mirror of
https://github.com/0xFEEDC0DE64/arduino-esp32.git
synced 2025-11-03 23:51:39 +01:00
273 lines
8.1 KiB
C
273 lines
8.1 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#include "esp32-hal-gpio.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "rom/ets_sys.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_intr.h"
|
|
#include "rom/gpio.h"
|
|
#include "soc/gpio_reg.h"
|
|
#include "soc/io_mux_reg.h"
|
|
#include "soc/gpio_struct.h"
|
|
#include "soc/rtc_io_reg.h"
|
|
|
|
#define ETS_GPIO_INUM 12
|
|
|
|
const int8_t esp32_adc2gpio[20] = {36, -1, -1, 39, 32, 33, 34, 35, -1, -1, 4, 0, 2, 15, 13, 12, 14, 27, 25, 26};
|
|
|
|
const DRAM_ATTR esp32_gpioMux_t esp32_gpioMux[GPIO_PIN_COUNT]={
|
|
{0x44, 11, 11, 1},
|
|
{0x88, -1, -1, -1},
|
|
{0x40, 12, 12, 2},
|
|
{0x84, -1, -1, -1},
|
|
{0x48, 10, 10, 0},
|
|
{0x6c, -1, -1, -1},
|
|
{0x60, -1, -1, -1},
|
|
{0x64, -1, -1, -1},
|
|
{0x68, -1, -1, -1},
|
|
{0x54, -1, -1, -1},
|
|
{0x58, -1, -1, -1},
|
|
{0x5c, -1, -1, -1},
|
|
{0x34, 15, 15, 5},
|
|
{0x38, 14, 14, 4},
|
|
{0x30, 16, 16, 6},
|
|
{0x3c, 13, 13, 3},
|
|
{0x4c, -1, -1, -1},
|
|
{0x50, -1, -1, -1},
|
|
{0x70, -1, -1, -1},
|
|
{0x74, -1, -1, -1},
|
|
{0x78, -1, -1, -1},
|
|
{0x7c, -1, -1, -1},
|
|
{0x80, -1, -1, -1},
|
|
{0x8c, -1, -1, -1},
|
|
{0, -1, -1, -1},
|
|
{0x24, 6, 18, -1}, //DAC1
|
|
{0x28, 7, 19, -1}, //DAC2
|
|
{0x2c, 17, 17, 7},
|
|
{0, -1, -1, -1},
|
|
{0, -1, -1, -1},
|
|
{0, -1, -1, -1},
|
|
{0, -1, -1, -1},
|
|
{0x1c, 9, 4, 9},
|
|
{0x20, 8, 5, 8},
|
|
{0x14, 4, 6, -1},
|
|
{0x18, 5, 7, -1},
|
|
{0x04, 0, 0, -1},
|
|
{0x08, 1, -1, -1},
|
|
{0x0c, 2, -1, -1},
|
|
{0x10, 3, 3, -1}
|
|
};
|
|
|
|
typedef void (*voidFuncPtr)(void);
|
|
static voidFuncPtr __pinInterruptHandlers[GPIO_PIN_COUNT] = {0,};
|
|
|
|
#include "driver/rtc_io.h"
|
|
|
|
extern void IRAM_ATTR __pinMode(uint8_t pin, uint8_t mode)
|
|
{
|
|
|
|
if(!digitalPinIsValid(pin)) {
|
|
return;
|
|
}
|
|
|
|
uint32_t rtc_reg = rtc_gpio_desc[pin].reg;
|
|
if(mode == ANALOG) {
|
|
if(!rtc_reg) {
|
|
return;//not rtc pin
|
|
}
|
|
//lock rtc
|
|
uint32_t reg_val = ESP_REG(rtc_reg);
|
|
if(reg_val & rtc_gpio_desc[pin].mux){
|
|
return;//already in adc mode
|
|
}
|
|
reg_val &= ~(
|
|
(RTC_IO_TOUCH_PAD1_FUN_SEL_V << rtc_gpio_desc[pin].func)
|
|
|rtc_gpio_desc[pin].ie
|
|
|rtc_gpio_desc[pin].pullup
|
|
|rtc_gpio_desc[pin].pulldown);
|
|
ESP_REG(RTC_GPIO_ENABLE_W1TC_REG) = (1 << (rtc_gpio_desc[pin].rtc_num + RTC_GPIO_ENABLE_W1TC_S));
|
|
ESP_REG(rtc_reg) = reg_val | rtc_gpio_desc[pin].mux;
|
