* Added dual antenna for WiFi (based on the ESP32-WROOM-DA module)
* Fixed build error
* Fixed indentation and renamed function to setDualAntennaConfig
* Added the RX and TX selection modes as configuration
* Mode code optimization
Summary
Touch Sensor refactoring to be based on IDF 4.4.
Adds support to ESP32S2 and future ESP32S3.
Adds some new APIs:
For all chips:
void touchAttachInterruptArg(uint8_t pin, void (*userFunc)(void*), void *arg, uint32_t threshold);
This function allows the user to add and pass a void* parameter to the ISR user callback.
void touchDetachInterrupt(uint8_t pin);
This function detaches ISR call back for the touch pad pin.
Only ESP32 chip
void touchInterruptSetThresholdDirection(bool mustbeLower);
This function allows the user to set if the ISR callback will be activated when the touch sensor readings are lower or higher than the threshold defined. See example TouchButton.ino.
Only ESP32-S2 and ESP32-S3 chips
bool touchInterruptGetLastStatus(uint8_t pin);
This function reports if the touch pad pin is touched or untouched. It can be used with ISR to identify when it is touched and untouched (released). See example TouchButtonV2.ino.
Impact
None. ll original APIs and examples now run on ESP32 and ESP32-S2.
Related links
Fix#6095Fix#6034Fix#5799Fix#5745Fix#5527Fix#5493Fix#4321Fix#4044Fix#2722Fix#2625
CaptivePortal.ino example did randomly crash for me ... so I start investigate ;-)
Decoding stack results
0x4016faea: WiFiUDP::write(unsigned char const*, unsigned int) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\libraries\WiFi\src\WiFiUdp.cpp line 201
0x400d4a4a: DNSServer::replyWithIP() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 187
0x400d4d01: DNSServer::processNextRequest() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 117
0x400d3e81: loop() at D:\Drive\Dokumente\HTL_Lehrer\2021_22\Projekte\Stromzaehler_Patrick\arduino/arduino.ino line 1078
0x400dd545: loopTask(void*) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\cores\esp32\main.cpp line 37
0x4008a0de: vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/port.c line 143
I found with wireshark a possibility to trigger the crash on demand is:
nslookup 3.1o1osr0092ons87rp375p1pq8q066o8p56or1sqsps6rs17r4384q9748qr1r52.699p1r741q737393648s29917o45p16q50rn517rnsp73pp68p1q259s92693qp.s607408539s0p06p7559os0899866344r7qq7rpns960o9576q65.r5n94r5so9784pq1.i.03.s.sophosxl.net
The problem was that QNameLength is a signed byte and therefore its not possible to count up to 255. Additionally we need 256 bytes for the QName string to accommodate for the zero termination.
With LittleFS the `fs.exists(path)` returns true also on folders. A `isDirectory()` call is required to set _isFile to false on directories.
This enables serving all files from a folder like : `server->serveStatic("/", LittleFS, "/", cacheHeader.c_str());
File f = fs.open(path);
_isFile = (f && (! f.isDirectory()));
Reliability fix for autoReconnect when assoc_fail, autoReconnect did not work before for these failures.
Changes behavior of WIFI_REASON_ASSOC_FAIL event when autoReconnect is set, removes WIFI_REASON_ASSOC_FAIL/WL_CONNECT_FAILED so retry waitforconnectresult loop stays active for the retry, was not working before.
* change parameter to signed int
As of wrong paramater, the following problem existed, that will be fixed now with this change.
BTScanResultsSet.cpp:67:8: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (i < 0)
* Change parameter and variable to int
As of wrong paramater, the following problem existed, that will be fixed now with this change.
BTScanResultsSet.cpp:67:8: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (i < 0)
* Revert "Examples update, add a note for configTime() that only one ntp server is supported by lwip",
fixed in espressif/esp32-arduino-lib-builder#51
This reverts commit 6b1020967a171c549b3d956825fd0d395de9cce0.
* SimpleTime: add NTPoDHCP option and TimeZone env variable
Summary
This PR is refactoring of SigmaDelta HAL in order to use IDF instead of current Register manipulation approach.
Impact
Change in API:
uint32_t sigmaDeltaSetup(uint8_t channel, uint32_t freq);
changed to -->
uint32_t sigmaDeltaSetup(uint8_t pin, uint8_t channel, uint32_t freq);
void sigmaDeltaAttachPin(uint8_t pin); removed, no longer needed. Pin is attached in sigmaDeltaSetup()
Summary
RMT HAL refactoring based on IDF.
Impact
Improves RMT by adding IDF v4.4 support.
Receiving RMT can handle any size of data.
rmtInit() has a new parameter - RxBufferSize - to hold any number of data when receiving RMT.
rmtWrite() has a new parameter - wait_tx_done - to block writing until sending all data.
