espressif/arduino-esp32
1
0
Fork 1
mirror of https://github.com/0xFEEDC0DE64/arduino-esp32.git synced 2025-10-08 11:50:56 +02:00
Code Issues Packages Projects Releases Wiki Activity

Initial IDF-4.0 port

Browse Source 
SmartConfig and ETH need some work to adapt to the new API
This commit is contained in:
me-no-dev
2020-01-25 05:44:14 +02:00
parent be4d3b6cb8
commit 1bf59ac227
48 changed files with 401 additions and 267 deletions
Download Patch File Download Diff File Expand all files Collapse all files

103
libraries/WiFi/examples/ETH_LAN8720_internal_clock/ETH_LAN8720_internal_clock.ino
View File

@@ -1,103 +0,0 @@
/*
This sketch shows how to configure different external or internal clock sources for the Ethernet PHY
*/
#include <ETH.h>
/*
* ETH_CLOCK_GPIO0_IN - default: external clock from crystal oscillator
* ETH_CLOCK_GPIO0_OUT - 50MHz clock from internal APLL output on GPIO0 - possibly an inverter is needed for LAN8720
* ETH_CLOCK_GPIO16_OUT - 50MHz clock from internal APLL output on GPIO16 - possibly an inverter is needed for LAN8720
* ETH_CLOCK_GPIO17_OUT - 50MHz clock from internal APLL inverted output on GPIO17 - tested with LAN8720
*/
#ifdef ETH_CLK_MODE
#undef ETH_CLK_MODE
#endif
#define ETH_CLK_MODE ETH_CLOCK_GPIO17_OUT
// Pin# of the enable signal for the external crystal oscillator (-1 to disable for internal APLL source)
#define ETH_POWER_PIN -1
// Type of the Ethernet PHY (LAN8720 or TLK110)
#define ETH_TYPE ETH_PHY_LAN8720
// I²C-address of Ethernet PHY (0 or 1 for LAN8720, 31 for TLK110)
#define ETH_ADDR 0
// Pin# of the I²C clock signal for the Ethernet PHY
#define ETH_MDC_PIN 15
// Pin# of the I²C IO signal for the Ethernet PHY
#define ETH_MDIO_PIN 2
static bool eth_connected = false;
void WiFiEvent(WiFiEvent_t event) {
switch (event) {
case SYSTEM_EVENT_ETH_START:
Serial.println("ETH Started");
//set eth hostname here
ETH.setHostname("esp32-ethernet");
break;
case SYSTEM_EVENT_ETH_CONNECTED:
Serial.println("ETH Connected");
break;
case SYSTEM_EVENT_ETH_GOT_IP:
Serial.print("ETH MAC: ");
Serial.print(ETH.macAddress());
Serial.print(", IPv4: ");
Serial.print(ETH.localIP());
if (ETH.fullDuplex()) {
Serial.print(", FULL_DUPLEX");
}
Serial.print(", ");
Serial.print(ETH.linkSpeed());
Serial.println("Mbps");
eth_connected = true;
break;
case SYSTEM_EVENT_ETH_DISCONNECTED:
Serial.println("ETH Disconnected");
eth_connected = false;
break;
case SYSTEM_EVENT_ETH_STOP:
Serial.println("ETH Stopped");
eth_connected = false;
break;
default:
break;
}
}
void testClient(const char * host, uint16_t port) {
Serial.print("\nconnecting to ");
Serial.println(host);
WiFiClient client;
if (!client.connect(host, port)) {
Serial.println("connection failed");
return;
}
client.printf("GET / HTTP/1.1\r\nHost: %s\r\n\r\n", host);
while (client.connected() && !client.available());
while (client.available()) {
Serial.write(client.read());
}
Serial.println("closing connection\n");
client.stop();
}
void setup() {
Serial.begin(115200);
WiFi.onEvent(WiFiEvent);
ETH.begin(ETH_ADDR, ETH_POWER_PIN, ETH_MDC_PIN, ETH_MDIO_PIN, ETH_TYPE, ETH_CLK_MODE);
}
void loop() {
if (eth_connected) {
testClient("google.com", 80);
}
delay(10000);
}

1
libraries/WiFi/examples/WPS/WPS.ino
View File

@@ -31,7 +31,6 @@ WPS
static esp_wps_config_t config;
void wpsInitConfig(){
config.crypto_funcs = &g_wifi_default_wps_crypto_funcs;
config.wps_type = ESP_WPS_MODE;
strcpy(config.factory_info.manufacturer, ESP_MANUFACTURER);
strcpy(config.factory_info.model_number, ESP_MODEL_NUMBER);

3
libraries/WiFi/examples/WiFiClientEnterprise/WiFiClientEnterprise.ino
View File

@@ -16,8 +16,7 @@ void setup() {
esp_wifi_sta_wpa2_ent_set_identity((uint8_t *)EAP_IDENTITY, strlen(EAP_IDENTITY)); //provide identity
esp_wifi_sta_wpa2_ent_set_username((uint8_t *)EAP_IDENTITY, strlen(EAP_IDENTITY)); //provide username --> identity and username is same
esp_wifi_sta_wpa2_ent_set_password((uint8_t *)EAP_PASSWORD, strlen(EAP_PASSWORD)); //provide password
esp_wpa2_config_t config = WPA2_CONFIG_INIT_DEFAULT(); //set config settings to default
esp_wifi_sta_wpa2_ent_enable(&config); //set config settings to enable function
esp_wifi_sta_wpa2_ent_enable();
WiFi.begin(ssid); //connect to wifi
while (WiFi.status() != WL_CONNECTED) {
delay(500);