[mqtt-client] user can only async_disconnect with rcs < 0x80, fix async_disconnect ecs

Summary: resolves T12974

Reviewers: ivica

Reviewed By: ivica

Subscribers: miljen, iljazovic

Maniphest Tasks: T12974

Differential Revision: https://repo.mireo.local/D26294
This commit is contained in:
Korina Šimičević
2023-10-27 10:41:15 +02:00
parent 2f1f910552
commit 9e0e57530c
4 changed files with 74 additions and 80 deletions

View File

@@ -20,9 +20,15 @@ enum class disconnect_rc_e : std::uint8_t {
/** The Client wishes to disconnect but requires that
the Server also publishes its Will Message. */
disconnect_with_will_message = 0x04
};
namespace detail {
enum class disconnect_rc_e : std::uint8_t {
normal_disconnection = 0x00,
disconnect_with_will_message = 0x04,
// TODO: these reason codes should not be available to the user, only the client
unspecified_error = 0x80,
malformed_packet = 0x81,
protocol_error = 0x82,
@@ -37,6 +43,9 @@ enum class disconnect_rc_e : std::uint8_t {
payload_format_invalid = 0x99
};
}
namespace client {
/**
* \brief MQTT client error codes.
@@ -44,23 +53,14 @@ namespace client {
* \details Represents error that occur on the client side.
*/
enum class error : int {
/** [unused] A fatal error occurred. */
fatal_error = 100,
/// \cond INTERNAL
/** Malformed packet has been detected. */
malformed_packet,
malformed_packet = 100,
/// \endcond
/** There are no more available Packet Identifiers to use. */
pid_overrun,
/** [unused] The Client has reconnected. */
reconnected,
/** [unused] The Client has been disconnected. */
disconnected,
// publish
/** The Server does not support the specified \ref qos_e. */
qos_not_supported,
@@ -77,16 +77,10 @@ inline std::string client_error_to_string(error err) {
using enum error;
switch (err) {
case fatal_error:
return "A fatal error occurred";
case malformed_packet:
return "Malformed packet has been detected";
case pid_overrun:
return "There are no more available Packet Identifiers to use.";
case reconnected:
return "The Client has reconnected";
case disconnected:
return "The Client has been disconnected";
case qos_not_supported:
return "The Server does not support the specified QoS";
case retain_not_available:
@@ -320,148 +314,148 @@ using enum category;
constexpr reason_code empty {};
/** The operation completed successfully. */
constexpr reason_code success{ 0x00 };
constexpr reason_code success { 0x00 };
/** Close the connection normally. Do not send the Will Message. */
constexpr reason_code normal_disconnection{ 0x00, disconnect };
constexpr reason_code normal_disconnection { 0x00, disconnect };
/** The subscription is accepted with maximum QoS sent at 0. */
constexpr reason_code granted_qos_0{ 0x00, suback };
constexpr reason_code granted_qos_0 { 0x00, suback };
/** The subscription is accepted with maximum QoS sent at 1. */
constexpr reason_code granted_qos_1{ 0x01 };
constexpr reason_code granted_qos_1 { 0x01 };
/** The subscription is accepted with maximum QoS sent at 2 */
constexpr reason_code granted_qos_2{ 0x02 };
constexpr reason_code granted_qos_2 { 0x02 };
/** The Client wishes to disconnect but requires that
the Server also publishes its Will Message. */
constexpr reason_code disconnect_with_will_message{ 0x04 };
constexpr reason_code disconnect_with_will_message { 0x04 };
/** The message is accepted but there are no subscribers. */
constexpr reason_code no_matching_subscribers{ 0x10 };
constexpr reason_code no_matching_subscribers { 0x10 };
/** No matching Topic Filter is being used by the Client. */
constexpr reason_code no_subscription_existed{ 0x11 };
constexpr reason_code no_subscription_existed { 0x11 };
/** Continue the authentication with another step. */
constexpr reason_code continue_authentication{ 0x18 };
constexpr reason_code continue_authentication { 0x18 };
/** Initiate a re-authentication. */
constexpr reason_code reauthenticate{ 0x19 };
constexpr reason_code reauthenticate { 0x19 };
/** The Server does not wish to reveal the reason for the
failure, or none of the other Reason Codes apply. */
constexpr reason_code unspecified_error{ 0x80 };
constexpr reason_code unspecified_error { 0x80 };
/** Data within the packet could not be correctly parsed. */
constexpr reason_code malformed_packet{ 0x81 };
constexpr reason_code malformed_packet { 0x81 };
/** Data in the packet does not conform to this specification. */
constexpr reason_code protocol_error{ 0x82 };
constexpr reason_code protocol_error { 0x82 };
/** The packet is valid but not accepted by this Server. */
constexpr reason_code implementation_specific_error{ 0x83 };
constexpr reason_code implementation_specific_error { 0x83 };
/** The Server does not support the requested version of the MQTT protocol. */
constexpr reason_code unsupported_protocol_version{ 0x84 };
constexpr reason_code unsupported_protocol_version { 0x84 };
/** The Client ID is valid but not allowed by this Server. */
constexpr reason_code client_id_not_valid{ 0x85 };
constexpr reason_code client_id_not_valid { 0x85 };
