   return false;
 }
 
-static void firmwareCheckForUpdate(void) {
+static void checkForFirmwareUpdate(void) {
   Serial.println();
-  Serial.println("firmwareCheckForUpdate:");
+  Serial.print("checkForFirmwareUpdate: ");
 
-  if (wifiConnector.isConnected()) {
+  if (configuration.isOfflineMode() || configuration.isCloudConnectionDisabled()) {
-    Serial.println("firmwareCheckForUpdate: Perform");
+    Serial.println("mode is offline or cloud connection disabled, ignored");
+    return;
+  }
+  
+  if (!wifiConnector.isConnected()) {
+    Serial.println("wifi not connected, ignored");
+    return;
+  }
+
+  Serial.println("perform");
   otaHandler.setHandlerCallback(otaHandlerCallback);
   otaHandler.updateFirmwareIfOutdated(ag->deviceId());
-  } else {
-    Serial.println("firmwareCheckForUpdate: Ignored");
-  }
   Serial.println();
 }
 
@@ -647,7 +613,7 @@ static void sendDataToAg() {
     }
     stateMachine.handleLeds(AgStateMachineWiFiOkServerConnectFailed);
   }
-  delay(DISPLAY_DELAY_SHOW_CONTENT_MS);
+
   stateMachine.handleLeds(AgStateMachineNormal);
 }
 
@@ -871,7 +837,82 @@ static void failedHandler(String msg) {
   }
 }
 
+void initializeNetwork() {
+  if (!wifiConnector.connect()) {
+    Serial.println("Cannot initiate wifi connection");
+    return;
+  }
+
+  if (!wifiConnector.isConnected()) {
+    Serial.println("Failed connect to WiFi");
+    if (wifiConnector.isConfigurePorttalTimeout()) {
+      oledDisplay.showRebooting();
+      delay(2500);
+      oledDisplay.setText("", "", "");
+      ESP.restart();
+    }
+
+    // Directly return because the rest of the function applied if wifi is connect only
+    return;
+  }
+
+  // Initiate local network configuration
+  mdnsInit();
+  localServer.begin();
+  // Apply mqtt connection if configured
+  initMqtt();
+
+  // Ignore the rest if cloud connection to AirGradient is disabled
+  if (configuration.isCloudConnectionDisabled()) {
+    return;
+  }
+
+  // Initialize api client
+  apiClient.begin();
+
+  // Send data for the first time to AG server at boot 
+  sendDataToAg();
+
+// OTA check
+#ifdef ESP8266
+// ota not supported
+#else
+  checkForFirmwareUpdate();
+  checkForUpdateSchedule.update();
+#endif
+
+  apiClient.fetchServerConfiguration();
+  configSchedule.update();
+  if (apiClient.isFetchConfigurationFailed()) {
+    if (ag->isOne()) {
+      if (apiClient.isNotAvailableOnDashboard()) {
+        stateMachine.displaySetAddToDashBoard();
+        stateMachine.displayHandle(AgStateMachineWiFiOkServerOkSensorConfigFailed);
+      } else {
+        stateMachine.displayClearAddToDashBoard();
+      }
+    }
+    stateMachine.handleLeds(AgStateMachineWiFiOkServerOkSensorConfigFailed);
+    delay(DISPLAY_DELAY_SHOW_CONTENT_MS);
+  } else {
+    ledBarEnabledUpdate();
+  }
+}
+
 static void configurationUpdateSchedule(void) {
+  if (configuration.isOfflineMode() || configuration.isCloudConnectionDisabled() ||
+      configuration.getConfigurationControl() == ConfigurationControl::ConfigurationControlLocal) {
+    Serial.println("Ignore fetch server configuration. Either mode is offline or cloud connection "
+                   "disabled or configurationControl set to local");
+    apiClient.resetFetchConfigurationStatus();
+    return;
+  }
+
+  if (wifiConnector.isConnected() == false) {
+    Serial.println(" WiFi not connected, skipping fetch configuration from AG server");
+    return;
+  }
+
   if (apiClient.fetchServerConfiguration()) {
     configUpdateHandle();
   }
@@ -969,10 +1010,21 @@ static void updateDisplayAndLedBar(void) {
     return;
   }
 
-  AgStateMachineState state = AgStateMachineNormal;
   if (wifiConnector.isConnected() == false) {
-    state = AgStateMachineWiFiLost;
+    stateMachine.displayHandle(AgStateMachineWiFiLost);
-  } else if (apiClient.isFetchConfigureFailed()) {
+    stateMachine.handleLeds(AgStateMachineWiFiLost);
+    return;
+  }
+
+  if (configuration.isCloudConnectionDisabled()) {
+    // Ignore API related check since cloud is disabled 
+    stateMachine.displayHandle(AgStateMachineNormal);
+    stateMachine.handleLeds(AgStateMachineNormal);
+    return;
+  }
+
+  AgStateMachineState state = AgStateMachineNormal;
+  if (apiClient.isFetchConfigurationFailed()) {
     state = AgStateMachineSensorConfigFailed;
     if (apiClient.isNotAvailableOnDashboard()) {
       stateMachine.displaySetAddToDashBoard();
@@ -1140,16 +1192,22 @@ static void sendDataToServer(void) {
   int bootCount = measurements.bootCount() + 1;
   measurements.setBootCount(bootCount);
 
-  /** Ignore send data to server if postToAirGradient disabled */
+  if (configuration.isOfflineMode() || configuration.isCloudConnectionDisabled() ||
-  if (configuration.isPostDataToAirGradient() == false || configuration.isOfflineMode()) {
+      !configuration.isPostDataToAirGradient()) {
+    Serial.println("Skipping transmission of data to AG server. Either mode is offline or cloud connection is "
+                   "disabled or post data to server disabled");
+    return;
+  }
+
+  if (wifiConnector.isConnected() == false) {
+    Serial.println("WiFi not connected, skipping data transmission to AG server");
     return;
   }
 
