Change IDENTITY
Change password
Upload sketch and enjoy!
After sucessful assign of IP address, board will connect to HTTP page on internet to verify your authentification
Board will auto reconnect to Eduroam if it lost connection

Tested locations

University	Board	Method	Result
Technical University in Košice (Slovakia)	ESP32 Devkit v1	PEAP + MsCHAPv2	Working
Technical University in Košice (Slovakia)	ESP32 Devmodule v4	PEAP + MsCHAPv2	Working on 6th attempt in loop
Slovak Technical University in Bratislava (Slovakia)	ESP32 Devkit v1	PEAP + MsCHAPv2	Working
University of Antwerp (Belgium)	Lolin32	PEAP + MsCHAPv2	Working
UPV Universitat Politècnica de València (Spain)	ESP32 Devmodule v4	PEAP + MsCHAPv2	Working
Local Zeroshell powered network	ESP32 Devkit v1	PEAP + MsCHAPv2	Not working
Hasselt University (Belgium)	xxx	PEAP + MsCHAPv2	Working with fix sketch
Universidad de Granada (Spain)	Lolin D32 Pro	PEAP + MsCHAPv2	Working
Universidad de Granada (Spain)	Lolin D32	PEAP + MsCHAPv2	Working
Universidade Federal de Santa Catarina (Brazil)	xxx	EAP-TTLS + MsCHAPv2	Working
University of Central Florida (Orlando, Florida)	ESP32 Built-in OLED – Heltec WiFi Kit 32	PEAP + MsCHAPv2	Working
Université de Montpellier (France)	NodeMCU-32S	PEAP + MsCHAPv2	Working

Common errors - Switch to Debug mode for Serial monitor prints

Error	Appearance	Solution
wifi: Set status to INIT	Frequent	Hold EN button for few seconds
HANDSHAKE_TIMEOUT	Rare	Bug was found under Zeroshell RADIUS authentization - Unsucessful connection
AUTH_EXPIRE	Common	In the case of weak wifi network signal, this error is quite common, bring your device closer to AP
ASSOC_EXPIRE	Rare	-