espressif/arduino-esp32
1
0
Fork 1
mirror of https://github.com/0xFEEDC0DE64/arduino-esp32.git synced 2025-06-27 02:41:34 +02:00
Code Issues Packages Projects Releases Wiki Activity
Files
master
arduino-esp32/cores/esp32/HardwareSerial.cpp
Gonzalo Brusco ed33e15752 Adjustable Serial Event Task Stack Size And Priority (#6685) 
* Adjustable Serial Event Task Stack Size And Priority

* Added options to Kconfig

* Added Core Affinity

* Added CONFIG_FREERTOS_UNICORE

* Removed _CONFIG from FREERTOS_UNICORE

* Fixing Core choice for OnReceive() 

Makes it alligned to changes in #6718
Also eliminates conflict with #6718 for merging

Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
2022-05-13 13:57:13 +03:00

534 lines
15 KiB
C++
Raw Permalink Blame History

#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <inttypes.h>
#include "pins_arduino.h"
#include "HardwareSerial.h"
#include "soc/soc_caps.h"
#include "driver/uart.h"
#include "freertos/queue.h"
#ifndef ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE
#define ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE 2048
#endif
#ifndef ARDUINO_SERIAL_EVENT_TASK_PRIORITY
#define ARDUINO_SERIAL_EVENT_TASK_PRIORITY (configMAX_PRIORITIES-1)
#endif
#ifndef ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE
#define ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE -1
#endif
#ifndef SOC_RX0
#if CONFIG_IDF_TARGET_ESP32
#define SOC_RX0 3
#elif CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
#define SOC_RX0 44
#elif CONFIG_IDF_TARGET_ESP32C3
#define SOC_RX0 20
#endif
#endif
#ifndef SOC_TX0
#if CONFIG_IDF_TARGET_ESP32
#define SOC_TX0 1
#elif CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
#define SOC_TX0 43
#elif CONFIG_IDF_TARGET_ESP32C3
#define SOC_TX0 21
#endif
#endif
void serialEvent(void) __attribute__((weak));
void serialEvent(void) {}
#if SOC_UART_NUM > 1
#ifndef RX1
#if CONFIG_IDF_TARGET_ESP32
#define RX1 9
#elif CONFIG_IDF_TARGET_ESP32S2
#define RX1 18
#elif CONFIG_IDF_TARGET_ESP32C3
#define RX1 18
#elif CONFIG_IDF_TARGET_ESP32S3
#define RX1 15
#endif
#endif
#ifndef TX1
#if CONFIG_IDF_TARGET_ESP32
#define TX1 10
#elif CONFIG_IDF_TARGET_ESP32S2
#define TX1 17
#elif CONFIG_IDF_TARGET_ESP32C3
#define TX1 19
#elif CONFIG_IDF_TARGET_ESP32S3
#define TX1 16
#endif
#endif
void serialEvent1(void) __attribute__((weak));
void serialEvent1(void) {}
#endif /* SOC_UART_NUM > 1 */
#if SOC_UART_NUM > 2
#ifndef RX2
#if CONFIG_IDF_TARGET_ESP32
#define RX2 16
#elif CONFIG_IDF_TARGET_ESP32S3
#define RX2 19
#endif
#endif
#ifndef TX2
#if CONFIG_IDF_TARGET_ESP32
#define TX2 17
#elif CONFIG_IDF_TARGET_ESP32S3
#define TX2 20
#endif
#endif
void serialEvent2(void) __attribute__((weak));
void serialEvent2(void) {}
#endif /* SOC_UART_NUM > 2 */
#if !defined(NO_GLOBAL_INSTANCES) && !defined(NO_GLOBAL_SERIAL)
#if ARDUINO_USB_CDC_ON_BOOT //Serial used for USB CDC
HardwareSerial Serial0(0);
#else
HardwareSerial Serial(0);
#endif
#if SOC_UART_NUM > 1
HardwareSerial Serial1(1);
#endif
#if SOC_UART_NUM > 2
HardwareSerial Serial2(2);
#endif
void serialEventRun(void)
{
#if ARDUINO_USB_CDC_ON_BOOT //Serial used for USB CDC
if(Serial0.available()) serialEvent();
#else
if(Serial.available()) serialEvent();
#endif
#if SOC_UART_NUM > 1
if(Serial1.available()) serialEvent1();
#endif
#if SOC_UART_NUM > 2
if(Serial2.available()) serialEvent2();
#endif
}
#endif
#if !CONFIG_DISABLE_HAL_LOCKS
