Update IDF to ebdcbe8c6 (#2539)

- ESP-Face to 2937054
- ESP32-Camera to 113629b

tools/sdk/include/app_update/esp_ota_ops.h

@@ -34,6 +34,10 @@ extern "C"
 #define ESP_ERR_OTA_PARTITION_CONFLICT           (ESP_ERR_OTA_BASE + 0x01)  /*!< Error if request was to write or erase the current running partition */
 #define ESP_ERR_OTA_SELECT_INFO_INVALID          (ESP_ERR_OTA_BASE + 0x02)  /*!< Error if OTA data partition contains invalid content */
 #define ESP_ERR_OTA_VALIDATE_FAILED              (ESP_ERR_OTA_BASE + 0x03)  /*!< Error if OTA app image is invalid */
+#define ESP_ERR_OTA_SMALL_SEC_VER                (ESP_ERR_OTA_BASE + 0x04)  /*!< Error if the firmware has a secure version less than the running firmware. */
+#define ESP_ERR_OTA_ROLLBACK_FAILED              (ESP_ERR_OTA_BASE + 0x05)  /*!< Error if flash does not have valid firmware in passive partition and hence rollback is not possible */
+#define ESP_ERR_OTA_ROLLBACK_INVALID_STATE       (ESP_ERR_OTA_BASE + 0x06)  /*!< Error if current active firmware is still marked in pending validation state (ESP_OTA_IMG_PENDING_VERIFY), essentially first boot of firmware image post upgrade and hence firmware upgrade is not possible */
+
 
 /**
  * @brief Opaque handle for an application OTA update
@@ -51,6 +55,16 @@ typedef uint32_t esp_ota_handle_t;
  */
 const esp_app_desc_t *esp_ota_get_app_description(void);
 
+/**
+ * @brief   Fill the provided buffer with SHA256 of the ELF file, formatted as hexadecimal, null-terminated.
+ * If the buffer size is not sufficient to fit the entire SHA256 in hex plus a null terminator,
+ * the largest possible number of bytes will be written followed by a null.
+ * @param dst   Destination buffer
+ * @param size  Size of the buffer
+ * @return      Number of bytes written to dst (including null terminator)
+ */
+int esp_ota_get_app_elf_sha256(char* dst, size_t size);
+
 /**
  * @brief   Commence an OTA update writing to the specified partition.
 
@@ -62,6 +76,10 @@ const esp_app_desc_t *esp_ota_get_app_description(void);
  * On success, this function allocates memory that remains in use
  * until esp_ota_end() is called with the returned handle.
  *
+ * Note: If the rollback option is enabled and the running application has the ESP_OTA_IMG_PENDING_VERIFY state then
+ * it will lead to the ESP_ERR_OTA_ROLLBACK_INVALID_STATE error. Confirm the running app before to run download a new app,
+ * use esp_ota_mark_app_valid_cancel_rollback() function for it (this should be done as early as possible when you first download a new application).
+ *
  * @param partition Pointer to info for partition which will receive the OTA update. Required.
  * @param image_size Size of new OTA app image. Partition will be erased in order to receive this size of image. If 0 or OTA_SIZE_UNKNOWN, the entire partition is erased.
  * @param out_handle On success, returns a handle which should be used for subsequent esp_ota_write() and esp_ota_end() calls.
@@ -75,6 +93,7 @@ const esp_app_desc_t *esp_ota_get_app_description(void);
  *    - ESP_ERR_OTA_SELECT_INFO_INVALID: The OTA data partition contains invalid data.
  *    - ESP_ERR_INVALID_SIZE: Partition doesn't fit in configured flash size.
  *    - ESP_ERR_FLASH_OP_TIMEOUT or ESP_ERR_FLASH_OP_FAIL: Flash write failed.
+ *    - ESP_ERR_OTA_ROLLBACK_INVALID_STATE: If the running app has not confirmed state. Before performing an update, the application must be valid.
  */
 esp_err_t esp_ota_begin(const esp_partition_t* partition, size_t image_size, esp_ota_handle_t* out_handle);
 
@@ -208,8 +227,11 @@ esp_err_t esp_ota_mark_app_valid_cancel_rollback();
  * @brief This function is called to roll back to the previously workable app with reboot.
  *
  * If rollback is successful then device will reset else API will return with error code.
+ * Checks applications on a flash drive that can be booted in case of rollback.
+ * If the flash does not have at least one app (except the running app) then rollback is not possible.
  * @return
  *  - ESP_FAIL: if not successful.
+ *  - ESP_ERR_OTA_ROLLBACK_FAILED: The rollback is not possible due to flash does not have any apps.
  */
 esp_err_t esp_ota_mark_app_invalid_rollback_and_reboot();
 
@@ -242,6 +264,18 @@ esp_err_t esp_ota_get_state_partition(const esp_partition_t *partition, esp_ota_
  */
 esp_err_t esp_ota_erase_last_boot_app_partition(void);
 
+/**
+ * @brief Checks applications on the slots which can be booted in case of rollback.
+ *
+ * These applications should be valid (marked in otadata as not UNDEFINED, INVALID or ABORTED and crc is good) and be able booted,
+ * and secure_version of app >= secure_version of efuse (if anti-rollback is enabled).
+ *
+ * @return
+ *        - True: Returns true if the slots have at least one app (except the running app).
+ *        - False: The rollback is not possible.
+ */
+bool esp_ota_check_rollback_is_possible(void);
+
 #ifdef __cplusplus
 }
 #endif