esp-idf/components/driver/Kconfig

menu "Driver Configurations"

    orsource "./twai/Kconfig.twai"

    menu "Legacy ADC Driver Configuration"

        config ADC_DISABLE_DAC
            depends on SOC_DAC_SUPPORTED
            bool "Disable DAC when ADC2 is used on GPIO 25 and 26"
            default y
            help
                If this is set, the ADC2 driver will disable the output of the DAC corresponding to the specified
                channel. This is the default value.

                For testing, disable this option so that we can measure the output of DAC by internal ADC.

        config ADC_SUPPRESS_DEPRECATE_WARN
            bool "Suppress legacy driver deprecated warning"
            default n
            help
                Wether to suppress the deprecation warnings when using legacy adc driver (driver/adc.h).
                If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
                you can enable this option.

        menu "Legacy ADC Calibration Configuration"

            config ADC_CAL_EFUSE_TP_ENABLE
                depends on IDF_TARGET_ESP32
                bool "Use Two Point Values"
                default "y"
                help
                    Some ESP32s have Two Point calibration values burned into eFuse BLOCK3.
                    This option will allow the ADC calibration component to characterize the
                    ADC-Voltage curve using Two Point values if they are available.

            config ADC_CAL_EFUSE_VREF_ENABLE
                depends on IDF_TARGET_ESP32
                bool "Use eFuse Vref"
                default "y"
                help
                    Some ESP32s have Vref burned into eFuse BLOCK0. This option will allow
                    the ADC calibration component to characterize the ADC-Voltage curve using
                    eFuse Vref if it is available.

            config ADC_CAL_LUT_ENABLE
                depends on IDF_TARGET_ESP32
                bool "Use Lookup Tables"
                default "y"
                help
                    This option will allow the ADC calibration component to use Lookup Tables
                    to correct for non-linear behavior in 11db attenuation. Other attenuations
                    do not exhibit non-linear behavior hence will not be affected by this option.

            config ADC_CALI_SUPPRESS_DEPRECATE_WARN
                bool "Suppress legacy driver deprecated warning"
                default n
                help
                    Wether to suppress the deprecation warnings when using legacy adc calibration
                    driver (esp_adc_cal.h).
                    If you want to continue using the legacy driver, and don't want to see related
                    deprecation warnings, you can enable this option.

        endmenu # Legacy ADC Calibration Configuration
    endmenu  # Legacy ADC Driver Configuration

    menu "Legacy MCPWM Driver Configurations"
        depends on SOC_MCPWM_SUPPORTED
        config MCPWM_SUPPRESS_DEPRECATE_WARN
            bool "Suppress legacy driver deprecated warning"
            default n
            help
                Wether to suppress the deprecation warnings when using legacy MCPWM driver (driver/mcpwm.h).
                If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
                you can enable this option.
    endmenu # Legacy MCPWM Driver Configurations

    menu "Legacy Timer Group Driver Configurations"
        depends on SOC_GPTIMER_SUPPORTED
        config GPTIMER_SUPPRESS_DEPRECATE_WARN
            bool "Suppress legacy driver deprecated warning"
            default n
            help
                Wether to suppress the deprecation warnings when using legacy timer group driver (driver/timer.h).
                If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
                you can enable this option.

    endmenu # Legacy Timer Group Driver Configurations

endmenu  # Driver configurations
mcpwm: rename MCPWM_ISR_IN_IRAM to MCPWM_ISR_IRAM_SAFE 2022-05-28 17:27:02 +08:00			`menu "Driver Configurations"`
fix(adc2): fix cct and xpd configurations to improve precision of ADCs 2018-03-07 15:04:43 +08:00
fix(mcpwm): reset GPIO used by generator after delete Closes https://github.com/espressif/esp-idf/issues/12980 2024-01-31 16:07:51 +08:00			`orsource "./twai/Kconfig.twai"`

			`menu "Legacy ADC Driver Configuration"`
fix(adc2): fix cct and xpd configurations to improve precision of ADCs 2018-03-07 15:04:43 +08:00
Rename Kconfig options (components/driver) 2019-04-29 14:22:57 +02:00			`config ADC_DISABLE_DAC`
esp_adc: new esp_adc component and adc drivers 2022-07-15 12:52:44 +08:00			`depends on SOC_DAC_SUPPORTED`
Correct Kconfigs according to the coding style 2019-01-25 17:10:53 +01:00			`bool "Disable DAC when ADC2 is used on GPIO 25 and 26"`
			`default y`
			`help`
Rename Kconfig options (components/driver) 2019-04-29 14:22:57 +02:00			`If this is set, the ADC2 driver will disable the output of the DAC corresponding to the specified`
Correct Kconfigs according to the coding style 2019-01-25 17:10:53 +01:00			`channel. This is the default value.`
bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion. refactor structure of ``rtc_module.c`` to make it more clearly. Closes https://github.com/espressif/esp-idf/issues/1517 2018-01-24 18:46:34 +08:00
Correct Kconfigs according to the coding style 2019-01-25 17:10:53 +01:00			`For testing, disable this option so that we can measure the output of DAC by internal ADC.`
bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion. refactor structure of ``rtc_module.c`` to make it more clearly. Closes https://github.com/espressif/esp-idf/issues/1517 2018-01-24 18:46:34 +08:00
esp_adc: new esp_adc component and adc drivers 2022-07-15 12:52:44 +08:00			`config ADC_SUPPRESS_DEPRECATE_WARN`
			`bool "Suppress legacy driver deprecated warning"`
			`default n`
			`help`
			`Wether to suppress the deprecation warnings when using legacy adc driver (driver/adc.h).`
			`If you want to continue using the legacy driver, and don't want to see related deprecation warnings,`
			`you can enable this option.`