#define HSERIAL_MUTEX_LOCK() do {} while (xSemaphoreTake(_lock, portMAX_DELAY) != pdPASS)
#define HSERIAL_MUTEX_UNLOCK() xSemaphoreGive(_lock)
#else
#define HSERIAL_MUTEX_LOCK()
#define HSERIAL_MUTEX_UNLOCK()
#endif
HardwareSerial::HardwareSerial(int uart_nr) :
_uart_nr(uart_nr),
_uart(NULL),
_rxBufferSize(256),
_txBufferSize(0),
_onReceiveCB(NULL),
_onReceiveErrorCB(NULL),
_onReceiveTimeout(true),
_rxTimeout(10),
_eventTask(NULL)
#if !CONFIG_DISABLE_HAL_LOCKS
,_lock(NULL)
#endif
{
#if !CONFIG_DISABLE_HAL_LOCKS
if(_lock == NULL){
_lock = xSemaphoreCreateMutex();
if(_lock == NULL){
log_e("xSemaphoreCreateMutex failed");
return;
}
}
#endif
}
HardwareSerial::~HardwareSerial()
{
end();
#if !CONFIG_DISABLE_HAL_LOCKS
if(_lock != NULL){
vSemaphoreDelete(_lock);
}
#endif
}
void HardwareSerial::_createEventTask(void *args)
{
// Creating UART event Task
xTaskCreateUniversal(_uartEventTask, "uart_event_task", ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE, this, ARDUINO_SERIAL_EVENT_TASK_PRIORITY, &_eventTask, ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE);
if (_eventTask == NULL) {
log_e(" -- UART%d Event Task not Created!", _uart_nr);
}
}
void HardwareSerial::_destroyEventTask(void)
{
if (_eventTask != NULL) {
vTaskDelete(_eventTask);
_eventTask = NULL;
}
}
void HardwareSerial::onReceiveError(OnReceiveErrorCb function)
{
HSERIAL_MUTEX_LOCK();
// function may be NULL to cancel onReceive() from its respective task
_onReceiveErrorCB = function;
// this can be called after Serial.begin(), therefore it shall create the event task
if (function != NULL && _uart != NULL && _eventTask == NULL) {
_createEventTask(this);
}
HSERIAL_MUTEX_UNLOCK();
}
void HardwareSerial::onReceive(OnReceiveCb function, bool onlyOnTimeout)
{
HSERIAL_MUTEX_LOCK();
// function may be NULL to cancel onReceive() from its respective task
_onReceiveCB = function;
// When Rx timeout is Zero (disabled), there is only one possible option that is callback when FIFO reaches 120 bytes
_onReceiveTimeout = _rxTimeout > 0 ? onlyOnTimeout : false;
// this can be called after Serial.begin(), therefore it shall create the event task
if (function != NULL && _uart != NULL && _eventTask == NULL) {
_createEventTask(this); // Create event task
}
HSERIAL_MUTEX_UNLOCK();
}
// timout is calculates in time to receive UART symbols at the UART baudrate.
// the estimation is about 11 bits per symbol (SERIAL_8N1)
void HardwareSerial::setRxTimeout(uint8_t symbols_timeout)
{
HSERIAL_MUTEX_LOCK();
// Zero disables timeout, thus, onReceive callback will only be called when RX FIFO reaches 120 bytes
// Any non-zero value will activate onReceive callback based on UART baudrate with about 11 bits per symbol
_rxTimeout = symbols_timeout;
if (!symbols_timeout) _onReceiveTimeout = false; // only when RX timeout is disabled, we also must disable this flag
if(_uart != NULL) uart_set_rx_timeout(_uart_nr, _rxTimeout); // Set new timeout
HSERIAL_MUTEX_UNLOCK();
}
void HardwareSerial::eventQueueReset()
{
QueueHandle_t uartEventQueue = NULL;
if (_uart == NULL) {
return;
}
uartGetEventQueue(_uart, &uartEventQueue);
if (uartEventQueue != NULL) {
xQueueReset(uartEventQueue);
}
}
void HardwareSerial::_uartEventTask(void *args)
{
HardwareSerial *uart = (HardwareSerial *)args;
uart_event_t event;
QueueHandle_t uartEventQueue = NULL;
uartGetEventQueue(uart->_uart, &uartEventQueue);
if (uartEventQueue != NULL) {
for(;;) {
