Summary
Added compiler.warning_flags to all chips in platform.txt to reflect users setting of warning level output during compilation (set up in Arduino IDE preferences)
Impact
When a warning is set to none the compilation will no longer display warnings
Related links
Solves issue #6118
Summary
Touch Sensor refactoring to be based on IDF 4.4.
Adds support to ESP32S2 and future ESP32S3.
Adds some new APIs:
For all chips:
void touchAttachInterruptArg(uint8_t pin, void (*userFunc)(void*), void *arg, uint32_t threshold);
This function allows the user to add and pass a void* parameter to the ISR user callback.
void touchDetachInterrupt(uint8_t pin);
This function detaches ISR call back for the touch pad pin.
Only ESP32 chip
void touchInterruptSetThresholdDirection(bool mustbeLower);
This function allows the user to set if the ISR callback will be activated when the touch sensor readings are lower or higher than the threshold defined. See example TouchButton.ino.
Only ESP32-S2 and ESP32-S3 chips
bool touchInterruptGetLastStatus(uint8_t pin);
This function reports if the touch pad pin is touched or untouched. It can be used with ISR to identify when it is touched and untouched (released). See example TouchButtonV2.ino.
Impact
None. ll original APIs and examples now run on ESP32 and ESP32-S2.
Related links
Fix#6095Fix#6034Fix#5799Fix#5745Fix#5527Fix#5493Fix#4321Fix#4044Fix#2722Fix#2625
* Revert "Examples update, add a note for configTime() that only one ntp server is supported by lwip",
fixed in espressif/esp32-arduino-lib-builder#51
This reverts commit 6b1020967a171c549b3d956825fd0d395de9cce0.
* SimpleTime: add NTPoDHCP option and TimeZone env variable
Summary
This PR is refactoring of SigmaDelta HAL in order to use IDF instead of current Register manipulation approach.
Impact
Change in API:
uint32_t sigmaDeltaSetup(uint8_t channel, uint32_t freq);
changed to -->
uint32_t sigmaDeltaSetup(uint8_t pin, uint8_t channel, uint32_t freq);
void sigmaDeltaAttachPin(uint8_t pin); removed, no longer needed. Pin is attached in sigmaDeltaSetup()
Summary
RMT HAL refactoring based on IDF.
Impact
Improves RMT by adding IDF v4.4 support.
Receiving RMT can handle any size of data.
rmtInit() has a new parameter - RxBufferSize - to hold any number of data when receiving RMT.
rmtWrite() has a new parameter - wait_tx_done - to block writing until sending all data.
Related links
fix#5905
## Summary
Arduino ```setup()``` and ```loop()``` run under a Task with a fixed Stack size of 8KB.
Users may want to change this size.
This PR adds this possibility by just adding a line of code, as for example:
``` dart
ESP_LOOP_TASK_STACK_SIZE(16384);
void setup() {
}
void loop() {
}
```
## Impact
None. It adds a new functionality to ESP32 Arduino.
If ```ESP_LOOP_TASK_STACK_SIZE(newSize);``` is not declared/used, it will compile the sketch with the default stack size of 8KB.
## Related links
fix#6010https://github.com/espressif/arduino-esp32/issues/6010#issuecomment-992701658
Thanks @igrr for the suggestion!
A typographical error is corrected in the 2nd line of the comment.
From = " This is un example howto use Touch Intrrerupts "
To = " This is an example of how to use Touch Intrrerupts "
* Add an aditional (void *) arg to the RMT callback - to allow more flexible handling of the callback (e.g. by passing a private struct or a class pointer). Same pattern as used by the Ticker() and many others. Example updated & new example with a trapoline added.
* Fix example for new API
* Fix lint warnings
* Add a second missed example.
* Correct timeout & improve socket error handling.
* ESP.getChipModel() returns model of the chip
* ESP.getChipCores() returns the core count.
* Example gives chip model, revision and core count.
* Read efuse for chipmodel
Co-authored-by: Martijn Scheepers <ms@SDNengineering.nl>
They are all broadly similar, all being based on the ESP32-D0WD core, but have
some subtle differences between variants around PSRAM inclusion and camera pin
mappings.
The ESP32CAM "unit" product (SKU: U007) has no PSRAM and maps the
"Pixel Data 0" (Y2 GPIO/OV2640 D2) camera pin to IO17 rather than IO32 as is
the case with most other M5Stack ESP32 camera devices.
The ESP32CAM also requires the "hmirror" and "vflip" camera configuration
bits setting in order to capture a true image.
The relevant M5Stack pin configuration documentation can be found here:
https://docs.m5stack.com/#/en/unit/esp32cam?id=pinmap
The boundary delimiter (_STREAM_BOUNDARY) needs to be send before the
body part (_STREAM_PART) too follow RFC2046. This caused ffplay/ffmpeg
to fail to open the MJPEG stream.
Fixed bit shift in demo application of using RMT peripheral. Init data array to be transmitted was off by one, as for the first iteration (i==0) the mask was 1<<8, which results in shifted RGB value in color variable
Closes https://github.com/espressif/arduino-esp32/issues/2921
* Properly allocate string and remove warning
The former way generates the following warning:
ISO C++ forbids converting a string constant to 'char*'
This change makes a character array the size of the string with null ending. It's clearer and gets rid of the warning.
* Better way
Since this is technically immutable, the type should reflect this too.
* TX Flow Control and Code cleanup
* Use semaphore instead of delay
TX functionality is done.
* Use single buffer and empty queue on exit
* Fix compile issues because of LwIP code relocation
* Add temporary header to fix Azure not compiling
* Fix AsyncUDP early init
* AsyncUDP Multicast fixes
* Add source mac address and rework multicast
* Allow redefinition of default pins for Serials 1 and 2
* Update IDF to 3276a13
* Update esptool.py to 2.5.0
* Fix sketches
* Fix log level in BluetoothSetial
* rmt driver initial version
* supporting conti mode plus interrupts
* using conitnous mode for sending more data
* working continous mode
* rmt driver cleanup after conti mode
* initial version of rmt driver
* adding a simple example
* adding channel and block locks
* modified of rmt interface for simpler/easier usage
* adding header sentinels, split interface to common and additional settings
* Fixes per code review + support for rx callback mode
* renamed internal structures and enums, fixed formatting
* cmake support for rmt
* refactored tx-conti interrupts to function to make it more readable
* added Tx and Rx examples
* added license headers
* minor updates per review
* used struct access, renamed defines, corrected diagram
* Allow using argument with attachInterrupt
* formatting
replace tabs with spaces
* fix bug more then 1 interrupt
* leftover
* add example
* make attachInterruptArg public
* update example
* leftover
* Create ledcWrite_demo_ESP32_RGB.ino
adding the public domain example ledcWrite_demo_ESP32.ino to this repo. Added RGB to the name for people searching, added some comments, and renames things to make a bit more sense.
* Update ledcWrite_demo_ESP32_RGB.ino
renamed to ledcWrite_RGB.ino and added a couple more comments based on https://github.com/espressif/arduino-esp32/issues/689
* Rename libraries/ESP32/examples/AnalogOut/ledcWrite_demo_ESP32_RGB/ledcWrite_demo_ESP32_RGB.ino to libraries/ESP32/examples/AnalogOut/ledcWrite_RGB/ledcWrite_RGB.ino
Renamed.