|
//unlock rtc
|
|
ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = ((uint32_t)2 << MCU_SEL_S) | ((uint32_t)2 << FUN_DRV_S) | FUN_IE;
|
|
return;
|
|
}
|
|
|
|
//RTC pins PULL settings
|
|
if(rtc_reg) {
|
|
//lock rtc
|
|
ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_gpio_desc[pin].mux);
|
|
if(mode & PULLUP) {
|
|
ESP_REG(rtc_reg) = (ESP_REG(rtc_reg) | rtc_gpio_desc[pin].pullup) & ~(rtc_gpio_desc[pin].pulldown);
|
|
} else if(mode & PULLDOWN) {
|
|
ESP_REG(rtc_reg) = (ESP_REG(rtc_reg) | rtc_gpio_desc[pin].pulldown) & ~(rtc_gpio_desc[pin].pullup);
|
|
} else {
|
|
ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_gpio_desc[pin].pullup | rtc_gpio_desc[pin].pulldown);
|
|
}
|
|
//unlock rtc
|
|
}
|
|
|
|
uint32_t pinFunction = 0, pinControl = 0;
|
|
|
|
//lock gpio
|
|
if(mode & INPUT) {
|
|
if(pin < 32) {
|
|
GPIO.enable_w1tc = ((uint32_t)1 << pin);
|
|
} else {
|
|
GPIO.enable1_w1tc.val = ((uint32_t)1 << (pin - 32));
|
|
}
|
|
} else if(mode & OUTPUT) {
|
|
if(pin > 33){
|
|
//unlock gpio
|
|
return;//pins above 33 can be only inputs
|
|
} else if(pin < 32) {
|
|
GPIO.enable_w1ts = ((uint32_t)1 << pin);
|
|
} else {
|
|
GPIO.enable1_w1ts.val = ((uint32_t)1 << (pin - 32));
|
|
}
|
|
}
|
|
|
|
if(mode & PULLUP) {
|
|
pinFunction |= FUN_PU;
|
|
} else if(mode & PULLDOWN) {
|
|
pinFunction |= FUN_PD;
|
|
}
|
|
|
|
pinFunction |= ((uint32_t)2 << FUN_DRV_S);//what are the drivers?
|
|
pinFunction |= FUN_IE;//input enable but required for output as well?
|
|
|
|
if(mode & (INPUT | OUTPUT)) {
|
|
pinFunction |= ((uint32_t)2 << MCU_SEL_S);
|
|
} else if(mode == SPECIAL) {
|
|
pinFunction |= ((uint32_t)(((pin)==1||(pin)==3)?0:1) << MCU_SEL_S);
|
|
} else {
|
|
pinFunction |= ((uint32_t)(mode >> 5) << MCU_SEL_S);
|
|
}
|
|
|
|
ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = pinFunction;
|
|
|
|
if(mode & OPEN_DRAIN) {
|
|
pinControl = (1 << GPIO_PIN0_PAD_DRIVER_S);
|
|
}
|
|
|
|
GPIO.pin[pin].val = pinControl;
|
|
//unlock gpio
|
|
}
|
|
|
|
extern void IRAM_ATTR __digitalWrite(uint8_t pin, uint8_t val)
|
|
{
|
|
if(val) {
|
|
if(pin < 32) {
|
|
GPIO.out_w1ts = ((uint32_t)1 << pin);
|
|
} else if(pin < 34) {
|
|
GPIO.out1_w1ts.val = ((uint32_t)1 << (pin - 32));
|
|
}
|
|
} else {
|
|
if(pin < 32) {
|
|
GPIO.out_w1tc = ((uint32_t)1 << pin);
|
|
} else if(pin < 34) {
|
|
GPIO.out1_w1tc.val = ((uint32_t)1 << (pin - 32));
|
|
}
|
|
}
|
|
}
|
|
|
|
extern int IRAM_ATTR __digitalRead(uint8_t pin)
|
|
{
|
|
if(pin < 32) {
|
|
return (GPIO.in >> pin) & 0x1;
|
|
} else if(pin < 40) {