//Waiting for UART event.
if(xQueueReceive(uartEventQueue, (void * )&event, (portTickType)portMAX_DELAY)) {
switch(event.type) {
case UART_DATA:
if(uart->_onReceiveCB && uart->available() > 0 &&
((uart->_onReceiveTimeout && event.timeout_flag) || !uart->_onReceiveTimeout) )
uart->_onReceiveCB();
break;
case UART_FIFO_OVF:
log_w("UART%d FIFO Overflow. Consider adding Hardware Flow Control to your Application.", uart->_uart_nr);
if(uart->_onReceiveErrorCB) uart->_onReceiveErrorCB(UART_FIFO_OVF_ERROR);
break;
case UART_BUFFER_FULL:
log_w("UART%d Buffer Full. Consider increasing your buffer size of your Application.", uart->_uart_nr);
if(uart->_onReceiveErrorCB) uart->_onReceiveErrorCB(UART_BUFFER_FULL_ERROR);
break;
case UART_BREAK:
log_w("UART%d RX break.", uart->_uart_nr);
if(uart->_onReceiveErrorCB) uart->_onReceiveErrorCB(UART_BREAK_ERROR);
break;
case UART_PARITY_ERR:
log_w("UART%d parity error.", uart->_uart_nr);
if(uart->_onReceiveErrorCB) uart->_onReceiveErrorCB(UART_PARITY_ERROR);
break;
case UART_FRAME_ERR:
log_w("UART%d frame error.", uart->_uart_nr);
if(uart->_onReceiveErrorCB) uart->_onReceiveErrorCB(UART_FRAME_ERROR);
break;
default:
log_w("UART%d unknown event type %d.", uart->_uart_nr, event.type);
break;
}
}
}
}
vTaskDelete(NULL);
}
void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, int8_t txPin, bool invert, unsigned long timeout_ms, uint8_t rxfifo_full_thrhd)
{
if(0 > _uart_nr || _uart_nr >= SOC_UART_NUM) {
log_e("Serial number is invalid, please use numers from 0 to %u", SOC_UART_NUM - 1);
return;
}
#if !CONFIG_DISABLE_HAL_LOCKS
if(_lock == NULL){
log_e("MUTEX Lock failed. Can't begin.");
return;
}
#endif
HSERIAL_MUTEX_LOCK();
// First Time or after end() --> set default Pins
if (!uartIsDriverInstalled(_uart)) {
switch (_uart_nr) {
case UART_NUM_0:
if (rxPin < 0 && txPin < 0) {
rxPin = SOC_RX0;
txPin = SOC_TX0;
}
break;
#if SOC_UART_NUM > 1 // may save some flash bytes...
case UART_NUM_1:
if (rxPin < 0 && txPin < 0) {
rxPin = RX1;
txPin = TX1;
}
break;
#endif
#if SOC_UART_NUM > 2 // may save some flash bytes...
case UART_NUM_2:
if (rxPin < 0 && txPin < 0) {
rxPin = RX2;
txPin = TX2;
}
break;
#endif
default:
log_e("Bad UART Number");
return;
}
}
if(_uart) {
// in this case it is a begin() over a previous begin() - maybe to change baud rate
// thus do not disable debug output
end(false);
}
// IDF UART driver keeps Pin setting on restarting. Negative Pin number will keep it unmodified.
_uart = uartBegin(_uart_nr, baud ? baud : 9600, config, rxPin, txPin, _rxBufferSize, _txBufferSize, invert, rxfifo_full_thrhd);
if (!baud) {
// using baud rate as zero, forces it to try to detect the current baud rate in place
uartStartDetectBaudrate(_uart);
time_t startMillis = millis();
unsigned long detectedBaudRate = 0;
while(millis() - startMillis < timeout_ms && !(detectedBaudRate = uartDetectBaudrate(_uart))) {
yield();
}
end(false);
if(detectedBaudRate) {
delay(100); // Give some time...
_uart = uartBegin(_uart_nr, detectedBaudRate, config, rxPin, txPin, _rxBufferSize, _txBufferSize, invert, rxfifo_full_thrhd);
} else {
log_e("Could not detect baudrate. Serial data at the port must be present within the timeout for detection to be possible");
_uart = NULL;
}
}
// create a task to deal with Serial Events when, for example, calling begin() twice to change the baudrate,
// or when setting the callback before calling begin()
