Update IDF to 3.2-3276a13 and esptool.py to 2.5.0 (#1878)

* TX Flow Control and Code cleanup

* Use semaphore instead of delay

TX functionality is done.

* Use single buffer and empty queue on exit

* Fix compile issues because of LwIP code relocation

* Add temporary header to fix Azure not compiling

* Fix AsyncUDP early init

* AsyncUDP Multicast fixes

* Add source mac address and rework multicast

* Allow redefinition of default pins for Serials 1 and 2

* Update IDF to 3276a13

* Update esptool.py to 2.5.0

* Fix sketches

* Fix log level in BluetoothSetial

tools/sdk/sdkconfig

@@ -35,6 +35,7 @@ CONFIG_ARDUHAL_PARTITION_SCHEME_NO_OTA=
 CONFIG_ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS=
 CONFIG_ARDUHAL_PARTITION_SCHEME="default"
 CONFIG_AUTOCONNECT_WIFI=
+CONFIG_ARDUINO_SELECTIVE_COMPILATION=
 
 #
 # Bootloader config
@@ -50,10 +51,14 @@ CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V=
 CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
 CONFIG_BOOTLOADER_FACTORY_RESET=
 CONFIG_BOOTLOADER_APP_TEST=
+CONFIG_BOOTLOADER_WDT_ENABLE=y
+CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE=
+CONFIG_BOOTLOADER_WDT_TIME_MS=9000
 
 #
 # Security features
 #
+CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT=
 CONFIG_SECURE_BOOT_ENABLED=
 CONFIG_FLASH_ENCRYPTION_ENABLED=
 
@@ -147,6 +152,19 @@ CONFIG_AWS_IOT_SDK=
 # Bluetooth
 #
 CONFIG_BT_ENABLED=y
+
+#
+# Bluetooth controller
+#
+CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=
+CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
+CONFIG_BTDM_CONTROLLER_MODE_BTDM=y
+CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN=3
+CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN=2
+CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN=0
+CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=3
+CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF=2
+CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF=0
 CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE_0=y
 CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE_1=
 CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0
@@ -160,6 +178,13 @@ CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=y
 CONFIG_BTDM_MODEM_SLEEP_MODE_ORIG=y
 CONFIG_BTDM_MODEM_SLEEP_MODE_EVED=
 CONFIG_BTDM_LPCLK_SEL_MAIN_XTAL=y
+CONFIG_BLE_SCAN_DUPLICATE=y
+CONFIG_SCAN_DUPLICATE_BY_DEVICE_ADDR=y
+CONFIG_SCAN_DUPLICATE_BY_ADV_DATA=
+CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR=
+CONFIG_SCAN_DUPLICATE_TYPE=0
+CONFIG_DUPLICATE_SCAN_CACHE_SIZE=20
+CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=
 CONFIG_BLUEDROID_ENABLED=y
 CONFIG_BLUEDROID_PINNED_TO_CORE_0=y
 CONFIG_BLUEDROID_PINNED_TO_CORE_1=
@@ -183,11 +208,9 @@ CONFIG_BT_STACK_NO_LOG=y
 CONFIG_BT_ACL_CONNECTIONS=4
 CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST=y
 CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY=y
-CONFIG_BLE_SCAN_DUPLICATE=y
-CONFIG_DUPLICATE_SCAN_CACHE_SIZE=20
-CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=
+CONFIG_BLE_HOST_QUEUE_CONGESTION_CHECK=
 CONFIG_SMP_ENABLE=y
-CONFIG_BT_RESERVE_DRAM=0x10000
+CONFIG_BT_RESERVE_DRAM=0xdb5c
 
 #
 # Driver configurations
@@ -200,10 +223,12 @@ CONFIG_ADC_FORCE_XPD_FSM=
 CONFIG_ADC2_DISABLE_DAC=y
 
 #
-# SPI master configuration
+# SPI configuration
 #
 CONFIG_SPI_MASTER_IN_IRAM=
 CONFIG_SPI_MASTER_ISR_IN_IRAM=y
+CONFIG_SPI_SLAVE_IN_IRAM=
+CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
 