Related links
fix#5905
23 Braille Display Page (0x41)
Braille display allow visually impaired computer users to read out text using raised pins. The pins are electro-mechanically
activated. These devices also have support for controls that help navigate the computer screen. Typically, braille displays
interface with software known as a screen reader in order to perform this navigation.
## Summary
Arduino ```setup()``` and ```loop()``` run under a Task with a fixed Stack size of 8KB.
Users may want to change this size.
This PR adds this possibility by just adding a line of code, as for example:
``` dart
ESP_LOOP_TASK_STACK_SIZE(16384);
void setup() {
}
void loop() {
}
```
## Impact
None. It adds a new functionality to ESP32 Arduino.
If ```ESP_LOOP_TASK_STACK_SIZE(newSize);``` is not declared/used, it will compile the sketch with the default stack size of 8KB.
## Related links
fix#6010https://github.com/espressif/arduino-esp32/issues/6010#issuecomment-992701658
Thanks @igrr for the suggestion!
* Refactoring function headers
Changing the header so the main TwoWire::requestFrom() definition uses a `size_t` instead of a `uint8_t`, removing the 255 bytes limit on I2C requests.
Co-authored-by: Flaviu Tamas <me@flaviutamas.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* using ksz8081 only from ESP-IDF 4.4 onwards
The previous assertion only considerate the existance of ESP-IDF 4.3, but with the ESP-IDF 4.3.1 release this assertion would generate errors. Now only includes from ESP-IDF 4.4 onwards.
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Current implementation clears _headers when request was sent. If the
user added custom request headers, they will be lost and the redirected
request will not contain them. This commit changes the scope of cleanup
so that the headers survive redirects but don't survive connection
reuse.
1.0.6 changed scanning method to always scan all available channels during connect. This results in results in connect taking about ~3 seconds instead of ~1. This patch changes the behavior to use WIFI_FAST_SCAN if client used a specific channel.
Summary
Only affects ETH (not WiFi)
This PR solves #5733 by allowing the DHCP IDF server to complete its tasks and only then it sets a static IP.
This also solves another related failure reported in this issue (#5733 (comment)).
fix#5733
Impact
Adds a delay in order to wait for DHCP to actually terminate before setting the static IP configuration in ETH.
When using the FTM examples I got an error in the FTM_Initiator.ino:
*"wifi:channel=0 is invalid"*
I solved it for myself by simply passing the channel argument to be 1 in *WiFi.initiateFTM*. However, a better fix would be to directly change the default channel here.
* examples: WiFi and Ethernet examples organization
* examples: Change on CI scripts to include new folder
* Library name reverted to WiFi
* examples: WiFi and Ethernet examples organization in a new folder
* examples: Eth files moved from WiFi to Ethernet lib and CMakeLists updated
The client always appends "Basic" to the authorization header, however there are other auth schemes that can be used: https://developer.mozilla.org/en-US/docs/Web/HTTP/Authentication
For example "Bearer" when using OAuth.
This PR adds a `setAuthorizationType` method to the HTTPClient which allows this scheme to be configured by the caller. Authorization type is set to "Basic" by default so this will have no impact on existing usecases.
This adds a function to WiFiClientSecure to set the ALPN protocol.
This is required for an MQTT client to connect to AWS IoT when using an AWS Custom Authorizer, as described here.
Example code snippet:
...
WiFiClientSecure wiFiClient;
// ALPN protocol, needed with AWS custom authorizer
const char *aws_protos[] = {"mqtt", NULL};
void setup() {
wiFiClient.setCACert(AWSCAPEM);
wiFiClient.setAlpnProtocols(aws_protos);
}
...
Summary
Related to the issue #5773 and #2280.
_user_defined_size is removed from EEPROMClass because it is redundant in the current code
EEPROMClass::length() returns _size that is the true available size of EEPROM
Impact
_user_defined_size is removed from EEPROMClass
EEPROMClass::length() returns _size that is the true available size of EEPROM
Summary
Modifies WiFi lib to allow dynamic buffer allocation along with SPIRAM MALLOC enabled
This gives more heap space to the users
Related PR in Arduino Lib Builder: espressif/esp32-arduino-lib-builder#47
Impact
WiFi will work the same as it was in version 1.0.6, restoring free heap.
close#5630close#5474close#5699close#5697
* SPI.h add new call to return a SS pin number used.
As code example states, the SS pin needs to be explicitly set for output for SPI to work, but the pin number have to be coded in addition to the SPI logic in the library, which means this duplicates code. It is much better to just be able to get the pin number from library itself.
* Update SPI_Multiple_Buses.ino to use new pinSS method
Simplify the example case, to show usage of pinSS method. This also simplifies the example, removing duplicated code.