			`menu "Legacy ADC Calibration Configuration"`

			`config ADC_CAL_EFUSE_TP_ENABLE`
			`depends on IDF_TARGET_ESP32`
			`bool "Use Two Point Values"`
			`default "y"`
			`help`
			`Some ESP32s have Two Point calibration values burned into eFuse BLOCK3.`
			`This option will allow the ADC calibration component to characterize the`
			`ADC-Voltage curve using Two Point values if they are available.`

			`config ADC_CAL_EFUSE_VREF_ENABLE`
			`depends on IDF_TARGET_ESP32`
			`bool "Use eFuse Vref"`
			`default "y"`
			`help`
			`Some ESP32s have Vref burned into eFuse BLOCK0. This option will allow`
			`the ADC calibration component to characterize the ADC-Voltage curve using`
			`eFuse Vref if it is available.`

			`config ADC_CAL_LUT_ENABLE`
			`depends on IDF_TARGET_ESP32`
			`bool "Use Lookup Tables"`
			`default "y"`
			`help`
			`This option will allow the ADC calibration component to use Lookup Tables`
			`to correct for non-linear behavior in 11db attenuation. Other attenuations`
			`do not exhibit non-linear behavior hence will not be affected by this option.`

			`config ADC_CALI_SUPPRESS_DEPRECATE_WARN`
			`bool "Suppress legacy driver deprecated warning"`
			`default n`
			`help`
			`Wether to suppress the deprecation warnings when using legacy adc calibration`
			`driver (esp_adc_cal.h).`
			`If you want to continue using the legacy driver, and don't want to see related`
			`deprecation warnings, you can enable this option.`

fix(mcpwm): reset GPIO used by generator after delete Closes https://github.com/espressif/esp-idf/issues/12980 2024-01-31 16:07:51 +08:00			`endmenu # Legacy ADC Calibration Configuration`
			`endmenu # Legacy ADC Driver Configuration`
fix(adc2): fix cct and xpd configurations to improve precision of ADCs 2018-03-07 15:04:43 +08:00
fix(mcpwm): reset GPIO used by generator after delete Closes https://github.com/espressif/esp-idf/issues/12980 2024-01-31 16:07:51 +08:00			`menu "Legacy MCPWM Driver Configurations"`
			`depends on SOC_MCPWM_SUPPORTED`
			`config MCPWM_SUPPRESS_DEPRECATE_WARN`
			`bool "Suppress legacy driver deprecated warning"`
			`default n`
			`help`
			`Wether to suppress the deprecation warnings when using legacy MCPWM driver (driver/mcpwm.h).`
			`If you want to continue using the legacy driver, and don't want to see related deprecation warnings,`
			`you can enable this option.`
			`endmenu # Legacy MCPWM Driver Configurations`
TWAI: ISR runs when cache is disabled This commit adds the feature where the TWAI ISR will continue to run even if the cache is disabled. Whilst cache is disabled, any received messages will go into the RX queue, and any pending TX messages in the TX queue will be transmitted. This feature should be enabled using the CONFIG_TWAI_ISR_IN_IRAM option. 2020-08-04 12:52:10 +08:00
feat(gptimer): basic driver support on esp32c5 2024-02-18 18:12:03 +08:00			`menu "Legacy Timer Group Driver Configurations"`
			`depends on SOC_GPTIMER_SUPPORTED`
			`config GPTIMER_SUPPRESS_DEPRECATE_WARN`
			`bool "Suppress legacy driver deprecated warning"`
			`default n`
			`help`
			`Wether to suppress the deprecation warnings when using legacy timer group driver (driver/timer.h).`
			`If you want to continue using the legacy driver, and don't want to see related deprecation warnings,`
			`you can enable this option.`

			`endmenu # Legacy Timer Group Driver Configurations`

i2s: Introduced a brand new driver 2021-08-18 19:45:51 +08:00			`endmenu # Driver configurations`