   String syncData = measurements.toString(false, fwMode, wifiConnector.RSSI());
   if (apiClient.postToServer(syncData)) {
     Serial.println();
-    Serial.println(
+    Serial.println("Online mode and isPostToAirGradient = true");
-        "Online mode and isPostToAirGradient = true: watchdog reset");
     Serial.println();
   }
 

examples/OneOpenAir/OpenMetrics.cpp

@@ -43,7 +43,7 @@ String OpenMetrics::getPayload(void) {
              "1 if the AirGradient device was able to successfully fetch its "
              "configuration from the server",
              "gauge");
-  add_metric_point("", apiClient.isFetchConfigureFailed() ? "0" : "1");
+  add_metric_point("", apiClient.isFetchConfigurationFailed() ? "0" : "1");
 
   add_metric(
       "post_ok",

library.properties

@@ -1,5 +1,5 @@
 name=AirGradient Air Quality Sensor
-version=3.1.21
+version=3.2.0
 author=AirGradient <support@airgradient.com>
 maintainer=AirGradient <support@airgradient.com>
 sentence=ESP32-C3 / ESP8266 library for air quality monitor measuring PM, CO2, Temperature, TVOC and Humidity with OLED display.

src/AgApiClient.cpp

@@ -34,17 +34,6 @@ void AgApiClient::begin(void) {
  * @return false Failure
  */
 bool AgApiClient::fetchServerConfiguration(void) {
-  if (config.getConfigurationControl() ==
-          ConfigurationControl::ConfigurationControlLocal ||
-      config.isOfflineMode()) {
-    logWarning("Ignore fetch server configuration");
-
-    // Clear server configuration failed flag, cause it's ignore but not
-    // really failed
-    getConfigFailed = false;
-    return false;
-  }
-
   String uri = apiRoot + "/sensors/airgradient:" +
                ag->deviceId() + "/one/config";
 
@@ -58,7 +47,8 @@ bool AgApiClient::fetchServerConfiguration(void) {
   }
 #else
   HTTPClient client;
-  client.setTimeout(timeoutMs);
+  client.setConnectTimeout(timeoutMs); // Set timeout when establishing connection to server 
+  client.setTimeout(timeoutMs); // Timeout when waiting for response from AG server
   if (apiRootChanged) {
     // If apiRoot is changed, assume not using https
     if (client.begin(uri) == false) {
@@ -114,15 +104,6 @@ bool AgApiClient::fetchServerConfiguration(void) {
  * @return false Failure
  */
 bool AgApiClient::postToServer(String data) {
-  if (config.isPostDataToAirGradient() == false) {
-    logWarning("Ignore post data to server");
-    return true;
-  }
-
-  if (WiFi.isConnected() == false) {
-    return false;
-  }
-
   String uri = apiRoot + "/sensors/airgradient:" + ag->deviceId() + "/measures";
 #ifdef ESP8266
   HTTPClient client;
@@ -133,7 +114,8 @@ bool AgApiClient::postToServer(String data) {
   }
 #else
   HTTPClient client;
-  client.setTimeout(timeoutMs);
+  client.setConnectTimeout(timeoutMs); // Set timeout when establishing connection to server 
+  client.setTimeout(timeoutMs); // Timeout when waiting for response from AG server
   if (apiRootChanged) {
     // If apiRoot is changed, assume not using https
     if (client.begin(uri) == false) {
@@ -173,7 +155,12 @@ bool AgApiClient::postToServer(String data) {
  * @return true Success
  * @return false Failure
  */
-bool AgApiClient::isFetchConfigureFailed(void) { return getConfigFailed; }
+bool AgApiClient::isFetchConfigurationFailed(void) { return getConfigFailed; }
+
+/**
+ * @brief Reset status of get configuration from AirGradient cloud
+ */
+void AgApiClient::resetFetchConfigurationStatus(void) { getConfigFailed = false; }
 
 /**
  * @brief Get failed status when post data to AirGradient cloud

src/AgApiClient.h

@@ -31,7 +31,7 @@ private:
   bool getConfigFailed;
   bool postToServerFailed;
   bool notAvailableOnDashboard = false; // Device not setup on Airgradient cloud dashboard.
-  uint16_t timeoutMs = 10000;           // Default set to 10s
+  uint16_t timeoutMs = 15000;           // Default set to 15s
 
 public:
   AgApiClient(Stream &stream, Configuration &config);
@@ -40,7 +40,8 @@ public:
   void begin(void);
   bool fetchServerConfiguration(void);
   bool postToServer(String data);
-  bool isFetchConfigureFailed(void);
+  bool isFetchConfigurationFailed(void);
+  void resetFetchConfigurationStatus(void);
   bool isPostToServerFailed(void);
   bool isNotAvailableOnDashboard(void);
   void setAirGradient(AirGradient *ag);

src/AgConfigure.cpp

@@ -22,15 +22,10 @@ const char *LED_BAR_MODE_NAMES[] = {
 };
 
 const char *PM_CORRECTION_ALGORITHM_NAMES[] = {
-    [Unknown] = "-", // This is only to pass "non-trivial designated initializers" error
+    [COR_ALGO_PM_UNKNOWN] = "-", // This is only to pass "non-trivial designated initializers" error
-    [None] = "none",
+    [COR_ALGO_PM_NONE] = "none",
-    [EPA_2021] = "epa_2021",
+    [COR_ALGO_PM_EPA_2021] = "epa_2021",
-    [SLR_PMS5003_20220802] = "slr_PMS5003_20220802",
+    [COR_ALGO_PM_SLR_CUSTOM] = "custom",
-    [SLR_PMS5003_20220803] = "slr_PMS5003_20220803",
-    [SLR_PMS5003_20220824] = "slr_PMS5003_20220824",
-    [SLR_PMS5003_20231030] = "slr_PMS5003_20231030",
-    [SLR_PMS5003_20231218] = "slr_PMS5003_20231218",
-    [SLR_PMS5003_20240104] = "slr_PMS5003_20240104",
 };
 
