Update IDF to aaf1239 (#1539)

* fix sdmmc config

* Fix warnings in EEPROM

from @Curclamas

* remove leftover TAG in EEPROM

* Initial add of @stickbreaker i2c

* Add log_n

* fix warnings when log is off

* i2c code clean up and reorganization

* add flags to interrupt allocator

* fix sdmmc config

* Fix warnings in EEPROM

from @Curclamas

* remove leftover TAG in EEPROM

* fix errors with latest IDF

* fix debug optimization (#1365)

incorrect optimization for debugging tick markers.

* Fix some missing BT header

* Change BTSerial log calls

* Update BLE lib

* Arduino-ESP32 release management scripted (#1515)

* Calculate an absolute path for a custom partitions table (#1452)

* * Arduino-ESP32 release management scripted
(ready-to-merge)

* * secure env for espressif/arduino-esp32

* * build tests enabled
* gitter webhook enabled

* * gitter room link fixed
* better comment

* * filepaths fixed

* BT Serial adjustments

* * don't run sketch builds & tests for tagged builds

* Return false from WiFi.hostByName() if hostname is not resolved

* Free BT Memory when BT is not used

* WIFI_MODE_NULL is not supported anymore

* Select some key examples to build with PlatformIO to save some time

* Update BLE lib

* Fixed BLE lib

* Major WiFi overhaul

- auto reconnect on connection loss now works
- moved to event groups
- some code clean up and procedure optimizations
- new methods to get a more elaborate system ststus

* Add cmake tests to travis

* Add initial AsyncUDP

* Add NetBIOS lib and fix CMake includes

* Add Initial WebServer

* Fix WebServer and examples

* travis not quiting on build fail

* Try different travis build

* Update IDF to aaf1239

* Fix WPS Example

* fix script permission and add some fail tests to sketch builder

* Add missing space in WiFiClient::write(Stream &stream)

tools/sdk/include/bootloader_support/bootloader_common.h

@@ -0,0 +1,70 @@
+// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#pragma once
+#include "esp_flash_data_types.h"
+
+/// Type of hold a GPIO in low state
+typedef enum {
+    GPIO_LONG_HOLD  = 1,    /*!< The long hold GPIO */
+    GPIO_SHORT_HOLD = -1,   /*!< The short hold GPIO */
+    GPIO_NOT_HOLD   = 0     /*!< If the GPIO input is not low */
+} esp_comm_gpio_hold_t;
+
+/**
+ * @brief Calculate crc for the OTA data partition.
+ *
+ * @param[in] ota_data The OTA data partition.
+ * @return    Returns crc value.
+ */
+uint32_t bootloader_common_ota_select_crc(const esp_ota_select_entry_t *s);
+
+/**
+ * @brief Verifies the validity of the OTA data partition
+ *
+ * @param[in] ota_data The OTA data partition.
+ * @return    Returns true on valid, false otherwise.
+ */
+bool bootloader_common_ota_select_valid(const esp_ota_select_entry_t *s);
+
+/**
+ * @brief Check if the GPIO input is a long hold or a short hold.
+ *
+ * Number of the GPIO input will be configured as an input with internal pull-up enabled.
+ * If the GPIO input is held low continuously for delay_sec period then it is a long hold.
+ * If the GPIO input is held low for less period then it is a short hold.
+ *
+ * @param[in] num_pin Number of the GPIO input.
+ * @param[in] delay_sec Input must be driven low for at least this long, continuously.
+ * @return esp_comm_gpio_hold_t Defines type of hold a GPIO in low state.
+ */
+esp_comm_gpio_hold_t bootloader_common_check_long_hold_gpio(uint32_t num_pin, uint32_t delay_sec);
+
+/**
+ * @brief Erase the partition data that is specified in the transferred list.
+ *
+ * @param[in] list_erase String containing a list of cleared partitions. Like this "nvs, phy". The string must be null-terminal.
+ * @param[in] ota_data_erase If true then the OTA data partition will be cleared (if there is it in partition table).
+ * @return    Returns true on success, false otherwise.
+ */
+bool bootloader_common_erase_part_type_data(const char *list_erase, bool ota_data_erase);
+
+/**
+ * @brief Determines if the list contains the label
+ *
+ * @param[in] list  A string of names delimited by commas or spaces. Like this "nvs, phy, data". The string must be null-terminated.
+ * @param[in] label The substring that will be searched in the list.
+ * @return    Returns true if the list contains the label, false otherwise.
+ */
+bool bootloader_common_label_search(const char *list, char *label);

tools/sdk/include/bootloader_support/esp_flash_partitions.h

@@ -17,12 +17,12 @@
 #include "esp_err.h"
 #include "esp_flash_data_types.h"
 #include <stdbool.h>
+#include "sdkconfig.h"
 
 /* Pre-partition table fixed flash offsets */
 #define ESP_BOOTLOADER_DIGEST_OFFSET 0x0
 #define ESP_BOOTLOADER_OFFSET 0x1000 /* Offset of bootloader image. Has matching value in bootloader KConfig.projbuild file. */
-#define ESP_BOOTLOADER_SIZE   (ESP_PARTITION_TABLE_OFFSET - ESP_BOOTLOADER_OFFSET)
-#define ESP_PARTITION_TABLE_OFFSET 0x8000 /* Offset of partition table. Has matching value in partition_table Kconfig.projbuild file. */
+#define ESP_PARTITION_TABLE_OFFSET CONFIG_PARTITION_TABLE_OFFSET /* Offset of partition table. Backwards-compatible name.*/
 
 #define ESP_PARTITION_TABLE_MAX_LEN 0xC00 /* Maximum length of partition table data */
 #define ESP_PARTITION_TABLE_MAX_ENTRIES (ESP_PARTITION_TABLE_MAX_LEN / sizeof(esp_partition_info_t)) /* Maximum length of partition table data, including terminating entry */