esp-idf/components/partition_table/Kconfig.projbuild

menu "Partition Table"

choice PARTITION_TABLE_TYPE
    prompt "Partition Table"
    default PARTITION_TABLE_SINGLE_APP
    help
        The partition table to flash to the ESP32. The partition table
        determines where apps, data and other resources are expected to
        be found.

        The predefined partition table CSV descriptions can be found
        in the components/partition_table directory. Otherwise it's
        possible to create a new custom partition CSV for your application.

config PARTITION_TABLE_SINGLE_APP
    bool "Single factory app, no OTA"
config PARTITION_TABLE_TWO_OTA
    bool "Factory app, two OTA definitions"
config PARTITION_TABLE_CUSTOM
    bool "Custom partition table CSV"
endchoice

config PARTITION_TABLE_CUSTOM_FILENAME
    string "Custom partition CSV file" if PARTITION_TABLE_CUSTOM
    default partitions.csv
    help
        Name of the custom partition CSV filename. This path is evaluated
        relative to the project root directory.

config PARTITION_TABLE_FILENAME
       string
       default partitions_singleapp.csv if PARTITION_TABLE_SINGLE_APP && !ESP32_ENABLE_COREDUMP_TO_FLASH
       default partitions_singleapp_coredump.csv if PARTITION_TABLE_SINGLE_APP && ESP32_ENABLE_COREDUMP_TO_FLASH
       default partitions_two_ota.csv if PARTITION_TABLE_TWO_OTA && !ESP32_ENABLE_COREDUMP_TO_FLASH
       default partitions_two_ota_coredump.csv if PARTITION_TABLE_TWO_OTA && ESP32_ENABLE_COREDUMP_TO_FLASH
       default PARTITION_TABLE_CUSTOM_FILENAME if PARTITION_TABLE_CUSTOM

config PARTITION_TABLE_OFFSET
    hex "Offset of partition table"
    default 0x8000
    help
        The address of partition table (by default 0x8000).
        Allows you to move the partition table, it gives more space for the bootloader.
        Note that the bootloader and app will both need to be compiled with the same PARTITION_TABLE_OFFSET value.

        This number should be a multiple of 0x1000.

        Note that partition offsets in the partition table CSV file may need to be changed if this value is set to a higher value. To have
        each partition offset adapt to the configured partition table offset, leave all partition offsets blank in the CSV file.

config PARTITION_TABLE_MD5
    bool "Generate an MD5 checksum for the partition table"
    default y
    help
        Generate an MD5 checksum for the partition table for protecting the
        integrity of the table. The generation should be turned off for legacy
        bootloaders which cannot recognize the MD5 checksum in the partition
        table.

endmenu
Initial public version 2016-08-17 23:08:22 +08:00			`menu "Partition Table"`

Update several Kconfig files to make help texts compatible with ReST 2017-08-21 00:01:03 +08:00			`choice PARTITION_TABLE_TYPE`
phy init data: Read PHY init data partition offset from menuconfig 2016-11-16 12:22:32 +11:00			`prompt "Partition Table"`
			`default PARTITION_TABLE_SINGLE_APP`
			`help`
			`The partition table to flash to the ESP32. The partition table`
			`determines where apps, data and other resources are expected to`
			`be found.`
Initial public version 2016-08-17 23:08:22 +08:00
phy init data: Read PHY init data partition offset from menuconfig 2016-11-16 12:22:32 +11:00			`The predefined partition table CSV descriptions can be found`
			`in the components/partition_table directory. Otherwise it's`
			`possible to create a new custom partition CSV for your application.`
Initial public version 2016-08-17 23:08:22 +08:00
			`config PARTITION_TABLE_SINGLE_APP`
phy init data: Read PHY init data partition offset from menuconfig 2016-11-16 12:22:32 +11:00			`bool "Single factory app, no OTA"`
Initial public version 2016-08-17 23:08:22 +08:00			`config PARTITION_TABLE_TWO_OTA`
phy init data: Read PHY init data partition offset from menuconfig 2016-11-16 12:22:32 +11:00			`bool "Factory app, two OTA definitions"`
Initial public version 2016-08-17 23:08:22 +08:00			`config PARTITION_TABLE_CUSTOM`
phy init data: Read PHY init data partition offset from menuconfig 2016-11-16 12:22:32 +11:00			`bool "Custom partition table CSV"`
Initial public version 2016-08-17 23:08:22 +08:00			`endchoice`