 const char *TEMP_HUM_CORRECTION_ALGORITHM_NAMES[] = {
@@ -54,6 +49,7 @@ JSON_PROP_DEF(mqttBrokerUrl);
 JSON_PROP_DEF(temperatureUnit);
 JSON_PROP_DEF(configurationControl);
 JSON_PROP_DEF(postDataToAirGradient);
+JSON_PROP_DEF(disableCloudConnection);
 JSON_PROP_DEF(ledBarBrightness);
 JSON_PROP_DEF(displayBrightness);
 JSON_PROP_DEF(co2CalibrationRequested);
@@ -75,6 +71,7 @@ JSON_PROP_DEF(rhum);
 #define jprop_temperatureUnit_default                 "c"
 #define jprop_configurationControl_default            String(CONFIGURATION_CONTROL_NAME[ConfigurationControl::ConfigurationControlBoth])
 #define jprop_postDataToAirGradient_default           true
+#define jprop_disableCloudConnection_default          false
 #define jprop_ledBarBrightness_default                100
 #define jprop_displayBrightness_default               100
 #define jprop_offlineMode_default                     false
@@ -113,8 +110,8 @@ PMCorrectionAlgorithm Configuration::matchPmAlgorithm(String algorithm) {
   // If the input string matches an algorithm name, return the corresponding enum value
   // Else return Unknown
 
-  const size_t enumSize = SLR_PMS5003_20240104 + 1; // Get the actual size of the enum
+  const size_t enumSize = COR_ALGO_PM_SLR_CUSTOM + 1; // Get the actual size of the enum
-  PMCorrectionAlgorithm result = PMCorrectionAlgorithm::Unknown;
+  PMCorrectionAlgorithm result = COR_ALGO_PM_UNKNOWN;;
   
   // Loop through enum values
   for (size_t enumVal = 0; enumVal < enumSize; enumVal++) {
@@ -123,6 +120,15 @@ PMCorrectionAlgorithm Configuration::matchPmAlgorithm(String algorithm) {
     }
   }
 
+  // If string not match from enum, check if correctionAlgorithm is one of the PM batch corrections 
+  if (result == COR_ALGO_PM_UNKNOWN) {
+    // Check the substring "slr_PMS5003_xxxxxxxx"
+    if (algorithm.substring(0, 11) == "slr_PMS5003") {
+      // If it is, then its a custom correction
+      result = COR_ALGO_PM_SLR_CUSTOM;
+    }
+  }
+
   return result;
 }
 
@@ -143,36 +149,34 @@ TempHumCorrectionAlgorithm Configuration::matchTempHumAlgorithm(String algorithm
 
 bool Configuration::updatePmCorrection(JSONVar &json) {
   if (!json.hasOwnProperty("corrections")) {
-    Serial.println("corrections not found");
+    logInfo("corrections not found");
     return false;
   }
 
   JSONVar corrections = json["corrections"];
   if (!corrections.hasOwnProperty("pm02")) {
-    Serial.println("pm02 not found");
+    logWarning("pm02 not found");
     return false;
   }
 
   JSONVar pm02 = corrections["pm02"];
   if (!pm02.hasOwnProperty("correctionAlgorithm")) {
-    Serial.println("correctionAlgorithm not found");
+    logWarning("pm02 correctionAlgorithm not found");
     return false;
   }
 
-  // TODO: Need to have data type check, with error message response if invalid 
-
   // Check algorithm
   String algorithm = pm02["correctionAlgorithm"];
   PMCorrectionAlgorithm algo = matchPmAlgorithm(algorithm);
-  if (algo == Unknown) {
+  if (algo == COR_ALGO_PM_UNKNOWN) {
-    logInfo("Unknown algorithm");
+    logWarning("Unknown algorithm");
     return false;
   }
   logInfo("Correction algorithm: " + algorithm);
 
   // If algo is None or EPA_2021, no need to check slr
   // But first check if pmCorrection different from algo
-  if (algo == None || algo == EPA_2021) {
+  if (algo == COR_ALGO_PM_NONE || algo == COR_ALGO_PM_EPA_2021) {
     if (pmCorrection.algorithm != algo) {
       // Deep copy corrections from root to jconfig, so it will be saved later
       jconfig[jprop_corrections]["pm02"]["correctionAlgorithm"] = algorithm;
@@ -189,7 +193,7 @@ bool Configuration::updatePmCorrection(JSONVar &json) {
 
   // Check if pm02 has slr object
   if (!pm02.hasOwnProperty("slr")) {
-    Serial.println("slr not found");
+    logWarning("slr not found");
     return false;
   }
 
@@ -198,7 +202,7 @@ bool Configuration::updatePmCorrection(JSONVar &json) {
   // Validate required slr properties exist
   if (!slr.hasOwnProperty("intercept") || !slr.hasOwnProperty("scalingFactor") ||
       !slr.hasOwnProperty("useEpa2021")) {
-    Serial.println("Missing required slr properties");
+    logWarning("Missing required slr properties");
     return false;
   }
 
@@ -236,7 +240,6 @@ bool Configuration::updateTempHumCorrection(JSONVar &json, TempHumCorrection &ta
 
   JSONVar corrections = json[jprop_corrections];
   if (!corrections.hasOwnProperty(correctionName)) {
-    Serial.println("pm02 not found");
     logWarning(String(correctionName) + " correction field not found on configuration");
     return false;
   }
@@ -377,6 +380,7 @@ void Configuration::defaultConfig(void) {
   jconfig[jprop_configurationControl] = jprop_configurationControl_default;
   jconfig[jprop_pmStandard] = jprop_pmStandard_default;
   jconfig[jprop_temperatureUnit] = jprop_temperatureUnit_default;
+  jconfig[jprop_disableCloudConnection] = jprop_disableCloudConnection_default;
   jconfig[jprop_postDataToAirGradient] = jprop_postDataToAirGradient_default;
   if (ag->isOne()) {
     jconfig[jprop_ledBarBrightness] = jprop_ledBarBrightness_default;
@@ -394,8 +398,8 @@ void Configuration::defaultConfig(void) {
   jconfig[jprop_offlineMode] = jprop_offlineMode_default;
   jconfig[jprop_monitorDisplayCompensatedValues] = jprop_monitorDisplayCompensatedValues_default;
 