 #
 # ESP32-specific
@@ -280,12 +305,15 @@ CONFIG_BROWNOUT_DET_LVL_SEL_5=
 CONFIG_BROWNOUT_DET_LVL_SEL_6=
 CONFIG_BROWNOUT_DET_LVL_SEL_7=
 CONFIG_BROWNOUT_DET_LVL=0
+CONFIG_REDUCE_PHY_TX_POWER=y
 CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
 CONFIG_ESP32_TIME_SYSCALL_USE_RTC=
 CONFIG_ESP32_TIME_SYSCALL_USE_FRC1=
 CONFIG_ESP32_TIME_SYSCALL_USE_NONE=
 CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
 CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL=
+CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC=
+CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256=
 CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
 CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
 CONFIG_ESP32_XTAL_FREQ_40=
@@ -351,7 +379,9 @@ CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
 CONFIG_DMA_RX_BUF_NUM=10
 CONFIG_DMA_TX_BUF_NUM=10
 CONFIG_EMAC_L2_TO_L3_RX_BUF_MODE=y
+CONFIG_EMAC_CHECK_LINK_PERIOD_MS=2000
 CONFIG_EMAC_TASK_PRIORITY=20
+CONFIG_EMAC_TASK_STACK_SIZE=3072
 
 #
 # FAT Filesystem support
@@ -419,6 +449,7 @@ CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
 CONFIG_FREERTOS_USE_TRACE_FACILITY=
 CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS=
 CONFIG_FREERTOS_DEBUG_INTERNALS=
+CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
 
 #
 # Heap memory debugging
@@ -429,6 +460,12 @@ CONFIG_HEAP_POISONING_COMPREHENSIVE=
 CONFIG_HEAP_TRACING=
 CONFIG_HEAP_TASK_TRACKING=
 
+#
+# HTTP Server
+#
+CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
+CONFIG_HTTPD_MAX_URI_LEN=512
+
 #
 # libsodium
 #
@@ -461,8 +498,11 @@ CONFIG_LWIP_IP_FRAG=
 CONFIG_LWIP_IP_REASSEMBLY=
 CONFIG_LWIP_STATS=
 CONFIG_LWIP_ETHARP_TRUST_IP_MAC=y
+CONFIG_ESP_GRATUITOUS_ARP=y
+CONFIG_GARP_TMR_INTERVAL=60
 CONFIG_TCPIP_RECVMBOX_SIZE=32
 CONFIG_LWIP_DHCP_DOES_ARP_CHECK=
+CONFIG_LWIP_DHCP_RESTORE_LAST_IP=y
 
 #
 # DHCP server
@@ -518,6 +558,7 @@ CONFIG_LWIP_MAX_RAW_PCBS=16
 #
 # mbedTLS
 #
+CONFIG_MBEDTLS_PLATFORM_MEMORY=
 CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=16384
 CONFIG_MBEDTLS_DEBUG=
 CONFIG_MBEDTLS_HARDWARE_AES=y
@@ -597,6 +638,17 @@ CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
 #
 CONFIG_MDNS_MAX_SERVICES=10
 
+#
+# ESP-MQTT Configurations
+#
+CONFIG_MQTT_PROTOCOL_311=y
+CONFIG_MQTT_TRANSPORT_SSL=y
+CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
+CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
+CONFIG_MQTT_USE_CUSTOM_CONFIG=
+CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED=
+CONFIG_MQTT_CUSTOM_OUTBOX=
+
 #
 # OpenSSL
 #
@@ -652,14 +704,16 @@ CONFIG_SPIFFS_CHECK_DBG=
 CONFIG_SPIFFS_TEST_VISUALISATION=
 
 #
-# tcpip adapter
+# TCP/IP Adapter
 #
 CONFIG_IP_LOST_TIMER_INTERVAL=120
+CONFIG_TCPIP_LWIP=y
 
 #
 # Virtual file system
 #
 CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
+CONFIG_SUPPORT_TERMIOS=y
 
 #
 # Wear Levelling