Private Key. Issue presented during any subsequent invocation of loadCACert, loadCertificate, and
loadPrivateKey, respectively, after the first invocation.
* Revert "Edited VFSFileImpl::read to use both read/fread (#6456)"
This reverts commit 7b89b39e10.
* Added default file buffer size + function to change it by user
* Fixes USB CDC setRxBufferSize(), begin(), _onRX()
* Fixes SetRxBufferSize(0) with end()
* Fixes reset when 2x call to end()
* Adds RX_OVERFLOW_EVENT and Queue Copy in setBufferSize
* changed event name to ARDUINO_USB_CDC_RX_OVERFLOW_EVENT
Summary
The examples demonstrate how to create a WPA2 Enterprise connection, but it requires using various direct esp_idf functions. This patch is intended to create another overloaded version of the WiFi.begin() function that allows a user to create a WPA2 Enterprise connection in much the same way as different kinds of connections.
My only question for the core maintainers is whether I should leave those #ifdef's in there. I added them so that it was easy to disable all the code I added via defines from my platformio.ini file, but they technically aren't necessary.
Impact
This should make it easier for novice users to create WPA2 Enterprise connections. For my university, I didn't need a root certificate or the client certificate or client key, so I haven't been able to debug those scenarios, but I built the begin functions to allow any one of those to be used, if needed.
I can confirm that eduroam-style WPA2 Enterprise networks that only require authentication with a username and password works as expected.
In my project I'm getting the error
```
In file included from lib/Discovery/Discovery.cpp:2:
C:/Users/David/.platformio/packages/framework-arduinoespressif32/libraries/AsyncUDP/src/AsyncUDP.h:47:1: error: expected class-name before '{' token
```
Adding a reference to Stream.h fixes it.
* Added dual antenna for WiFi (based on the ESP32-WROOM-DA module)
* Fixed build error
* Fixed indentation and renamed function to setDualAntennaConfig
* Added the RX and TX selection modes as configuration
* Mode code optimization
Summary
Touch Sensor refactoring to be based on IDF 4.4.
Adds support to ESP32S2 and future ESP32S3.
Adds some new APIs:
For all chips:
void touchAttachInterruptArg(uint8_t pin, void (*userFunc)(void*), void *arg, uint32_t threshold);
This function allows the user to add and pass a void* parameter to the ISR user callback.
void touchDetachInterrupt(uint8_t pin);
This function detaches ISR call back for the touch pad pin.
Only ESP32 chip
void touchInterruptSetThresholdDirection(bool mustbeLower);
This function allows the user to set if the ISR callback will be activated when the touch sensor readings are lower or higher than the threshold defined. See example TouchButton.ino.
Only ESP32-S2 and ESP32-S3 chips
bool touchInterruptGetLastStatus(uint8_t pin);
This function reports if the touch pad pin is touched or untouched. It can be used with ISR to identify when it is touched and untouched (released). See example TouchButtonV2.ino.
Impact
None. ll original APIs and examples now run on ESP32 and ESP32-S2.
Related links
Fix#6095Fix#6034Fix#5799Fix#5745Fix#5527Fix#5493Fix#4321Fix#4044Fix#2722Fix#2625
CaptivePortal.ino example did randomly crash for me ... so I start investigate ;-)
Decoding stack results
0x4016faea: WiFiUDP::write(unsigned char const*, unsigned int) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\libraries\WiFi\src\WiFiUdp.cpp line 201
0x400d4a4a: DNSServer::replyWithIP() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 187
0x400d4d01: DNSServer::processNextRequest() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 117
0x400d3e81: loop() at D:\Drive\Dokumente\HTL_Lehrer\2021_22\Projekte\Stromzaehler_Patrick\arduino/arduino.ino line 1078
0x400dd545: loopTask(void*) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\cores\esp32\main.cpp line 37
0x4008a0de: vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/port.c line 143
I found with wireshark a possibility to trigger the crash on demand is:
nslookup 3.1o1osr0092ons87rp375p1pq8q066o8p56or1sqsps6rs17r4384q9748qr1r52.699p1r741q737393648s29917o45p16q50rn517rnsp73pp68p1q259s92693qp.s607408539s0p06p7559os0899866344r7qq7rpns960o9576q65.r5n94r5so9784pq1.i.03.s.sophosxl.net
The problem was that QNameLength is a signed byte and therefore its not possible to count up to 255. Additionally we need 256 bytes for the QName string to accommodate for the zero termination.
With LittleFS the `fs.exists(path)` returns true also on folders. A `isDirectory()` call is required to set _isFile to false on directories.
This enables serving all files from a folder like : `server->serveStatic("/", LittleFS, "/", cacheHeader.c_str());
File f = fs.open(path);
_isFile = (f && (! f.isDirectory()));
