esp-idf/tools/unit-test-app/partition_table_unit_test_app.csv

# Special partition table for unit test app
#
# Name,     Type, SubType, Offset,   Size, Flags
# Note: if you change the phy_init or app partition offset, make sure to change the offset in Kconfig.projbuild
nvs,        data, nvs,     0x9000,  0x4000
otadata,    data, ota,     0xd000,  0x2000
phy_init,   data, phy,     0xf000,  0x1000
factory,    0,    0,       0x10000, 0x240000
# these OTA partitions are used for tests, but can't fit real OTA apps in them
# (done this way to reduce total flash usage.)
ota_0,      0,    ota_0,   ,        64K
ota_1,      0,    ota_1,   ,        64K
# flash_test partition used for SPI flash tests, WL FAT tests, and SPIFFS tests
flash_test, data, fat,     ,        528K

# Note: still 1MB of a 4MB flash left free for some other purpose
unit tests: Use a unit test app partition table, configure spi_flash to use data partition 2017-02-21 13:40:42 +11:00			`# Special partition table for unit test app`
			`#`
			`# Name, Type, SubType, Offset, Size, Flags`
			`# Note: if you change the phy_init or app partition offset, make sure to change the offset in Kconfig.projbuild`
			`nvs, data, nvs, 0x9000, 0x4000`
			`otadata, data, ota, 0xd000, 0x2000`
			`phy_init, data, phy, 0xf000, 0x1000`
unit test app: Require 4MB flash PSRAM config unit tests had outgrown the 0x14000 byte allocated factory size. 2018-05-25 12:16:26 +10:00			`factory, 0, 0, 0x10000, 0x240000`
unit tests: Shrink unit test partition table so tests can run on 2MB of flash 2017-04-13 17:37:35 +10:00			`# these OTA partitions are used for tests, but can't fit real OTA apps in them`
unit test app: Require 4MB flash PSRAM config unit tests had outgrown the 0x14000 byte allocated factory size. 2018-05-25 12:16:26 +10:00			`# (done this way to reduce total flash usage.)`
unit-test-app: increase space for factory partition to 1280K 2017-06-15 17:58:19 +08:00			`ota_0, 0, ota_0, , 64K`
			`ota_1, 0, ota_1, , 64K`
Add SPIFFS Component to IDF 2017-09-07 17:37:59 +03:00			`# flash_test partition used for SPI flash tests, WL FAT tests, and SPIFFS tests`
unit tests: change type of flash_test partition to ‘fat’ This change makes the spi_flash test partition usable for WL and FATFS tests. 2017-05-04 16:42:22 +08:00			`flash_test, data, fat, , 528K`
unit test app: Require 4MB flash PSRAM config unit tests had outgrown the 0x14000 byte allocated factory size. 2018-05-25 12:16:26 +10:00
			`# Note: still 1MB of a 4MB flash left free for some other purpose`