|
|
return (GPIO.in1.val >> (pin - 32)) & 0x1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void IRAM_ATTR __onPinInterrupt(void *arg)
|
|
{
|
|
uint32_t gpio_intr_status_l=0;
|
|
uint32_t gpio_intr_status_h=0;
|
|
|
|
gpio_intr_status_l = GPIO.status;
|
|
gpio_intr_status_h = GPIO.status1.val;
|
|
GPIO.status_w1tc = gpio_intr_status_l;//Clear intr for gpio0-gpio31
|
|
GPIO.status1_w1tc.val = gpio_intr_status_h;//Clear intr for gpio32-39
|
|
|
|
uint8_t pin=0;
|
|
if(gpio_intr_status_l) {
|
|
do {
|
|
if(gpio_intr_status_l & ((uint32_t)1 << pin)) {
|
|
if(__pinInterruptHandlers[pin]) {
|
|
__pinInterruptHandlers[pin]();
|
|
}
|
|
}
|
|
} while(++pin<32);
|
|
}
|
|
if(gpio_intr_status_h) {
|
|
pin=32;
|
|
do {
|
|
if(gpio_intr_status_h & ((uint32_t)1 << (pin - 32))) {
|
|
if(__pinInterruptHandlers[pin]) {
|
|
__pinInterruptHandlers[pin]();
|
|
}
|
|
}
|
|
} while(++pin<GPIO_PIN_COUNT);
|
|
}
|
|
}
|
|
|
|
extern void __attachInterrupt(uint8_t pin, voidFuncPtr userFunc, int intr_type)
|
|
{
|
|
static bool interrupt_initialized = false;
|
|
static int core_id = 0;
|
|
|
|
if(!interrupt_initialized) {
|
|
interrupt_initialized = true;
|
|
core_id = xPortGetCoreID();
|
|
ESP_INTR_DISABLE(ETS_GPIO_INUM);
|
|
intr_matrix_set(core_id, ETS_GPIO_INTR_SOURCE, ETS_GPIO_INUM);
|
|
xt_set_interrupt_handler(ETS_GPIO_INUM, &__onPinInterrupt, NULL);
|
|
ESP_INTR_ENABLE(ETS_GPIO_INUM);
|
|
}
|
|
__pinInterruptHandlers[pin] = userFunc;
|
|
//lock gpio
|
|
ESP_INTR_DISABLE(ETS_GPIO_INUM);
|
|
if(core_id) { //APP_CPU
|
|
GPIO.pin[pin].int_ena = 1;
|
|
} else { //PRO_CPU
|
|
GPIO.pin[pin].int_ena = 4;
|
|
}
|
|
GPIO.pin[pin].int_type = intr_type;
|
|
ESP_INTR_ENABLE(ETS_GPIO_INUM);
|
|
//unlock gpio
|
|
}
|
|
|
|
extern void __detachInterrupt(uint8_t pin)
|
|
{
|
|
//lock gpio
|
|
ESP_INTR_DISABLE(ETS_GPIO_INUM);
|
|
__pinInterruptHandlers[pin] = NULL;
|
|
GPIO.pin[pin].int_ena = 0;
|
|
GPIO.pin[pin].int_type = 0;
|
|
ESP_INTR_ENABLE(ETS_GPIO_INUM);
|
|
//unlock gpio
|
|
}
|
|
|
|
|
|
extern void pinMode(uint8_t pin, uint8_t mode) __attribute__ ((weak, alias("__pinMode")));
|
|
extern void digitalWrite(uint8_t pin, uint8_t val) __attribute__ ((weak, alias("__digitalWrite")));
|
|
extern int digitalRead(uint8_t pin) __attribute__ ((weak, alias("__digitalRead")));
|
|
extern void attachInterrupt(uint8_t pin, voidFuncPtr handler, int mode) __attribute__ ((weak, alias("__attachInterrupt")));
|
|
extern void detachInterrupt(uint8_t pin) __attribute__ ((weak, alias("__detachInterrupt")));
|
|
|