espressif/arduino-esp32
1
0
Fork 1
mirror of https://github.com/0xFEEDC0DE64/arduino-esp32.git synced 2025-06-29 03:50:58 +02:00
Code Issues Packages Projects Releases Wiki Activity

Fixes UART pin setting + adds CTS/RTS HW Flow Control (#6272)

Browse Source 
* fixes setPins and begin to keep rx/tx unmodified

* adds Hardware Flow Control mode and CTS/RTS pin setting

* adds Hardware Flow Control mode and CTS/RTS pin setting

* adds Hardware Flow Control mode and CTS/RTS pin setting

* adds Hardware Flow Control mode and CTS/RTS pin setting

* Code Review
This commit is contained in:
Rodrigo Garcia
2022-02-16 22:28:46 -03:00
committed by GitHub
parent 01303b700d
commit 50e9772ecf
4 changed files with 75 additions and 30 deletions
Download Patch File Download Diff File Expand all files Collapse all files

56
cores/esp32/HardwareSerial.cpp
View File

@ -6,6 +6,7 @@
#include "pins_arduino.h"
#include "HardwareSerial.h"
#include "soc/soc_caps.h"
#include "driver/uart.h"
#ifndef SOC_RX0
#if CONFIG_IDF_TARGET_ESP32
@ -114,7 +115,6 @@ void serialEventRun(void)
}
#endif
HardwareSerial::HardwareSerial(int uart_nr) : _uart_nr(uart_nr), _uart(NULL), _rxBufferSize(256) {}
void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, int8_t txPin, bool invert, unsigned long timeout_ms, uint8_t rxfifo_full_thrhd)
@ -123,28 +123,39 @@ void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, in
log_e("Serial number is invalid, please use numers from 0 to %u", SOC_UART_NUM - 1);
return;
}
// First Time or after end() --> set default Pins
if (!uartIsDriverInstalled(_uart)) {
switch (_uart_nr) {
case UART_NUM_0:
rxPin = rxPin < 0 ? SOC_RX0 : rxPin;
txPin = txPin < 0 ? SOC_TX0 : txPin;
break;
#if SOC_UART_NUM > 1 // may save some flash bytes...
case UART_NUM_1:
rxPin = rxPin < 0 ? RX1 : rxPin;
txPin = txPin < 0 ? TX1 : txPin;
break;
#endif
#if SOC_UART_NUM > 2 // may save some flash bytes...
case UART_NUM_2:
rxPin = rxPin < 0 ? RX2 : rxPin;
txPin = txPin < 0 ? TX2 : txPin;
break;
#endif
default:
log_e("Bad UART Number");
return;
}
}
if(_uart) {
// in this case it is a begin() over a previous begin() - maybe to change baud rate
// thus do not disable debug output
end(false);
}
if(_uart_nr == 0 && rxPin < 0 && txPin < 0) {
rxPin = SOC_RX0;
txPin = SOC_TX0;
}
#if SOC_UART_NUM > 1
if(_uart_nr == 1 && rxPin < 0 && txPin < 0) {
rxPin = RX1;
txPin = TX1;
}
#endif
#if SOC_UART_NUM > 2
if(_uart_nr == 2 && rxPin < 0 && txPin < 0) {
rxPin = RX2;
txPin = TX2;
}
#endif
// IDF UART driver keeps Pin setting on restarting. Negative Pin number will keep it unmodified.
_uart = uartBegin(_uart_nr, baud ? baud : 9600, config, rxPin, txPin, _rxBufferSize, invert, rxfifo_full_thrhd);
if (!baud) {
// using baud rate as zero, forces it to try to detect the current baud rate in place
@ -280,9 +291,16 @@ void HardwareSerial::setRxInvert(bool invert)
uartSetRxInvert(_uart, invert);
}
void HardwareSerial::setPins(uint8_t rxPin, uint8_t txPin)
// negative Pin value will keep it unmodified
void HardwareSerial::setPins(int8_t rxPin, int8_t txPin, int8_t ctsPin, int8_t rtsPin)
{
uartSetPins(_uart, rxPin, txPin);
uartSetPins(_uart, rxPin, txPin, ctsPin, rtsPin);
}
// Enables or disables Hardware Flow Control using RTS and/or CTS pins (must use setAllPins() before)
void HardwareSerial::setHwFlowCtrlMode(uint8_t mode, uint8_t threshold)
{
uartSetHwFlowCtrlMode(_uart, mode, threshold);
}
size_t HardwareSerial::setRxBufferSize(size_t new_size) {