* Fixes USB CDC setRxBufferSize(), begin(), _onRX()
* Fixes SetRxBufferSize(0) with end()
* Fixes reset when 2x call to end()
* Adds RX_OVERFLOW_EVENT and Queue Copy in setBufferSize
* changed event name to ARDUINO_USB_CDC_RX_OVERFLOW_EVENT
Summary
The examples demonstrate how to create a WPA2 Enterprise connection, but it requires using various direct esp_idf functions. This patch is intended to create another overloaded version of the WiFi.begin() function that allows a user to create a WPA2 Enterprise connection in much the same way as different kinds of connections.
My only question for the core maintainers is whether I should leave those #ifdef's in there. I added them so that it was easy to disable all the code I added via defines from my platformio.ini file, but they technically aren't necessary.
Impact
This should make it easier for novice users to create WPA2 Enterprise connections. For my university, I didn't need a root certificate or the client certificate or client key, so I haven't been able to debug those scenarios, but I built the begin functions to allow any one of those to be used, if needed.
I can confirm that eduroam-style WPA2 Enterprise networks that only require authentication with a username and password works as expected.
In my project I'm getting the error
```
In file included from lib/Discovery/Discovery.cpp:2:
C:/Users/David/.platformio/packages/framework-arduinoespressif32/libraries/AsyncUDP/src/AsyncUDP.h:47:1: error: expected class-name before '{' token
```
Adding a reference to Stream.h fixes it.
* Added dual antenna for WiFi (based on the ESP32-WROOM-DA module)
* Fixed build error
* Fixed indentation and renamed function to setDualAntennaConfig
* Added the RX and TX selection modes as configuration
* Mode code optimization
Summary
Touch Sensor refactoring to be based on IDF 4.4.
Adds support to ESP32S2 and future ESP32S3.
Adds some new APIs:
For all chips:
void touchAttachInterruptArg(uint8_t pin, void (*userFunc)(void*), void *arg, uint32_t threshold);
This function allows the user to add and pass a void* parameter to the ISR user callback.
void touchDetachInterrupt(uint8_t pin);
This function detaches ISR call back for the touch pad pin.
Only ESP32 chip
void touchInterruptSetThresholdDirection(bool mustbeLower);
This function allows the user to set if the ISR callback will be activated when the touch sensor readings are lower or higher than the threshold defined. See example TouchButton.ino.
Only ESP32-S2 and ESP32-S3 chips
bool touchInterruptGetLastStatus(uint8_t pin);
This function reports if the touch pad pin is touched or untouched. It can be used with ISR to identify when it is touched and untouched (released). See example TouchButtonV2.ino.
Impact
None. ll original APIs and examples now run on ESP32 and ESP32-S2.
Related links
Fix#6095Fix#6034Fix#5799Fix#5745Fix#5527Fix#5493Fix#4321Fix#4044Fix#2722Fix#2625
CaptivePortal.ino example did randomly crash for me ... so I start investigate ;-)
Decoding stack results
0x4016faea: WiFiUDP::write(unsigned char const*, unsigned int) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\libraries\WiFi\src\WiFiUdp.cpp line 201
0x400d4a4a: DNSServer::replyWithIP() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 187
0x400d4d01: DNSServer::processNextRequest() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 117
0x400d3e81: loop() at D:\Drive\Dokumente\HTL_Lehrer\2021_22\Projekte\Stromzaehler_Patrick\arduino/arduino.ino line 1078
0x400dd545: loopTask(void*) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\cores\esp32\main.cpp line 37
0x4008a0de: vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/port.c line 143
I found with wireshark a possibility to trigger the crash on demand is:
nslookup 3.1o1osr0092ons87rp375p1pq8q066o8p56or1sqsps6rs17r4384q9748qr1r52.699p1r741q737393648s29917o45p16q50rn517rnsp73pp68p1q259s92693qp.s607408539s0p06p7559os0899866344r7qq7rpns960o9576q65.r5n94r5so9784pq1.i.03.s.sophosxl.net
The problem was that QNameLength is a signed byte and therefore its not possible to count up to 255. Additionally we need 256 bytes for the QName string to accommodate for the zero termination.
With LittleFS the `fs.exists(path)` returns true also on folders. A `isDirectory()` call is required to set _isFile to false on directories.
This enables serving all files from a folder like : `server->serveStatic("/", LittleFS, "/", cacheHeader.c_str());
File f = fs.open(path);
_isFile = (f && (! f.isDirectory()));
Reliability fix for autoReconnect when assoc_fail, autoReconnect did not work before for these failures.
Changes behavior of WIFI_REASON_ASSOC_FAIL event when autoReconnect is set, removes WIFI_REASON_ASSOC_FAIL/WL_CONNECT_FAILED so retry waitforconnectresult loop stays active for the retry, was not working before.
* change parameter to signed int
As of wrong paramater, the following problem existed, that will be fixed now with this change.
BTScanResultsSet.cpp:67:8: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (i < 0)
* Change parameter and variable to int
As of wrong paramater, the following problem existed, that will be fixed now with this change.
BTScanResultsSet.cpp:67:8: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (i < 0)
* Revert "Examples update, add a note for configTime() that only one ntp server is supported by lwip",
fixed in espressif/esp32-arduino-lib-builder#51
This reverts commit 6b1020967a171c549b3d956825fd0d395de9cce0.
* SimpleTime: add NTPoDHCP option and TimeZone env variable
Summary
This PR is refactoring of SigmaDelta HAL in order to use IDF instead of current Register manipulation approach.
Impact
Change in API:
uint32_t sigmaDeltaSetup(uint8_t channel, uint32_t freq);
changed to -->
uint32_t sigmaDeltaSetup(uint8_t pin, uint8_t channel, uint32_t freq);
void sigmaDeltaAttachPin(uint8_t pin); removed, no longer needed. Pin is attached in sigmaDeltaSetup()
Summary
RMT HAL refactoring based on IDF.
Impact
Improves RMT by adding IDF v4.4 support.
Receiving RMT can handle any size of data.
rmtInit() has a new parameter - RxBufferSize - to hold any number of data when receiving RMT.
rmtWrite() has a new parameter - wait_tx_done - to block writing until sending all data.
Related links
fix#5905
23 Braille Display Page (0x41)
Braille display allow visually impaired computer users to read out text using raised pins. The pins are electro-mechanically
activated. These devices also have support for controls that help navigate the computer screen. Typically, braille displays
interface with software known as a screen reader in order to perform this navigation.
## Summary
Arduino ```setup()``` and ```loop()``` run under a Task with a fixed Stack size of 8KB.
Users may want to change this size.
This PR adds this possibility by just adding a line of code, as for example:
``` dart
ESP_LOOP_TASK_STACK_SIZE(16384);
void setup() {
}
void loop() {
}
```
## Impact
None. It adds a new functionality to ESP32 Arduino.
If ```ESP_LOOP_TASK_STACK_SIZE(newSize);``` is not declared/used, it will compile the sketch with the default stack size of 8KB.
## Related links
fix#6010https://github.com/espressif/arduino-esp32/issues/6010#issuecomment-992701658
Thanks @igrr for the suggestion!
* Refactoring function headers
Changing the header so the main TwoWire::requestFrom() definition uses a `size_t` instead of a `uint8_t`, removing the 255 bytes limit on I2C requests.
Co-authored-by: Flaviu Tamas <me@flaviutamas.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