-  // PM2.5 correction
+  // PM2.5 default correction
-  pmCorrection.algorithm = None;
+  pmCorrection.algorithm = COR_ALGO_PM_NONE;
   pmCorrection.changed = false;
   pmCorrection.intercept = 0;
   pmCorrection.scalingFactor = 1;
@@ -1151,20 +1155,20 @@ void Configuration::toConfig(const char *buf) {
   }
 
   bool changed = false;
-  bool isInvalid = false;
+  bool isConfigFieldInvalid = false;
 
   /** Validate country */
   if (JSON.typeof_(jconfig[jprop_country]) != "string") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
     String country = jconfig[jprop_country];
     if (country.length() != 2) {
-      isInvalid = true;
+      isConfigFieldInvalid = true;
     } else {
-      isInvalid = false;
+      isConfigFieldInvalid = false;
     }
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_country] = jprop_country_default;
     changed = true;
     logInfo("toConfig: country changed");
@@ -1172,17 +1176,17 @@ void Configuration::toConfig(const char *buf) {
 
   /** validate: PM standard */
   if (JSON.typeof_(jconfig[jprop_pmStandard]) != "string") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
     String standard = jconfig[jprop_pmStandard];
     if (standard != getPMStandardString(true) &&
         standard != getPMStandardString(false)) {
-      isInvalid = true;
+      isConfigFieldInvalid = true;
     } else {
-      isInvalid = false;
+      isConfigFieldInvalid = false;
     }
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_pmStandard] = jprop_pmStandard_default;
     changed = true;
     logInfo("toConfig: pmStandard changed");
@@ -1190,18 +1194,18 @@ void Configuration::toConfig(const char *buf) {
 
   /** validate led bar mode */
   if (JSON.typeof_(jconfig[jprop_ledBarMode]) != "string") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
     String mode = jconfig[jprop_ledBarMode];
     if (mode != getLedBarModeName(LedBarMode::LedBarModeCO2) &&
         mode != getLedBarModeName(LedBarMode::LedBarModeOff) &&
         mode != getLedBarModeName(LedBarMode::LedBarModePm)) {
-      isInvalid = true;
+      isConfigFieldInvalid = true;
     } else {
-      isInvalid = false;
+      isConfigFieldInvalid = false;
     }
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_ledBarMode] = jprop_ledBarMode_default;
     changed = true;
     logInfo("toConfig: ledBarMode changed");
@@ -1209,11 +1213,11 @@ void Configuration::toConfig(const char *buf) {
 
   /** validate abcday */
   if (JSON.typeof_(jconfig[jprop_abcDays]) != "number") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
-    isInvalid = false;
+    isConfigFieldInvalid = false;
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_abcDays] = jprop_abcDays_default;
     changed = true;
     logInfo("toConfig: abcDays changed");
@@ -1221,16 +1225,16 @@ void Configuration::toConfig(const char *buf) {
 
   /** validate tvoc learning offset */
   if (JSON.typeof_(jconfig[jprop_tvocLearningOffset]) != "number") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
     int value = jconfig[jprop_tvocLearningOffset];
     if (value < 0) {
-      isInvalid = true;
+      isConfigFieldInvalid = true;
     } else {
-      isInvalid = false;
+      isConfigFieldInvalid = false;
     }
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_tvocLearningOffset] = jprop_tvocLearningOffset_default;
     changed = true;
     logInfo("toConfig: tvocLearningOffset changed");
@@ -1238,16 +1242,16 @@ void Configuration::toConfig(const char *buf) {
 
   /** validate nox learning offset */
   if (JSON.typeof_(jconfig[jprop_noxLearningOffset]) != "number") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
     int value = jconfig[jprop_noxLearningOffset];
     if (value < 0) {
-      isInvalid = true;
+      isConfigFieldInvalid = true;
     } else {
-      isInvalid = false;
+      isConfigFieldInvalid = false;
     }
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_noxLearningOffset] = jprop_noxLearningOffset_default;
     changed = true;
     logInfo("toConfig: noxLearningOffset changed");
@@ -1255,11 +1259,11 @@ void Configuration::toConfig(const char *buf) {
 
   /** validate mqtt broker */
   if (JSON.typeof_(jconfig[jprop_mqttBrokerUrl]) != "string") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
-    isInvalid = false;
+    isConfigFieldInvalid = false;
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     changed = true;
     jconfig[jprop_mqttBrokerUrl] = jprop_mqttBrokerUrl_default;
     logInfo("toConfig: mqttBroker changed");
@@ -1267,24 +1271,36 @@ void Configuration::toConfig(const char *buf) {
 
   /** Validate temperature unit */
   if (JSON.typeof_(jconfig[jprop_temperatureUnit]) != "string") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
     String unit = jconfig[jprop_temperatureUnit];
     if (unit != "c" && unit != "f") {
-      isInvalid = true;
+      isConfigFieldInvalid = true;
     } else {
-      isInvalid = false;
+      isConfigFieldInvalid = false;
     }
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_temperatureUnit] = jprop_temperatureUnit_default;
     changed = true;
     logInfo("toConfig: temperatureUnit changed");
   }
 
