initial import

libraries/WiFi/examples/WiFiScan/WiFiScan.ino

@@ -0,0 +1,48 @@
+/*
+ *  This sketch demonstrates how to scan WiFi networks.
+ *  The API is almost the same as with the WiFi Shield library,
+ *  the most obvious difference being the different file you need to include:
+ */
+#include "WiFi.h"
+
+void setup()
+{
+    Serial.begin(115200);
+
+    // Set WiFi to station mode and disconnect from an AP if it was previously connected
+    WiFi.mode(WIFI_STA);
+    WiFi.disconnect();
+    delay(100);
+
+    Serial.println("Setup done");
+}
+
+void loop()
+{
+    Serial.println("scan start");
+
+    // WiFi.scanNetworks will return the number of networks found
+    int n = WiFi.scanNetworks();
+    Serial.println("scan done");
+    if (n == 0) {
+        Serial.println("no networks found");
+    } else {
+        Serial.print(n);
+        Serial.println(" networks found");
+        for (int i = 0; i < n; ++i) {
+            // Print SSID and RSSI for each network found
+            Serial.print(i + 1);
+            Serial.print(": ");
+            Serial.print(WiFi.SSID(i));
+            Serial.print(" (");
+            Serial.print(WiFi.RSSI(i));
+            Serial.print(")");
+            Serial.println((WiFi.encryptionType(i) == ENC_TYPE_NONE)?" ":"*");
+            delay(10);
+        }
+    }
+    Serial.println("");
+
+    // Wait a bit before scanning again
+    delay(5000);
+}