if (_uart != NULL && (_onReceiveCB != NULL || _onReceiveErrorCB != NULL) && _eventTask == NULL) {
_createEventTask(this);
}
// Set UART RX timeout
if (_uart != NULL) {
uart_set_rx_timeout(_uart_nr, _rxTimeout);
}
HSERIAL_MUTEX_UNLOCK();
}
void HardwareSerial::updateBaudRate(unsigned long baud)
{
uartSetBaudRate(_uart, baud);
}
void HardwareSerial::end(bool fullyTerminate)
{
// default Serial.end() will completely disable HardwareSerial,
// including any tasks or debug message channel (log_x()) - but not for IDF log messages!
if(fullyTerminate) {
_onReceiveCB = NULL;
_onReceiveErrorCB = NULL;
if (uartGetDebug() == _uart_nr) {
uartSetDebug(0);
}
}
delay(10);
uartEnd(_uart);
_uart = 0;
_destroyEventTask();
}
void HardwareSerial::setDebugOutput(bool en)
{
if(_uart == 0) {
return;
}
if(en) {
uartSetDebug(_uart);
} else {
if(uartGetDebug() == _uart_nr) {
uartSetDebug(NULL);
}
}
}
int HardwareSerial::available(void)
{
return uartAvailable(_uart);
}
int HardwareSerial::availableForWrite(void)
{
return uartAvailableForWrite(_uart);
}
int HardwareSerial::peek(void)
{
if (available()) {
return uartPeek(_uart);
}
return -1;
}
int HardwareSerial::read(void)
{
if(available()) {
return uartRead(_uart);
}
return -1;
}
// read characters into buffer
// terminates if size characters have been read, or no further are pending
// returns the number of characters placed in the buffer
// the buffer is NOT null terminated.
size_t HardwareSerial::read(uint8_t *buffer, size_t size)
{
size_t avail = available();
if (size < avail) {
avail = size;
}
size_t count = 0;
while(count < avail) {
*buffer++ = uartRead(_uart);
count++;
}
return count;
}
void HardwareSerial::flush(void)
{
uartFlush(_uart);
}
void HardwareSerial::flush(bool txOnly)
{
uartFlushTxOnly(_uart, txOnly);
}
size_t HardwareSerial::write(uint8_t c)
{
uartWrite(_uart, c);
return 1;
}
size_t HardwareSerial::write(const uint8_t *buffer, size_t size)
{
uartWriteBuf(_uart, buffer, size);
return size;
}
uint32_t HardwareSerial::baudRate()
{
return uartGetBaudRate(_uart);
}
HardwareSerial::operator bool() const
{
return uartIsDriverInstalled(_uart);
}
void HardwareSerial::setRxInvert(bool invert)
{
uartSetRxInvert(_uart, invert);
}
// negative Pin value will keep it unmodified
void HardwareSerial::setPins(int8_t rxPin, int8_t txPin, int8_t ctsPin, int8_t rtsPin)
{
uartSetPins(_uart, rxPin, txPin, ctsPin, rtsPin);
}
// Enables or disables Hardware Flow Control using RTS and/or CTS pins (must use setAllPins() before)
void HardwareSerial::setHwFlowCtrlMode(uint8_t mode, uint8_t threshold)
{
uartSetHwFlowCtrlMode(_uart, mode, threshold);
}
size_t HardwareSerial::setRxBufferSize(size_t new_size) {
if (_uart) {
log_e("RX Buffer can't be resized when Serial is already running.\n");
return 0;
}
if (new_size <= SOC_UART_FIFO_LEN) {
log_e("RX Buffer must be higher than %d.\n", SOC_UART_FIFO_LEN); // ESP32, S2, S3 and C3 means higher than 128
return 0;
}
_rxBufferSize = new_size;
return _rxBufferSize;
}
size_t HardwareSerial::setTxBufferSize(size_t new_size) {
if (_uart) {
log_e("TX Buffer can't be resized when Serial is already running.\n");
return 0;
}
if (new_size <= SOC_UART_FIFO_LEN) {
log_e("TX Buffer must be higher than %d.\n", SOC_UART_FIFO_LEN); // ESP32, S2, S3 and C3 means higher than 128
return 0;
}
_txBufferSize = new_size;
return _txBufferSize;
}
Reference in New Issue View Git Blame Copy Permalink