+  /** validate disableCloudConnection configuration */
+  if (JSON.typeof_(jconfig[jprop_disableCloudConnection]) != "boolean") {
+    isConfigFieldInvalid = true;
+  } else {
+    isConfigFieldInvalid = false;
+  }
+  if (isConfigFieldInvalid) {
+    jconfig[jprop_disableCloudConnection] = jprop_disableCloudConnection_default;
+    changed = true;
+    logInfo("toConfig: disableCloudConnection changed");
+  }
+
   /** validate configuration control */
   if (JSON.typeof_(jprop_configurationControl) != "string") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
     String ctrl = jconfig[jprop_configurationControl];
     if (ctrl != String(CONFIGURATION_CONTROL_NAME
@@ -1293,12 +1309,12 @@ void Configuration::toConfig(const char *buf) {
                            [ConfigurationControl::ConfigurationControlLocal]) &&
         ctrl != String(CONFIGURATION_CONTROL_NAME
                            [ConfigurationControl::ConfigurationControlCloud])) {
-      isInvalid = true;
+      isConfigFieldInvalid = true;
     } else {
-      isInvalid = false;
+      isConfigFieldInvalid = false;
     }
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_configurationControl] =jprop_configurationControl_default;
     changed = true;
     logInfo("toConfig: configurationControl changed");
@@ -1306,11 +1322,11 @@ void Configuration::toConfig(const char *buf) {
 
   /** Validate post to airgradient cloud */
   if (JSON.typeof_(jconfig[jprop_postDataToAirGradient]) != "boolean") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
-    isInvalid = false;
+    isConfigFieldInvalid = false;
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_postDataToAirGradient] = jprop_postDataToAirGradient_default;
     changed = true;
     logInfo("toConfig: postToAirGradient changed");
@@ -1318,16 +1334,16 @@ void Configuration::toConfig(const char *buf) {
 
   /** validate led bar brightness */
   if (JSON.typeof_(jconfig[jprop_ledBarBrightness]) != "number") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
     int value = jconfig[jprop_ledBarBrightness];
     if (value < 0 || value > 100) {
-      isInvalid = true;
+      isConfigFieldInvalid = true;
     } else {
-      isInvalid = false;
+      isConfigFieldInvalid = false;
     }
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_ledBarBrightness] = jprop_ledBarBrightness_default;
     changed = true;
     logInfo("toConfig: ledBarBrightness changed");
@@ -1335,16 +1351,16 @@ void Configuration::toConfig(const char *buf) {
 
   /** Validate display brightness */
   if (JSON.typeof_(jconfig[jprop_displayBrightness]) != "number") {
-    isInvalid = true;
+    isConfigFieldInvalid = true;
   } else {
     int value = jconfig[jprop_displayBrightness];
     if (value < 0 || value > 100) {
-      isInvalid = true;
+      isConfigFieldInvalid = true;
     } else {
-      isInvalid = false;
+      isConfigFieldInvalid = false;
     }
   }
-  if (isInvalid) {
+  if (isConfigFieldInvalid) {
     jconfig[jprop_displayBrightness] = jprop_displayBrightness_default;
     changed = true;
     logInfo("toConfig: displayBrightness changed");
@@ -1365,7 +1381,7 @@ void Configuration::toConfig(const char *buf) {
 
   // PM2.5 correction
   /// Set default first before parsing local config
-  pmCorrection.algorithm = PMCorrectionAlgorithm::None;
+  pmCorrection.algorithm = COR_ALGO_PM_NONE;
   pmCorrection.intercept = 0;
   pmCorrection.scalingFactor = 0;
   pmCorrection.useEPA = false;
@@ -1465,6 +1481,17 @@ void Configuration::setOfflineModeWithoutSave(bool offline) {
   _offlineMode = offline;
 }
 
+bool Configuration::isCloudConnectionDisabled(void) {
+  bool disabled = jconfig[jprop_disableCloudConnection];
+  return disabled;
+}
+
+void Configuration::setDisableCloudConnection(bool disable) {
+  logInfo("Set DisableCloudConnection to " + String(disable ? "True" : "False"));
+  jconfig[jprop_disableCloudConnection] = disable;
+  saveConfig();
+}
+
 bool Configuration::isLedBarModeChanged(void) { 
   bool changed = _ledBarModeChanged;
   _ledBarModeChanged = false;
@@ -1500,8 +1527,8 @@ bool Configuration::isPMCorrectionChanged(void) {
  */
 bool Configuration::isPMCorrectionEnabled(void) {
   PMCorrection pmCorrection = getPMCorrection();
-  if (pmCorrection.algorithm == PMCorrectionAlgorithm::None ||
+  if (pmCorrection.algorithm == COR_ALGO_PM_NONE ||
-      pmCorrection.algorithm == PMCorrectionAlgorithm::Unknown) {
+      pmCorrection.algorithm == COR_ALGO_PM_UNKNOWN) {
     return false;
   }
 

src/AgConfigure.h

@@ -106,6 +106,8 @@ public:
   bool isOfflineMode(void);
   void setOfflineMode(bool offline);
   void setOfflineModeWithoutSave(bool offline);
+  bool isCloudConnectionDisabled(void);
+  void setDisableCloudConnection(bool disable);
   bool isLedBarModeChanged(void);
   bool isMonitorDisplayCompensatedValues(void);
   bool isPMCorrectionChanged(void);

