mirror of
https://github.com/0xFEEDC0DE64/arduino-esp32.git
synced 2025-11-04 08:01:38 +01:00
53 lines
1.7 KiB
C++
53 lines
1.7 KiB
C++
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
// Sketch shows how to use SimpleBLE to advertise the name of the device and change it on the press of a button
|
|
// Useful if you want to advertise some sort of message
|
|
// Button is attached between GPIO 0 and GND, and the device name changes each time the button is pressed
|
|
|
|
#include "SimpleBLE.h"
|
|
|
|
#if !defined(CONFIG_BT_ENABLED) || !defined(CONFIG_BLUEDROID_ENABLED)
|
|
#error Bluetooth is not enabled! Please run `make menuconfig` to and enable it
|
|
#endif
|
|
|
|
SimpleBLE ble;
|
|
|
|
void onButton(){
|
|
String out = "BLE32 name: ";
|
|
out += String(millis() / 1000);
|
|
Serial.println(out);
|
|
ble.begin(out);
|
|
}
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
Serial.setDebugOutput(true);
|
|
pinMode(0, INPUT_PULLUP);
|
|
Serial.print("ESP32 SDK: ");
|
|
Serial.println(ESP.getSdkVersion());
|
|
ble.begin("ESP32 SimpleBLE");
|
|
Serial.println("Press the button to change the device's name");
|
|
}
|
|
|
|
void loop() {
|
|
static uint8_t lastPinState = 1;
|
|
uint8_t pinState = digitalRead(0);
|
|
if(!pinState && lastPinState){
|
|
onButton();
|
|
}
|
|
lastPinState = pinState;
|
|
while(Serial.available()) Serial.write(Serial.read());
|
|
}
|