/** The Server does not accept the User Name or Password provided. */
constexpr reason_code bad_username_or_password{ 0x86 };
constexpr reason_code bad_username_or_password { 0x86 };
/** The request is not authorized. */
constexpr reason_code not_authorized{ 0x87 };
constexpr reason_code not_authorized { 0x87 };
/** The MQTT Server is not available. */
constexpr reason_code server_unavailable{ 0x88 };
constexpr reason_code server_unavailable { 0x88 };
/** The MQTT Server is busy, try again later. */
constexpr reason_code server_busy{ 0x89 };
constexpr reason_code server_busy { 0x89 };
/** The Client has been banned by administrative action. */
constexpr reason_code banned{ 0x8a };
constexpr reason_code banned { 0x8a };
/** The Server is shutting down. */
constexpr reason_code server_shutting_down{ 0x8b };
constexpr reason_code server_shutting_down { 0x8b };
/** The authentication method is not supported or
does not match the method currently in use. */
constexpr reason_code bad_authentication_method{ 0x8c };
constexpr reason_code bad_authentication_method { 0x8c };
/** No packet has been received for 1.5 times the Keepalive time. */
constexpr reason_code keep_alive_timeout{ 0x8d };
constexpr reason_code keep_alive_timeout { 0x8d };
/** Another Connection using the same ClientID has connected
causing this Connection to be closed. */
constexpr reason_code session_taken_over{ 0x8e };
constexpr reason_code session_taken_over { 0x8e };
/** The Topic Filter is not malformed, but it is not accepted. */
constexpr reason_code topic_filter_invalid{ 0x8f };
constexpr reason_code topic_filter_invalid { 0x8f };
/** The Topic Name is not malformed, but it is not accepted. */
constexpr reason_code topic_name_invalid{ 0x90 };
constexpr reason_code topic_name_invalid { 0x90 };
/** The Packet Identifier is already in use. */
constexpr reason_code packet_id_in_use{ 0x91 };
constexpr reason_code packet_id_in_use { 0x91 };
/** The Packet Identifier is not known. */
constexpr reason_code packet_id_not_found{ 0x92 };
constexpr reason_code packet_id_not_found { 0x92 };
/** The Client or Server has received more than Receive
Maximum publication for which it has not sent PUBACK or PUBCOMP. */
constexpr reason_code receive_maximum_exceeded{ 0x93 };
constexpr reason_code receive_maximum_exceeded { 0x93 };
/** The Client or Server received a PUBLISH packet containing
a Topic Alias greater than the Maximum Topic Alias. */
constexpr reason_code topic_alias_invalid{ 0x94 };
constexpr reason_code topic_alias_invalid { 0x94 };
/** The packet exceeded the maximum permissible size. */
constexpr reason_code packet_too_large{ 0x95 };
constexpr reason_code packet_too_large { 0x95 };
/** The received data rate is too high. */
constexpr reason_code message_rate_too_high{ 0x96 };
constexpr reason_code message_rate_too_high { 0x96 };
/** An implementation or administrative imposed limit has been exceeded. */
constexpr reason_code quota_exceeded{ 0x97 };
constexpr reason_code quota_exceeded { 0x97 };
/** The Connection is closed due to an administrative action. */
constexpr reason_code administrative_action{ 0x98 };
constexpr reason_code administrative_action { 0x98 };
/** The Payload does not match the specified Payload Format Indicator. */
constexpr reason_code payload_format_invalid{ 0x99 };
constexpr reason_code payload_format_invalid { 0x99 };
/** The Server does not support retained messages. */
constexpr reason_code retain_not_supported{ 0x9a };
constexpr reason_code retain_not_supported { 0x9a };
/** The Server does not support the QoS the Client specified or
it is greater than the Maximum QoS specified. */
constexpr reason_code qos_not_supported{ 0x9b };
constexpr reason_code qos_not_supported { 0x9b };
/** The Client should temporarily use another server. */
constexpr reason_code use_another_server{ 0x9c };
constexpr reason_code use_another_server { 0x9c };
/** The Client should permanently use another server. */
constexpr reason_code server_moved{ 0x9d };
constexpr reason_code server_moved { 0x9d };
/** The Server does not support Shared Subscriptions for this Client. */
constexpr reason_code shared_subscriptions_not_supported{ 0x9e };
constexpr reason_code shared_subscriptions_not_supported { 0x9e };
/** The connection rate limit has been exceeded. */
constexpr reason_code connection_rate_exceeded{ 0x9f };
constexpr reason_code connection_rate_exceeded { 0x9f };
/** The maximum connection time authorized for this
connection has been exceeded. */
constexpr reason_code maximum_connect_time{ 0xa0 };
constexpr reason_code maximum_connect_time { 0xa0 };
/** The Server does not support Subscription Identifiers. */
constexpr reason_code subscription_ids_not_supported{ 0xa1 };
constexpr reason_code subscription_ids_not_supported { 0xa1 };
/** The Server does not support Wildcard Subscriptions. */
constexpr reason_code wildcard_subscriptions_not_supported{ 0xa2 };
constexpr reason_code wildcard_subscriptions_not_supported { 0xa2 };
namespace detail {