src/AgValue.cpp

@@ -31,6 +31,45 @@ Measurements::Measurements(Configuration &config) : config(config) {
 #ifndef ESP8266
   _resetReason = (int)ESP_RST_UNKNOWN;
 #endif
+  
+  /* Set invalid value for each measurements as default value when initialized*/
+  _temperature[0].update.avg = utils::getInvalidTemperature();
+  _temperature[1].update.avg = utils::getInvalidTemperature();
+  _humidity[0].update.avg = utils::getInvalidHumidity();
+  _humidity[1].update.avg = utils::getInvalidHumidity();
+  _co2.update.avg = utils::getInvalidCO2();
+  _tvoc.update.avg = utils::getInvalidVOC();
+  _tvoc_raw.update.avg = utils::getInvalidVOC();
+  _nox.update.avg = utils::getInvalidNOx();
+  _nox_raw.update.avg = utils::getInvalidNOx();
+
+  _pm_03_pc[0].update.avg = utils::getInvalidPmValue();
+  _pm_03_pc[1].update.avg = utils::getInvalidPmValue();
+  _pm_05_pc[0].update.avg = utils::getInvalidPmValue();
+  _pm_05_pc[1].update.avg = utils::getInvalidPmValue();
+  _pm_5_pc[0].update.avg = utils::getInvalidPmValue();
+  _pm_5_pc[1].update.avg = utils::getInvalidPmValue();
+  
+  _pm_01[0].update.avg = utils::getInvalidPmValue();
+  _pm_01_sp[0].update.avg = utils::getInvalidPmValue();
+  _pm_01_pc[0].update.avg = utils::getInvalidPmValue();
+  _pm_01[1].update.avg = utils::getInvalidPmValue();
+  _pm_01_sp[1].update.avg = utils::getInvalidPmValue();
+  _pm_01_pc[1].update.avg = utils::getInvalidPmValue();
+
+  _pm_25[0].update.avg = utils::getInvalidPmValue();
+  _pm_25_sp[0].update.avg = utils::getInvalidPmValue();
+  _pm_25_pc[0].update.avg = utils::getInvalidPmValue();
+  _pm_25[1].update.avg = utils::getInvalidPmValue();
+  _pm_25_sp[1].update.avg = utils::getInvalidPmValue();
+  _pm_25_pc[1].update.avg = utils::getInvalidPmValue();
+
+  _pm_10[0].update.avg = utils::getInvalidPmValue();
+  _pm_10_sp[0].update.avg = utils::getInvalidPmValue();
+  _pm_10_pc[0].update.avg = utils::getInvalidPmValue();
+  _pm_10[1].update.avg = utils::getInvalidPmValue();
+  _pm_10_sp[1].update.avg = utils::getInvalidPmValue();
+  _pm_10_pc[1].update.avg = utils::getInvalidPmValue();
 }
 
 void Measurements::setAirGradient(AirGradient *ag) { this->ag = ag; }
@@ -600,7 +639,7 @@ float Measurements::getCorrectedTempHum(MeasurementType type, int ch, bool force
   return corrected;
 }
 
-float Measurements::getCorrectedPM25(bool useAvg, int ch) {
+float Measurements::getCorrectedPM25(bool useAvg, int ch, bool forceCorrection) {
   float pm25;
   float corrected;
   float humidity;
@@ -619,12 +658,18 @@ float Measurements::getCorrectedPM25(bool useAvg, int ch) {
 
   Configuration::PMCorrection pmCorrection = config.getPMCorrection();
   switch (pmCorrection.algorithm) {
-  case PMCorrectionAlgorithm::Unknown:
+  case PMCorrectionAlgorithm::COR_ALGO_PM_UNKNOWN:
-  case PMCorrectionAlgorithm::None:
+  case PMCorrectionAlgorithm::COR_ALGO_PM_NONE: {
-    // If correction is Unknown, then default is None
+    // If correction is Unknown or None, then default is None
+    // Unless forceCorrection enabled
+    if (forceCorrection) {
+      corrected = ag->pms5003.compensate(pm25, humidity);
+    } else {
       corrected = pm25;
+    }
     break;
-  case PMCorrectionAlgorithm::EPA_2021:
+  }
+  case PMCorrectionAlgorithm::COR_ALGO_PM_EPA_2021:
     corrected = ag->pms5003.compensate(pm25, humidity);
     break;
   default: {
@@ -741,8 +786,8 @@ JSONVar Measurements::buildIndoor(bool localServer) {
     // buildPMS params:
     /// PMS channel 1 (indoor only have 1 PMS; hence allCh false)
     /// Not include temperature and humidity from PMS sensor
-    /// Not include compensated calculation
+    /// Include compensated calculation
-    indoor = buildPMS(1, false, false, false);
+    indoor = buildPMS(1, false, false, true);
     if (!localServer) {
       // Indoor is using PMS5003
       indoor[json_prop_pmFirmware] = this->pms5003FirmwareVersion(ag->pms5003.getFirmwareVersion());
@@ -766,15 +811,6 @@ JSONVar Measurements::buildIndoor(bool localServer) {
     }
   }
 
-  // Add pm25 compensated value only if PM2.5 and humidity value is valid
-  if (config.hasSensorPMS1 && utils::isValidPm(_pm_25[0].update.avg)) {
-    if (config.hasSensorSHT && utils::isValidHumidity(_humidity[0].update.avg)) {
-      // Correction using moving average value
-      float tmp = getCorrectedPM25(true);
-      indoor[json_prop_pm25Compensated] = ag->round2(tmp);
-    }
-  }
-
   return indoor;
 }
 
@@ -787,58 +823,58 @@ JSONVar Measurements::buildPMS(int ch, bool allCh, bool withTempHum, bool compen
     validateChannel(ch);
 
     // Follow array indexing just for get address of the value type
-    ch = ch - 1;
+    int chIndex = ch - 1;
 
