mirror of
https://github.com/0xFEEDC0DE64/arduino-esp32.git
synced 2025-10-31 14:11:42 +01:00
63 lines
2.5 KiB
C
Executable File
63 lines
2.5 KiB
C
Executable File
/*******************************************************************************
|
|
Copyright (c) 2009-2013 by Tensilica Inc. ALL RIGHTS RESERVED.
|
|
These coded instructions, statements, and computer programs are the
|
|
copyrighted works and confidential proprietary information of Tensilica Inc.
|
|
They may not be modified, copied, reproduced, distributed, or disclosed to
|
|
third parties in any manner, medium, or form, in whole or in part, without
|
|
the prior written consent of Tensilica Inc.
|
|
--------------------------------------------------------------------------------
|
|
|
|
lcd-splc780d-4bitmode-board.h Board-specific LCD info for these boards:
|
|
Avnet AV110 (XT-AV110)
|
|
Xilinx ML605 (XT-ML605)
|
|
Xilinx KC705 (XT-KC705)
|
|
|
|
Interface between board-independent driver and board-specific header.
|
|
|
|
This is used by a board-independent SPLC780D LCD controller (4 bit mode)
|
|
driver to obtain board-specific information about LCD displays on the board,
|
|
such as the controller register base address and spacing (a function of how
|
|
the address lines are connected on the board) and length of the visible window
|
|
of the display (a function of the LCD panel the controller drives).
|
|
The driver doesnot refer directly to the board-specific header, which therefore is not
|
|
constrained to use macro names consistent with other boards.
|
|
|
|
!! Must not contain any board-specific macro names (only controller specific) !!
|
|
|
|
Included at compile-time via an include path specific to the board.
|
|
|
|
The listed boards contain a single MYTech MOC-16216B-B display driven by
|
|
a Sunplus SPLC870D controller.
|
|
|
|
*******************************************************************************/
|
|
|
|
#ifndef _LCD_SPLC780D_4BIT_BOARD_H
|
|
#define _LCD_SPLC780D_4BIT_BOARD_H
|
|
|
|
#include <xtensa/board.h> /* Board info */
|
|
|
|
|
|
/* Base address of the controller's registers. */
|
|
#ifdef SPLC780D_4BIT_VADDR
|
|
#define SPLC780D_4BIT_REGBASE SPLC780D_4BIT_VADDR
|
|
#endif
|
|
|
|
/*
|
|
The controller's registers are connected at word addresses on these boards.
|
|
Each byte-wide register appears as the least-significant-byte (LSB) of the
|
|
word regardless of the endianness of the processor (so if using word accesses
|
|
then endianness doesn't matter).
|
|
*/
|
|
#define SPLC780D_4BIT_REGSPACING 4
|
|
typedef unsigned splc780d_4bit_reg_t;
|
|
|
|
/* Include generic information shared by all boards that use this device. */
|
|
#include <xtensa/lcd-splc780d-4bitmode.h>
|
|
|
|
|
|
/* Display limits of the LCD panel. */
|
|
#define DISPLAY_VISIBLE_LEN 16 /* length (chars) of visible window */
|
|
|
|
#endif /* _LCD_SPLC780D_4BIT_BOARD_H */
|
|
|