			`config PARTITION_TABLE_CUSTOM_FILENAME`
phy init data: Read PHY init data partition offset from menuconfig 2016-11-16 12:22:32 +11:00			`string "Custom partition CSV file" if PARTITION_TABLE_CUSTOM`
			`default partitions.csv`
			`help`
			`Name of the custom partition CSV filename. This path is evaluated`
			`relative to the project root directory.`
Initial public version 2016-08-17 23:08:22 +08:00
			`config PARTITION_TABLE_FILENAME`
phy init data: Read PHY init data partition offset from menuconfig 2016-11-16 12:22:32 +11:00			`string`
esp32: Add core dump saving to flash feature Complimentary changes: 1) Partition table definitions files with core dump partition 2) Special sub-type for core dump partition 3) Special version of spi_flash_xxx 4) espcoredump.py is script to get core dump from flash and print useful info 5) FreeRTOS API was extended to get tasks snapshots 2016-12-22 02:56:23 +03:00			`default partitions_singleapp.csv if PARTITION_TABLE_SINGLE_APP && !ESP32_ENABLE_COREDUMP_TO_FLASH`
			`default partitions_singleapp_coredump.csv if PARTITION_TABLE_SINGLE_APP && ESP32_ENABLE_COREDUMP_TO_FLASH`
			`default partitions_two_ota.csv if PARTITION_TABLE_TWO_OTA && !ESP32_ENABLE_COREDUMP_TO_FLASH`
			`default partitions_two_ota_coredump.csv if PARTITION_TABLE_TWO_OTA && ESP32_ENABLE_COREDUMP_TO_FLASH`
phy init data: Read PHY init data partition offset from menuconfig 2016-11-16 12:22:32 +11:00			`default PARTITION_TABLE_CUSTOM_FILENAME if PARTITION_TABLE_CUSTOM`
Initial public version 2016-08-17 23:08:22 +08:00
partition_table: Expanding the space under the bootloader Allows you to move the partition table, it gives more space for the bootloader. Added a new utility - parttool.py. This utility can search for the offset and/or size of the partitions by name and type/subtype. Use for getting APP_OFFSET and PHY_DATA_OFFSET. The linker(esp32.bootloader.ld) made changes that allow you to write a custom bootloader code more. TW14125 2018-04-19 09:42:26 +05:00			`config PARTITION_TABLE_OFFSET`
			`hex "Offset of partition table"`
			`default 0x8000`
			`help`
			`The address of partition table (by default 0x8000).`
			`Allows you to move the partition table, it gives more space for the bootloader.`
			`Note that the bootloader and app will both need to be compiled with the same PARTITION_TABLE_OFFSET value.`
Initial public version 2016-08-17 23:08:22 +08:00
docs: Add more ReST-isms in secure boot & flash encryption docs (Original version of these docs were in Markdown.) 2018-07-13 16:44:11 +10:00			`This number should be a multiple of 0x1000.`

partition_table: Hard error if CSV contains invalid/overlapping offsets Based on report on forum here: https://esp32.com/viewtopic.php?f=13&t=6382&p=27514 Previous versions were much more relaxed about what could be in the partition table, erroring out avoids unexpected changes on upgrade like different partition offsets. 2018-07-12 11:32:58 +10:00			`Note that partition offsets in the partition table CSV file may need to be changed if this value is set to a higher value. To have`
			`each partition offset adapt to the configured partition table offset, leave all partition offsets blank in the CSV file.`
docs: Add more ReST-isms in secure boot & flash encryption docs (Original version of these docs were in Markdown.) 2018-07-13 16:44:11 +10:00
partition_table: Optionally disable the MD5 checksum in partition tables 2018-02-16 11:12:16 +01:00			`config PARTITION_TABLE_MD5`
			`bool "Generate an MD5 checksum for the partition table"`
			`default y`
			`help`
			`Generate an MD5 checksum for the partition table for protecting the`
			`integrity of the table. The generation should be turned off for legacy`
			`bootloaders which cannot recognize the MD5 checksum in the partition`
			`table.`

Initial public version 2016-08-17 23:08:22 +08:00			`endmenu`