-    if (utils::isValidPm(_pm_01[ch].update.avg)) {
+    if (utils::isValidPm(_pm_01[chIndex].update.avg)) {
-      pms[json_prop_pm01Ae] = ag->round2(_pm_01[ch].update.avg);
+      pms[json_prop_pm01Ae] = ag->round2(_pm_01[chIndex].update.avg);
     }
-    if (utils::isValidPm(_pm_25[ch].update.avg)) {
+    if (utils::isValidPm(_pm_25[chIndex].update.avg)) {
-      pms[json_prop_pm25Ae] = ag->round2(_pm_25[ch].update.avg);
+      pms[json_prop_pm25Ae] = ag->round2(_pm_25[chIndex].update.avg);
     }
-    if (utils::isValidPm(_pm_10[ch].update.avg)) {
+    if (utils::isValidPm(_pm_10[chIndex].update.avg)) {
-      pms[json_prop_pm10Ae] = ag->round2(_pm_10[ch].update.avg);
+      pms[json_prop_pm10Ae] = ag->round2(_pm_10[chIndex].update.avg);
     }
-    if (utils::isValidPm(_pm_01_sp[ch].update.avg)) {
+    if (utils::isValidPm(_pm_01_sp[chIndex].update.avg)) {
-      pms[json_prop_pm01Sp] = ag->round2(_pm_01_sp[ch].update.avg);
+      pms[json_prop_pm01Sp] = ag->round2(_pm_01_sp[chIndex].update.avg);
     }
-    if (utils::isValidPm(_pm_25_sp[ch].update.avg)) {
+    if (utils::isValidPm(_pm_25_sp[chIndex].update.avg)) {
-      pms[json_prop_pm25Sp] = ag->round2(_pm_25_sp[ch].update.avg);
+      pms[json_prop_pm25Sp] = ag->round2(_pm_25_sp[chIndex].update.avg);
     }
-    if (utils::isValidPm(_pm_10_sp[ch].update.avg)) {
+    if (utils::isValidPm(_pm_10_sp[chIndex].update.avg)) {
-      pms[json_prop_pm10Sp] = ag->round2(_pm_10_sp[ch].update.avg);
+      pms[json_prop_pm10Sp] = ag->round2(_pm_10_sp[chIndex].update.avg);
     }
-    if (utils::isValidPm03Count(_pm_03_pc[ch].update.avg)) {
+    if (utils::isValidPm03Count(_pm_03_pc[chIndex].update.avg)) {
-      pms[json_prop_pm03Count] = ag->round2(_pm_03_pc[ch].update.avg);
+      pms[json_prop_pm03Count] = ag->round2(_pm_03_pc[chIndex].update.avg);
     }
-    if (utils::isValidPm03Count(_pm_05_pc[ch].update.avg)) {
+    if (utils::isValidPm03Count(_pm_05_pc[chIndex].update.avg)) {
-      pms[json_prop_pm05Count] = ag->round2(_pm_05_pc[ch].update.avg);
+      pms[json_prop_pm05Count] = ag->round2(_pm_05_pc[chIndex].update.avg);
     }
-    if (utils::isValidPm03Count(_pm_01_pc[ch].update.avg)) {
+    if (utils::isValidPm03Count(_pm_01_pc[chIndex].update.avg)) {
-      pms[json_prop_pm1Count] = ag->round2(_pm_01_pc[ch].update.avg);
+      pms[json_prop_pm1Count] = ag->round2(_pm_01_pc[chIndex].update.avg);
     }
-    if (utils::isValidPm03Count(_pm_25_pc[ch].update.avg)) {
+    if (utils::isValidPm03Count(_pm_25_pc[chIndex].update.avg)) {
-      pms[json_prop_pm25Count] = ag->round2(_pm_25_pc[ch].update.avg);
+      pms[json_prop_pm25Count] = ag->round2(_pm_25_pc[chIndex].update.avg);
     }
-    if (_pm_5_pc[ch].listValues.empty() == false) {
+    if (_pm_5_pc[chIndex].listValues.empty() == false) {
       // Only include pm5.0 count when values available on its list
       // If not, means no pm5_pc available from the sensor
-      if (utils::isValidPm03Count(_pm_5_pc[ch].update.avg)) {
+      if (utils::isValidPm03Count(_pm_5_pc[chIndex].update.avg)) {
-        pms[json_prop_pm5Count] = ag->round2(_pm_5_pc[ch].update.avg);
+        pms[json_prop_pm5Count] = ag->round2(_pm_5_pc[chIndex].update.avg);
       }
     }
-    if (_pm_10_pc[ch].listValues.empty() == false) {
+    if (_pm_10_pc[chIndex].listValues.empty() == false) {
       // Only include pm10 count when values available on its list
       // If not, means no pm10_pc available from the sensor
-      if (utils::isValidPm03Count(_pm_10_pc[ch].update.avg)) {
+      if (utils::isValidPm03Count(_pm_10_pc[chIndex].update.avg)) {
-        pms[json_prop_pm10Count] = ag->round2(_pm_10_pc[ch].update.avg);
+        pms[json_prop_pm10Count] = ag->round2(_pm_10_pc[chIndex].update.avg);
       }
     }
 
     if (withTempHum) {
       float _vc;
       // Set temperature if valid
-      if (utils::isValidTemperature(_temperature[ch].update.avg)) {
+      if (utils::isValidTemperature(_temperature[chIndex].update.avg)) {
-        pms[json_prop_temp] = ag->round2(_temperature[ch].update.avg);
+        pms[json_prop_temp] = ag->round2(_temperature[chIndex].update.avg);
         // Compensate temperature when flag is set
         if (compensate) {
           _vc = getCorrectedTempHum(Temperature, ch, true);
@@ -848,8 +884,8 @@ JSONVar Measurements::buildPMS(int ch, bool allCh, bool withTempHum, bool compen
         }
       }
       // Set humidity if valid
-      if (utils::isValidHumidity(_humidity[ch].update.avg)) {
+      if (utils::isValidHumidity(_humidity[chIndex].update.avg)) {
-        pms[json_prop_rhum] = ag->round2(_humidity[ch].update.avg);
+        pms[json_prop_rhum] = ag->round2(_humidity[chIndex].update.avg);
         // Compensate relative humidity when flag is set
         if (compensate) {
           _vc = getCorrectedTempHum(Humidity, ch, true);
@@ -859,19 +895,16 @@ JSONVar Measurements::buildPMS(int ch, bool allCh, bool withTempHum, bool compen
         }
       }
 
+    }
+
     // Add pm25 compensated value only if PM2.5 and humidity value is valid
     if (compensate) {
-        if (utils::isValidPm(_pm_25[ch].update.avg) &&
+      if (utils::isValidPm(_pm_25[chIndex].update.avg) &&
-            utils::isValidHumidity(_humidity[ch].update.avg)) {
+          utils::isValidHumidity(_humidity[chIndex].update.avg)) {
-          // Note: the pms5003t object is not matter either for channel 1 or 2, compensate points to
+        float pm25 = getCorrectedPM25(true, ch, true);
-          // the same base function
-          float pm25 = ag->pms5003t_1.compensate(_pm_25[ch].update.avg, _humidity[ch].update.avg);
-          if (utils::isValidPm(pm25)) {
         pms[json_prop_pm25Compensated] = ag->round2(pm25);
       }
     }
-      }
-    }
 
     // Directly return the json object
     return pms;
@@ -1117,12 +1150,12 @@ JSONVar Measurements::buildPMS(int ch, bool allCh, bool withTempHum, bool compen
       float pm25_comp2 = utils::getInvalidPmValue();
       if (utils::isValidPm(_pm_25[0].update.avg) &&
           utils::isValidHumidity(_humidity[0].update.avg)) {
-        pm25_comp1 = ag->pms5003t_1.compensate(_pm_25[0].update.avg, _humidity[0].update.avg);
+        pm25_comp1 = getCorrectedPM25(true, 1, true);
         pms["channels"]["1"][json_prop_pm25Compensated] = ag->round2(pm25_comp1);
       }
       if (utils::isValidPm(_pm_25[1].update.avg) &&
           utils::isValidHumidity(_humidity[1].update.avg)) {
-        pm25_comp2 = ag->pms5003t_2.compensate(_pm_25[1].update.avg, _humidity[1].update.avg);
+        pm25_comp2 = getCorrectedPM25(true, 2, true);
         pms["channels"]["2"][json_prop_pm25Compensated] = ag->round2(pm25_comp2);
       }
 

src/AgValue.h

@@ -144,9 +144,10 @@ public:
    *
    * @param useAvg Use moving average value if true, otherwise use latest value
    * @param ch MeasurementType channel
+   * @param forceCorrection force using correction even though config correction is not applied, default to EPA
    * @return float Corrected PM2.5 value
    */
-  float getCorrectedPM25(bool useAvg = false, int ch = 1);
+  float getCorrectedPM25(bool useAvg = false, int ch = 1, bool forceCorrection = false);
 
   /**
    * build json payload for every measurements

src/AgWiFiConnector.cpp

@@ -81,16 +81,15 @@ bool WifiConnector::connect(void) {
   // ssid = "AG-" + String(ESP.getChipId(), HEX);
   WIFI()->setConfigPortalTimeout(WIFI_CONNECT_COUNTDOWN_MAX);
 
-  WiFiManagerParameter postToAg("chbPostToAg",
+  WiFiManagerParameter disableCloud("chbPostToAg", "Prevent Connection to AirGradient Server", "T",
-                                "Prevent Connection to AirGradient Server", "T",
                                     2, "type=\"checkbox\" ", WFM_LABEL_AFTER);
-  WIFI()->addParameter(&postToAg);
+  WIFI()->addParameter(&disableCloud);
-  WiFiManagerParameter postToAgInfo(
+  WiFiManagerParameter disableCloudInfo(
       "<p>Prevent connection to the AirGradient Server. Important: Only enable "
       "it if you are sure you don't want to use any AirGradient cloud "
-      "features. As a result you will not receive automatic firmware updates "
+      "features. As a result you will not receive automatic firmware updates, "
-      "and your data will not reach the AirGradient dashboard.</p>");
+      "configuration settings from cloud and the measure data will not reach the AirGradient dashboard.</p>");
-  WIFI()->addParameter(&postToAgInfo);
+  WIFI()->addParameter(&disableCloudInfo);
 
   WIFI()->autoConnect(ssid.c_str(), WIFI_HOTSPOT_PASSWORD_DEFAULT);
 
@@ -174,12 +173,11 @@ bool WifiConnector::connect(void) {
     logInfo("WiFi Connected: " + WiFi.SSID() + " IP: " + localIpStr());
 
     if (hasPortalConfig) {
-      String result = String(postToAg.getValue());
+      String result = String(disableCloud.getValue());
-      logInfo("Setting postToAirGradient set from " +
+      logInfo("Setting disableCloudConnection set from " +
-              String(config.isPostDataToAirGradient() ? "True" : "False") +
+              String(config.isCloudConnectionDisabled() ? "True" : "False") + String(" to ") +
-              String(" to ") + String(result != "T" ? "True" : "False") +
+              String(result == "T" ? "True" : "False") + String(" successful"));
-              String(" successful"));
+      config.setDisableCloudConnection(result == "T");
-      config.setPostToAirGradient(result != "T");
     }
     hasPortalConfig = false;
   }

src/AirGradient.h

@@ -15,7 +15,7 @@
 #include "Main/utils.h"
 
 #ifndef GIT_VERSION
-#define GIT_VERSION "3.1.21-snap"
+#define GIT_VERSION "3.2.0-snap"
 #endif
 
 #ifndef ESP8266

src/App/AppDef.h

@@ -95,15 +95,10 @@ enum ConfigurationControl {
 };
 
 enum PMCorrectionAlgorithm {
-  Unknown, // Unknown algorithm
+  COR_ALGO_PM_UNKNOWN, // Unknown algorithm
-  None,    // No PM correction
+  COR_ALGO_PM_NONE,    // No PM correction
-  EPA_2021,
+  COR_ALGO_PM_EPA_2021,
-  SLR_PMS5003_20220802,
+  COR_ALGO_PM_SLR_CUSTOM,
-  SLR_PMS5003_20220803,
-  SLR_PMS5003_20220824,
-  SLR_PMS5003_20231030,
-  SLR_PMS5003_20231218,
-  SLR_PMS5003_20240104,
 };
 
 // Don't change the order of the enum